15 – Message display glossary—Troubleshooting
Troubleshooting
There is no power to the unit.
Please check that the power cord is properly plugged in.
“Disc Error!” is displayed.
The disc may be dirty. Please replace the disc.
Playback is not possible.
This may be due to condensation. In this case, remove the disc, turn the power on and wait a few hours, then try again.
No sound is output.
Confirm the connections with the audio system.
Check the volume level, and proper amplifier opera- tion.
Recording isn’t possible.
•The MD disc is set to write protect. Slide the tab on the cartridge to the closed position and try again.
•Confirm the connections with the audio system.
•Adjust the recording level.
•The disc may be for playback only. Please replace it with a recordable MD disc.
•Remaining recording time on the MD is insuffi- cient. Please delete unwanted tracks or replace the MD disc.
•Confirm amplifier operation.
Noise or static can be heard.
Please
The CD-MD1 does not retain settings.
While settings are retained each time they are made, in some cases they will not be retained when the power is turned off too soon. To prevent this from happening, do not turn off the power right after mak- ing a setting.
TASCAM