Briggs & Stratton 20228, 195764GS High pressure spray may damage fragile items including glass

Page 4

Section 1: Safety Rules

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

CAUTION

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

•DO NOT tamper with governed speed.

•DO NOT operate pressure washer above rated pressure.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

CAUTION

High pressure spray may damage fragile items including glass.

•DO NOT point spray gun at glass when using MAX (pin point) nozzle.

•NEVER aim spray gun at plants.

CAUTION

Improper treatment of pressure washer can damage it and shorten its life.

•If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

•NEVER operate units with broken or missing parts, or without protective housing or covers.

•DO NOT by–pass any safety device on this machine.

•Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

•NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

•Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer.

•This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual del Propietario Safety Rules Table of ContentsEquipment Description When Adding Fuel Operate pressure washer only outdoorsHigh pressure spray may damage fragile items including glass Features and Controls Section Know Your Pressure WasherNozzle Extension with Quick Connect Allows you Pump equipped with Automatic Cool Down SystemAssembly Carton ContentsAttach Handle and Accessory Tray Preparing Pressure Washer for USEAssembly Add Engine Oil and FuelChecklist Before Starting Engine Connect Hose and Water Supply to PumpHOW to USE Your Pressure Washer How to Start Your Pressure WasherOperation Section Pressure Washer LocationHow to Use Accessory Tray How to Stop Your Pressure WasherOperation How to Use ProjectPro Nozzle System Follow these instructions to change ProjectPro nozzlesCleaning and Applying Detergent How to Use the Turbo NozzleTo apply detergent follow these steps Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal ReliefSection Maintenance SpecificationsGeneral Maintenance Recommendations Pressure Washer MaintenanceMaintenance Nozzle MaintenanceRing Maintenance Use wire hereEngine Maintenance Pump MaintenanceChanging Pump Oil Change pump oil as followsStorage Preparing the Unit for StorageStoring the Engine Protecting the PumpTroubleshooting TroubleshootingProblem Cause Correction Consumer Use Years Years or YearReglas de Seguridad Conserve Estas Instrucciones Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadSección 1 Reglas de Seguridad Cuando Añada CombustiblePrecaución Características y Controles Conozca SU Maquina Lavadora DE PresionMontaje MontajePreparando EL Lavador a Alta Presión Para SU USO Agregar Aceite al Motor y Gasolina Sección 3 MontajeColoque la lavadora a presión sobre una superficie nivelada Conecte la Manguera y el Suministro de Agua a la Bomba Lista de Revision Previa al Arranque del MotorOperación Cómo Usar SU Máquina Lavadora a PresiónUbicación del Lavadora a Presión Cómo Darle Arranque a su Máquina Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión Sección 4 OperaciónUtilización de la Bandeja de Accesorios Cómo Usar el Sistema de Boquillas ProjectPro La Presión BajaLa Presión Alta Coloque el pestillo de seguridad de la pistola de rociadoCómo Usar la Boquilla a Chorro Limpieza y Aplicación del DetergentesDetergentes caseros podrían dañar la bomba Para aplicar el detergente, siga los siguientes pasosEnjuage de la Máquina Lavadora a Presión Limpiando el TuboSistema de Enfriamiento Automático Alivio Térmico Para EnjuageMantenimiento EspecificacionesRecomendaciones Generales Mantenimiento DE LA Maquina Lavadora a PresionSección 5 Mantenimiento Mantenimiento de la BoquillaMantenimiento de los Anillos O Mantenimiento de la BombaSección 5 y 6 Mantenimiento y Almacenamiento Mantenimiento DEL MotorPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorDiagnosticos de Averías Reparacion DE AveriasGarantía Limitada

195764GS, 20228 specifications

Briggs & Stratton is a name synonymous with reliable power and performance in small engine solutions. The Briggs & Stratton 20228,195764GS is a prime example of their commitment to innovation, durability, and efficiency. This engine is primarily designed for a variety of applications, including outdoor power equipment and generators, making it an ideal choice for both commercial and residential use.

One of the standout features of the 20228,195764GS is its robust design. Built with high-quality materials, this engine is engineered to withstand the rigors of heavy use. The construction is not only durable but also lightweight, allowing for easy maneuverability and installation. This feature proves advantageous for lawnmowers, pressure washers, and generators, ensuring they operate efficiently under various working conditions.

In terms of power, the 20228,195764GS engine delivers impressive performance, providing reliable output to tackle tough jobs with ease. With an optimized combustion system, it ensures maximum fuel efficiency while minimizing emissions. This is pivotal in meeting environmental standards while also lowering operational costs for users.

Furthermore, the engine integrates advanced technologies that enhance overall functionality. The patented ReadyStart technology simplifies the starting process, eliminating the need for manual choke adjustments. This ensures a hassle-free startup every time, making it user-friendly, especially for those new to operating similar equipment.

Another notable characteristic is the engine’s maintenance-friendly design. When servicing is required, access to components is straightforward, reducing downtime and improving user experience. Briggs & Stratton also emphasizes long-lasting performance, with features like strong air filtration systems to extend engine life by protecting it from contaminants.

The 20228,195764GS is also designed for versatility. It can power various attachments and machines, making it suitable for different tasks, from landscaping to construction purposes. Briggs & Stratton's reputation for quality and innovation is evident in this model, which reflects their commitment to meeting the diverse needs of their customers.

Overall, the Briggs & Stratton 20228,195764GS combines power, efficiency, and ease of use, making it an exceptional choice for consumers looking for a reliable engine solution. This model not only embodies the brand's legacy but also sets a standard for what modern small engines should deliver, ensuring that projects can be completed seamlessly and efficiently.
Top Page Image Contents