Black & Decker BDP2600 How to Apply Chemicals/cleaning Solvents, Place other end of chemical hose

Page 11

* CAUTION: The high pressure spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto strip- ing and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.

1.Pull quick-

connect cou-

pler back and insert nozzle.

2. Release quick- connect cou- pler and twist

nozzle to make sure it is secure in coupler.

WARNING: Flying object could cause risk of serious injury. Ensure nozzle is completely inserted in quick- connect socket and quick-connect snap ring is fully engaged (forward) before squeezing gun trigger.

How to Apply Chemicals/cleaning Solvents

Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

To Apply Chemicals:

1.

Press chemical

 

P

 

hose

(P)

onto

 

 

 

 

 

barbed

fitting (T)

 

 

 

located near high

T

 

 

pressure

hose

 

 

 

connection

of

 

 

 

pump as shown.

 

 

2. Place other end of chemical hose

 

with filter on it into container hold-

 

ing

chemical/cleaning

solution.

 

NOTE: For every 7 gallons of water

 

pumped 1 gallon of chemical/

 

cleaning solution will be used.

3. Install low pressure (black) noz-

 

zle into quick connect fitting of

 

spray wand, see How To Use

 

Spray Wand paragraph in this sec-

 

tion.

 

 

 

 

 

4. After use of chemicals, place

 

chemical hose into container of

 

clean water and draw clean water

 

through chemical

injection sys-

tem to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps dam- aged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.

WARNING: To reduce the risk of injury, read the pressure washer instruction manual and the engine instruction manual before starting pressure washer.

DANGER: Risk of fluid injection and laceration. When using the high- pressure setting, DO NOT allow the high-pressure spray to come in con- tact with unprotected skin, eyes, or with any pets or animals. Serious injury will occur.

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

WARNING: Risk of Fire, Asphyxiation and Burn. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

•Never fill fuel tank completely. Fill tank to 1/2 inch )12.7 mm) below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

•Neverrunengineindoors­orinenclosed,­ poorly venti­lat­ed­ areas. Engine­ exhaust contains­ carbon monox­ide,­ an odorless

11-­ ENG

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Copyright 2010 Black & Decker­ VEA EL Español EN LA ContraportadaCat No. BDP2600 What can happen Safety Guidelines DefinitionsConsumer safety information Important safety instructions How to prevent itBreathing exhaust­ fumes will cause What can happen How to prevent itOr animals Safety glasses. Wear protectiveNever point wand at or spray people Do not use chlorine bleach or any other corrosive compound At your destination Fuel or oil can leak or spill and couldResult in fire or breathing hazard Protect against damage­ to vehicleRead and save these instructions Carton contents Roll the unit off the carton and discard carton Assembly instructionsOperaTING Instructions Changing Nozzles on Spray Wand Pressure AdjustmentsPerature inside the pump. The valve will then close Place other end of chemical hose How to Apply Chemicals/cleaning SolventsInstall low pressure black noz To Apply Chemicals Press chemical HoseConnect high pressure hose to pump outlet Deadly gasDo not use hot water, use cold water only Release trigger to stop water flow MaintenanceStorage Pressure Washer ACCESSORIESSpecifications Service InformationResponsibility of Original Purchaser Initial User Warranty on Product Components Excluding PumpWarranty on Pump This Warranty does not CoverSee Nozzle Cleaning instruc Trouble shooting guideProblem See How to Use Spray WandSee Nozzle Cleaning para Worn drain plug o-ring Pump Service Representative at Loose drain plugOil leaking ENG­ Manual DE Instrucciones Instrucciones Importantes DE Seguridad Definiciones DE Normas DE SeguridadInformación DE Seguridad Para EL Consumidor Cómo evitarlo Peligro Riesgo de explosión o incendio ¿Qué puede suceder?¿Qué puede suceder? Cómo evitarlo Peligro Riesgo DE Inyección DE Líquido y laceraciónPeligro Riesgo DE Lesión POR Pulverización Transportar o almacenar la unidad Entonces, hale de él rápidamentePara evitar el retroceso y que se Peligro Riesgo de lesión o daño a la propiedad alCompresores y el equipo similar Flanco para ver la presión correctaDel neumático Nota Los tanques de aire, losAdvertencia Riesgo DE Lesión POR Levantar Mucho Peso Advertencia Riesgo de quemadura química ¿Qué puede suceder?Salida de la bomba Entrada de la bomba Contenido DE LA CajaInstrucciones Para Armar Boquillas de conexión rápida Portaboquillas ManillarInstrucciones DE Operación Boquillas para la varilla pulverizadora Para bajar la temperatura. Luego se cierra la válvulaRegulación de la Presión Cómo Emplear Productos Químicos y Solventes Para Limpieza No use agua caliente, sólo agua fría ArranqueEncendido Conecte la manguera de alta presión a la salida de la bombaApagado MantenimientoAlmacenaje Lavadora a Presión AccesoriosEsta Garantía no Cubre EspecificacionesGarantía Limitada Para LA Bomba Responsabilidad DEL Comprador Original Usuario inicial39-­ SP Sección Mantenimiento Guía DE Diagnóstico DE ProblemasProblema Causa Corrección Ción OperaciónOperación Químicos PresiónPulsa 43-­ SP

BDP2600 specifications

The Black & Decker BDP2600 is a versatile and powerful tool that has garnered attention in the realm of home improvement and DIY enthusiasts. This tool is specifically designed to meet the needs of both amateur and professional users, offering a range of features and technologies that enhance its performance and usability.

One of the standout features of the BDP2600 is its powerful motor that delivers high performance for a variety of applications. Whether you're drilling, sanding, or performing other tasks, the motor ensures efficient operation, reducing the time and effort required to complete projects. The tool's design incorporates an ergonomic handle, providing comfort during prolonged use, which is especially important for users engaged in detailed work.

The BDP2600 is equipped with a variable speed control feature, allowing users to adjust the speed according to the task at hand. This flexibility is crucial when dealing with different materials, as it helps achieve optimal results without compromising on safety. Additionally, a built-in safety lock ensures that the tool can only be activated when intended, reducing the risk of accidents.

Another notable technology in the BDP2600 is its durable construction. Built to withstand the rigors of frequent use, this tool features quality materials that contribute to its longevity. The robust design not only enhances durability but also improves reliability, making it a preferred choice for many DIY projects and professional applications alike.

The BDP2600 also offers an array of attachments and accessories, further increasing its versatility. These attachments allow the tool to perform a wide range of functions, from drilling into various surfaces to sanding and polishing. This multifunctionality makes the BDP2600 a valuable addition to any toolkit.

In conclusion, the Black & Decker BDP2600 stands out for its powerful motor, ergonomic design, variable speed control, safety features, and robust construction. With its extensive range of applications and accessories, it is tailored to meet the diverse demands of users. Whether you are tackling small home repairs or larger renovation projects, the BDP2600 is a reliable and efficient tool that facilitates ease and precision in your work. Its blend of innovation and practicality continues to make it a popular choice in the competitive market of power tools.
Top Page Image Contents