Zenoah G3000 manual Safety First, Contents

Page 3

SAFETY FIRST

Instructions contained in warnings within this

manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

CONTENTS

1.Parts location …………………………………4

2.Specifications …………………………………4

3.Symbols on the machine ……………………5

4.For safe operation ……………………………6

5.Installing guide bar and saw chain …………8

6.Fuel and chain oil ……………………………9

7.Operation ……………………………………10

8.Sawing ………………………………………13

9.Maintenance …………………………………16

10.Storage ………………………………………19

Image 3
Contents 2631-93111205 G3000Page Contents Safety FirstSpecifications Parts locationG3000 Symbols on the machine For safe operation Kickback Safety Precautions for Chain SAW Users SE1 SE2 SE3 SE4 SE5 Installing guide bar and saw chainRecommended mixing ratio 25 1 Mix ChartFuel and chain oil FuelOperation OP1 OP2 OP3 OP4 OP5 Fueling the Unit OP1Starting Engine OP6 OP7 OP8 Checking OIL SupplyStopping Engine Needle 11⁄4±1⁄4 OP9 Adjusting Carburetor OP9Felling a Tree SA2 SawingSA1 SA2 To Avoid Kickback SA1SA3 SA4 SA5 Logging and Limbing Cutting an unpillowed logCutting a pillowed log SA6 Maintenance Daily Maintenance SAW ChainMA1 MA2 MA3 MA4 AIR Filter MA5 MA6 MA7 MA8 Guide BARGeneral Monthly Maintenance Fuel FilterMA9 Oiling PortHandle Mounting Joints Storage