Black & Decker BDP2600 instruction manual Storage

Page 14

Engine

Consult the Engine Owners Manual for the manu­fac­tur­er's­ recommendations for any and all maintenance.

Pump

NOTE: The pump was filled with oil at the factory.

Change pump oil after the first 10 hours of operation and every 250 hours thereafter.

To Check Oil

The oil level should

come to the dot in BB the middle of the sight glass (AA).

How To Change

Pump Oil

1.Loosen pump AA

oil fill plug (BB). CC

2.Place a con-

tainer under the oil drain plug (CC).

3.Remove pump oil drain plug.

4.After oil is drained, replace oil drain plug. Tighten securely.

5.Remove pump oil plug and fill with 8.5 oz. (251 ml) of 30W non deter- gent oil.

6.Replace pump oil plug and tighten securely.

Nozzle Cleaning

If the nozzle becomes clogged with for- eign materials, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instruc- tions:

1.Shut off the pressure washer and turn off the water supply.

2.Pull trigger on gun handle to relieve any water pressure.

3.Disconnect the spray wand from the gun.

4.Remove the high-pressure nozzle from the spray wand. Remove any obstructions with the nozzle clean- ing tool provided and backflush with clean water.

5.Direct water supply into spray wand to backflush loosened particles for 30 seconds.

6.Reassemble the nozzle to the wand.

7.Reconnect spray wand to gun and turn on water supply.

8.Start pressure washer and place spray wand into high pressure set- ting to test.

How to Clean the Water Inlet Filter

This screen filter should be checked periodically and cleaned if necessary.

1.Remove filter by

grasping end and

removing it

from

water

inlet

of

pump as shown.

2. Clean

filter

by flushing it with water on both sides.

3.Re-insert filter into water inlet of pump. NOTE: Cone side faces out.

NOTE: Do not operate pressure washer without filter properly installed.

storage

Engine

Consult the Engine Owners Manual for the manufacturer's recommendations for storage.

Pump

The manufacturer recommends using a pump protector/winterizer when storing the unit for more than 30 days and/or when freezing temperatures are expected. A pump protector/ winterizer is availabe at the store where the pressure washer was purchased. If a pump protector/winterizer is not available, RV antifreeze needs to be run through the pump as outlined in the steps below.

14- ENG­

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Copyright 2010 Black & Decker­ VEA EL Español EN LA ContraportadaCat No. BDP2600 How to prevent it Safety Guidelines DefinitionsConsumer safety information Important safety instructions What can happenWhat can happen How to prevent it Breathing exhaust­ fumes will causeOr animals Safety glasses. Wear protectiveNever point wand at or spray people Do not use chlorine bleach or any other corrosive compound Protect against damage­ to vehicle Fuel or oil can leak or spill and couldResult in fire or breathing hazard At your destinationRead and save these instructions Carton contents Roll the unit off the carton and discard carton Assembly instructionsOperaTING Instructions Changing Nozzles on Spray Wand Pressure AdjustmentsPerature inside the pump. The valve will then close To Apply Chemicals Press chemical Hose How to Apply Chemicals/cleaning SolventsInstall low pressure black noz Place other end of chemical hoseConnect high pressure hose to pump outlet Deadly gasDo not use hot water, use cold water only Maintenance Release trigger to stop water flowStorage Service Information ACCESSORIESSpecifications Pressure WasherThis Warranty does not Cover Warranty on Product Components Excluding PumpWarranty on Pump Responsibility of Original Purchaser Initial UserSee How to Use Spray Wand Trouble shooting guideProblem See Nozzle Cleaning instrucSee Nozzle Cleaning para Worn drain plug o-ring Pump Service Representative at Loose drain plugOil leaking ENG­ Manual DE Instrucciones Instrucciones Importantes DE Seguridad Definiciones DE Normas DE SeguridadInformación DE Seguridad Para EL Consumidor Peligro Riesgo de explosión o incendio ¿Qué puede suceder? Cómo evitarloPeligro Riesgo DE Inyección DE Líquido y laceración ¿Qué puede suceder? Cómo evitarloPeligro Riesgo DE Lesión POR Pulverización Peligro Riesgo de lesión o daño a la propiedad al Entonces, hale de él rápidamentePara evitar el retroceso y que se Transportar o almacenar la unidadNota Los tanques de aire, los Flanco para ver la presión correctaDel neumático Compresores y el equipo similarAdvertencia Riesgo de quemadura química ¿Qué puede suceder? Advertencia Riesgo DE Lesión POR Levantar Mucho PesoBoquillas de conexión rápida Portaboquillas Manillar Contenido DE LA CajaInstrucciones Para Armar Salida de la bomba Entrada de la bombaInstrucciones DE Operación Boquillas para la varilla pulverizadora Para bajar la temperatura. Luego se cierra la válvulaRegulación de la Presión Cómo Emplear Productos Químicos y Solventes Para Limpieza Arranque No use agua caliente, sólo agua fríaConecte la manguera de alta presión a la salida de la bomba EncendidoMantenimiento ApagadoAlmacenaje Accesorios Lavadora a PresiónResponsabilidad DEL Comprador Original Usuario inicial EspecificacionesGarantía Limitada Para LA Bomba Esta Garantía no Cubre39-­ SP Ción Operación Guía DE Diagnóstico DE ProblemasProblema Causa Corrección Sección MantenimientoQuímicos Presión OperaciónPulsa 43-­ SP

BDP2600 specifications

The Black & Decker BDP2600 is a versatile and powerful tool that has garnered attention in the realm of home improvement and DIY enthusiasts. This tool is specifically designed to meet the needs of both amateur and professional users, offering a range of features and technologies that enhance its performance and usability.

One of the standout features of the BDP2600 is its powerful motor that delivers high performance for a variety of applications. Whether you're drilling, sanding, or performing other tasks, the motor ensures efficient operation, reducing the time and effort required to complete projects. The tool's design incorporates an ergonomic handle, providing comfort during prolonged use, which is especially important for users engaged in detailed work.

The BDP2600 is equipped with a variable speed control feature, allowing users to adjust the speed according to the task at hand. This flexibility is crucial when dealing with different materials, as it helps achieve optimal results without compromising on safety. Additionally, a built-in safety lock ensures that the tool can only be activated when intended, reducing the risk of accidents.

Another notable technology in the BDP2600 is its durable construction. Built to withstand the rigors of frequent use, this tool features quality materials that contribute to its longevity. The robust design not only enhances durability but also improves reliability, making it a preferred choice for many DIY projects and professional applications alike.

The BDP2600 also offers an array of attachments and accessories, further increasing its versatility. These attachments allow the tool to perform a wide range of functions, from drilling into various surfaces to sanding and polishing. This multifunctionality makes the BDP2600 a valuable addition to any toolkit.

In conclusion, the Black & Decker BDP2600 stands out for its powerful motor, ergonomic design, variable speed control, safety features, and robust construction. With its extensive range of applications and accessories, it is tailored to meet the diverse demands of users. Whether you are tackling small home repairs or larger renovation projects, the BDP2600 is a reliable and efficient tool that facilitates ease and precision in your work. Its blend of innovation and practicality continues to make it a popular choice in the competitive market of power tools.
Top Page Image Contents