Tascam MD-CD1 owner manual CD and MD Playback-Auto Ready, Repeat playback, To B repeat playback

Page 27

7 – CD and MD Playback—Auto Ready

Auto Cue function on and off for each deck. (Default position: OFF)

When the Auto Cue function is on, A_CUE is lit on the display.

Even when the power is turned off, the Auto Cue set- ting is maintained.

Setting the sound start position detection level

Use the “A_CUE LEVEL?” option on the PLAY sub- menu of the MD menu or CD menu to set the sound start position detection level. Settings can be made independently for each deck. The level can be set between –72 dB and –30 dB in 6 dB increments.

NOTE

When the Auto Cue point is being searched, the > arrow flashes in the display, and audio output is muted.

Auto Ready

When the Auto Ready function is on, after each track is played, playback standby mode is entered at the start of the next track. Even when the Skip function is used to skip tracks, playback standby mode is entered at the start of the selected track.

NOTE

When the Auto Cue function is also on, playback standby mode is entered at the start of the sound on the selected track, and not the beginning of that track.

Turning the Auto Ready function on and off

Press the AUTO READY key on the remote control to turn the function on and off.

You can also use the “A_READY?” option on the PLAY sub-menu of the MD menu or CD menu to turn the Auto Ready function on and off for each deck. (Default position: OFF)

When the Auto Ready function is on, A.READY is lit on the display.

Even when the power is turned off, the Auto Ready setting is maintained.

Repeat playback

Press the REPEAT key on the remote control to turn on the Repeat mode. In this mode, all the tracks on the disc are played continuously. During playback, if the Repeat mode is turned on, playback continues as before, and when the last track finishes, playback resumes from the first track. If Repeat mode is turned on when the deck is stopped, press the PLAY key to begin operation.

You can also use the “REPEAT?” option in the PLAY sub-menu of the MD and CD menus to turn the Repeat mode on and off for each deck.

Combining the Repeat mode with the Program, Sin- gle-track playback and Random playback functions will enable Program Repeat, Single-track Repeat and Random Repeat operations, respectively.

A to B repeat playback

If a specific portion between two points on the disc is specified, that portion can be played back repeatedly.

1During playback, press the A-B REPEAT key on the remote control at the beginning of the desired portion on the disc.

“A-” flashes on the display.

2At the end of the desired portion on the disc, press the A-B REPEAT key on the remote control again.

“REPEAT” and “A-B” are lit up on the dis-

play, and the desired A-B section will be played repeatedly.

To cancel A-B Repeat mode and resume nor- mal playback

Press the A-B REPEAT key once more.

In Random and Program modes, A-B Repeat cannot function when the specified A-B section spans more than one track.

When the STOP key is pressed, the specified A-B section is cancelled.

TASCAM MD-CD1Owner’s Manual 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents MD-CD1 HAZARD, do not Expose this Appliance to Rain or Moisture Important Safety Instructions Safety Information Table of Contents Supplied accessories IntroductionEnvironmental considerations Beware of condensation Some notes and precautionsIntroduction-Environmental considerations Rack-mounting the unitHandling of MiniDiscs About the User Table of Contents U-TOCInserting batteries Remote control unitSome notes and precautions BatteriesConnections Connecting analog audio equipmentConnecting digital audio equipment Power sourceFeatures and their functions Shared features Power switch Remote signal sensorFront panel CD Operation Features and their functions-Front panelMD Operation OPEN/CLOSE key Press this key toDisplay Features and their functions-DisplayRear Panel Features and their functions-Rear PanelFeatures and their functions-Remote Control Unit Remote Control UnitShared operation keys MD operation keys / CD operation keys Features and their functions-Remote Control Unit MD Operation Section CD Operation SectionFeatures and their functions-Remote Control Unit Display master and remote control master Selecting the remote control masterSelecting the display master Menu operation Menu configurationCD Menu Menu option Function Manual reference MD Menu Menu option Function Manual reference Menu operation-Menu configurationFront panel operation Remote control operationMenu operation-Operation basics Operation basicsBasic playback operation CD and MD PlaybackDiscs for playback Playback modesDisplay master and remote master settings CD and MD Playback-Display master and remote master setTrack selection Basic operation CD and MD Playback-Time Search functionTime Search function Auto cueTo B repeat playback CD and MD Playback-Auto ReadyAuto Ready Repeat playbackPitch control Timer PlaybackCD and MD Playback-Continuous CD and MD playback Continuous CD and MD playbackDeleting a programmed track CD and MD Playback-Single-track playbackSingle-track playback Program playbackSaving program data Time display switchingCD and MD Playback-Random playback Random playbackChanging the key of playback CD and MD Playback-End of disc/track warningEnd of disc/track warning Playback functions for CD onlyMP3 file directory playback Output volumeDirectory playback setting CD and MD Playback-MP3 file directory playbackCreating and deleting groups Group playback settingCD and MD Playback-MD group playback MD group playbackBasic dubbing operation Recording mode settingDubbing speed setting Dubbing from CD to MDMP3 Dubbing from CD to MD-Dubbing speed settingBasic recording MD recording from an external sourceAuto track function MD recording from an external source-Recording cautionsRecording cautions Adding track numbersMD recording from an external source-Fade-in and fade-out Fade-in and fade-out recordingTime Machine recording MD recording from an external source-Overwrite recording Overwrite recordingSync recording Checking remaining MD time MD recording from an external source-Checking remainingErase track MiniDisc editingEditing operations Undo an edit operationSelecting a track to be erased on the menu MiniDisc editing-Erase discErase disc Divide tracksMiniDisc editing-Combine tracks Combine tracksMove tracks Deleting a group Disc title when creating a groupMiniDisc editing-Creating a group Creating a groupTitle input Disc title inputTitle input operation Method Title input-Track title inputTrack title input Group title inputOther keyboard operations Using a computer keyboardKeyboard type setting Title input by keyboardCtrl + F9 Using a computer keyboard-Other keyboard operationsData settings / service data Data communication settingsViewing service data About finalization System limitationsCD section MD sectionTracks cannot be combined System limitations-MD sectionMessage Details / response Error MessagesMessage display glossary Operation messagesTroubleshooting Message display glossary-TroubleshootingMD specifications MD deckCD deck Rated input/outputSpecifications-Dimensional drawing Dimensional drawingUnit specifications MD-CD1
Top Page Image Contents