Black & Decker BDP2600 Safety glasses. Wear protective, Never point wand at or spray people

Page 4

DANGER: RISK of FLUID INJECTION and Laceration

what can happen

how to prevent it

• Your pressure washer operates at • fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE • CUT! See a physician immediately!

Inspect the high-pressure hose regularly. Replace the hose immediately if it is damaged, worn, has melted from contacting the engine, or shows any signs of cracks, bubbles, pinholes, or other leakage. Never grasp a high-pressure hose that is leaking or damaged.

Never touch, grasp or attempt to cover a pinhole or similar water leak on the high-pressure hose. The stream of water IS under high pressure and WILL penetrate skin.

•Never place hands in front of nozzle.

•Direct spray away from self and others.

•Make sure hose and fittings­ are tightened and in good condition. Never hold onto the hose or fittings during oper­a­tion­.

•Do not allow hose to contact muffler.

•Never attach or remove wand or hose fittings while system­ is pressurized.

• Injuries can result if system pressure • is not reduced before attempting maintenance or disassembly.

To relieve system­ pressure,­ shut off engine, turn off water supply­ and pull gun trigger until water stops flowing.

 

 

 

• Use only hoses and accessories

 

 

 

rated for pressure higher than your

 

 

 

pressure washer's psi.

 

 

DANGER: RISK OF INJURY FROM SPRAY

 

 

 

 

what can happen

how to prevent it

 

 

• High-velocity fluid spray can cause

• Always wear ANSI-approved Z87.1

 

objects to break, propelling particles

safety glasses. Wear protective

 

at high speed.

clothing to protect against accidental

• Light or unsecured objects can

spraying.

 

become hazardous projectiles.

• Never point wand at or spray people

 

 

 

or animals.

• Always secure trigger lock when wand is not in service to prevent accidental operation.

• Never permanently secure trigger in pull-back (open) position.

4- ENG­

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cat No. BDP2600 VEA EL Español EN LA ContraportadaCopyright 2010 Black & Decker­ Safety Guidelines Definitions Consumer safety information Important safety instructionsHow to prevent it What can happenWhat can happen How to prevent it Breathing exhaust­ fumes will causeNever point wand at or spray people Safety glasses. Wear protectiveOr animals Do not use chlorine bleach or any other corrosive compound Fuel or oil can leak or spill and could Result in fire or breathing hazardProtect against damage­ to vehicle At your destinationRead and save these instructions Carton contents OperaTING Instructions Assembly instructionsRoll the unit off the carton and discard carton Perature inside the pump. The valve will then close Pressure AdjustmentsChanging Nozzles on Spray Wand How to Apply Chemicals/cleaning Solvents Install low pressure black nozTo Apply Chemicals Press chemical Hose Place other end of chemical hoseDo not use hot water, use cold water only Deadly gasConnect high pressure hose to pump outlet Maintenance Release trigger to stop water flowStorage ACCESSORIES SpecificationsService Information Pressure WasherWarranty on Product Components Excluding Pump Warranty on PumpThis Warranty does not Cover Responsibility of Original Purchaser Initial UserTrouble shooting guide ProblemSee How to Use Spray Wand See Nozzle Cleaning instrucSee Nozzle Cleaning para Oil leaking Pump Service Representative at Loose drain plugWorn drain plug o-ring ENG­ Manual DE Instrucciones Información DE Seguridad Para EL Consumidor Definiciones DE Normas DE SeguridadInstrucciones Importantes DE Seguridad Peligro Riesgo de explosión o incendio ¿Qué puede suceder? Cómo evitarloPeligro Riesgo DE Inyección DE Líquido y laceración ¿Qué puede suceder? Cómo evitarloPeligro Riesgo DE Lesión POR Pulverización Entonces, hale de él rápidamente Para evitar el retroceso y que sePeligro Riesgo de lesión o daño a la propiedad al Transportar o almacenar la unidadFlanco para ver la presión correcta Del neumáticoNota Los tanques de aire, los Compresores y el equipo similarAdvertencia Riesgo de quemadura química ¿Qué puede suceder? Advertencia Riesgo DE Lesión POR Levantar Mucho PesoContenido DE LA Caja Instrucciones Para ArmarBoquillas de conexión rápida Portaboquillas Manillar Salida de la bomba Entrada de la bombaInstrucciones DE Operación Regulación de la Presión Para bajar la temperatura. Luego se cierra la válvulaBoquillas para la varilla pulverizadora Cómo Emplear Productos Químicos y Solventes Para Limpieza Arranque No use agua caliente, sólo agua fríaConecte la manguera de alta presión a la salida de la bomba EncendidoMantenimiento ApagadoAlmacenaje Accesorios Lavadora a PresiónEspecificaciones Garantía Limitada Para LA BombaResponsabilidad DEL Comprador Original Usuario inicial Esta Garantía no Cubre39-­ SP Guía DE Diagnóstico DE Problemas Problema Causa CorrecciónCión Operación Sección MantenimientoQuímicos Presión OperaciónPulsa 43-­ SP

BDP2600 specifications

The Black & Decker BDP2600 is a versatile and powerful tool that has garnered attention in the realm of home improvement and DIY enthusiasts. This tool is specifically designed to meet the needs of both amateur and professional users, offering a range of features and technologies that enhance its performance and usability.

One of the standout features of the BDP2600 is its powerful motor that delivers high performance for a variety of applications. Whether you're drilling, sanding, or performing other tasks, the motor ensures efficient operation, reducing the time and effort required to complete projects. The tool's design incorporates an ergonomic handle, providing comfort during prolonged use, which is especially important for users engaged in detailed work.

The BDP2600 is equipped with a variable speed control feature, allowing users to adjust the speed according to the task at hand. This flexibility is crucial when dealing with different materials, as it helps achieve optimal results without compromising on safety. Additionally, a built-in safety lock ensures that the tool can only be activated when intended, reducing the risk of accidents.

Another notable technology in the BDP2600 is its durable construction. Built to withstand the rigors of frequent use, this tool features quality materials that contribute to its longevity. The robust design not only enhances durability but also improves reliability, making it a preferred choice for many DIY projects and professional applications alike.

The BDP2600 also offers an array of attachments and accessories, further increasing its versatility. These attachments allow the tool to perform a wide range of functions, from drilling into various surfaces to sanding and polishing. This multifunctionality makes the BDP2600 a valuable addition to any toolkit.

In conclusion, the Black & Decker BDP2600 stands out for its powerful motor, ergonomic design, variable speed control, safety features, and robust construction. With its extensive range of applications and accessories, it is tailored to meet the diverse demands of users. Whether you are tackling small home repairs or larger renovation projects, the BDP2600 is a reliable and efficient tool that facilitates ease and precision in your work. Its blend of innovation and practicality continues to make it a popular choice in the competitive market of power tools.
Top Page Image Contents