8 – Dubbing from CD to MD
The
Basic dubbing operation
First, load the CD to be used as the dubbing source into the CD deck, then insert a recordable MiniDisc into the MD deck.
To dub the entire CD
While the CD deck is stopped, press the DUBBING key on either the front panel or the remote control.
To dub a selected track on the CD
During playback of the desired track, or when that track is cued and the deck is in playback standby mode, press the DUBBING key on either the front panel or the remote control.
When the track is finished dubbing, both decks will stop.
NOTE
Dubbing is performed in the preset recording mode and recording speed. For details, refer to the following.
Recording mode setting
Using the “REC MODE?” option on the REC sub- menu of the MD menu, select the recording mode from the following choices.
ST: | standard stereo | default, with no |
| recording mode | display indication |
|
|
|
MONO | monaural record- | “MONO” lights |
| ing mode | up in the display |
|
|
|
LP2 | “LP2” lights up in | |
| recording mode | the display |
|
|
|
LP4 |
| “LP4” lights up in |
| reo recording | the display |
| mode |
|
|
|
|
NOTE
In MONO mode, only the left channel is recorded, and the recording time is twice that in ST mode.
The recording time in LP2 mode is twice that in ST mode.
The recording time in LP4 mode is four times that in ST mode.
The remaining MD recording time indicated depends upon the recording mode setting.
Recordings made in different recording modes can be combined on the same disc.
Since a special data compression technology is used for LP4 mode
Dubbing speed setting
Use the “REC SPEED?” option on the REC sub- menu of the MD menu to select either “NORMAL” or “HIGH” speed dubbing.
NORMAL: dubbing is performed during regular playback
HIGH: dubbing speed depends on the MD recording mode, as indicated below.
MD recording mode | source | dubbing speed |
| disc |
|
|
|
|
Standard mode | audio | 4X speed |
| CD |
|
|
|
|
34 TASCAM