Sony MDS-JE770 SELF-DIAGNOSIS Function, Genera l Power requirements, Supplied accessories

MDS-JE770

Genera l

Power requirements

European model:	230 V AC, 50/60Hz
Other models:	110 – 120/220 – 240 V
	AC, 50/60Hz
	Adjustable with voltage
	selector
Power consumption	15 W (0.5 W in standby mode)
Dimensions (approx.)	430 X 95 X 285 mm
	(w/h/d) incl. projecting
	parts and controls
Mass (approx.)	3.1 kg

Supplied accessories

Audio connecting cords (2) Optical cable (1)

Remote commander (remote) (1) R6 (size-AA) batteries (2)

SELF-DIAGNOSIS FUNCTION

The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur, and error codes which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the following box in the instruction manual. For details on how to check error codes during servicing, refer to the following “Procedure for using the Self- Diagnosis Function (Error History Display Mode)”.

Self-diagnosis function

The deck’s self-diagnosis function automatically checks the condition of the MD deck when an error occurs, then issues a three- or five-digit code and an error message on the display. If the code and message alternate, find them in the following table and perform the indicated countermeasure. Should the problem persist, consult your nearest Sony dealer.

Three- or five-
digit code/	Cause/Remedy
Message
	The inserted MD is record-protected.
C11/Protected	, Take out the MD and close the record-
	protect slot.
	You tried to record a CD with a format
	that the external device connected to the
C12/Cannot Copy	deck does not support, such as CD-ROM
	or video CD.
	, Remove the disc and insert a music
	CD.
	The recording was not made properly.
	, Set the deck in a stable surface, and
	repeat the recording procedure.
C13/REC Error	The inserted MD is dirty (with smudges,
	fingerprints, etc.), scratched, or
	substandard in quality.
	, Replace the disc and repeat the
	recording procedure.
	The deck could not read the TOC on the
C13/Read Error	MD properly.
	, Take out the MD and insert it again.

Three- or five-
digit code/	Cause/Remedy
Message
	The deck could not read the TOC on the
	MD properly.
C14/Toc Error	, Insert another disc.
	, If possible, erase all the tracks on the
	MD .
	The sound source is a copy of
	commercially available music software, or
	you tried to record a CD-R (Recordable
C41/Cannot Copy	CD).
	, The Serial Copy Management System
	prevents making a digital copy.
	You cannot record a CD-R.
	The sporadic appearance of this message
	is caused by the digital signal being
	recorded. This will not affect the
	recording.
	While recording from a digital component
C71/Din Unlock	connected through the DIGITAL IN
	connector, the digital connecting cable
	was unplugged or the digital component
	turned off.
	, Connect the cable or turn the digital
	component back on.
E0001/	There is an error in the internal data that
	the deck needs in order to operate.
MEMORY NG
	, Consult your nearest Sony dealer.
	There is a problem with the optical
E0101/	pickup.
LASER NG	, The optical pick-up may have failed.
	Consult your nearest Sony dealer.

Procedure for using the Self-Diagnosis Function (Error History Display Mode).

Note: Perform the self-diagnosis function in the “error history display mode” in the test mode. The following describes the least required procedure. Be careful not to enter other modes by mistake. If you set other modes accidentally, press the MENU/NO button to exit the mode.

2