Tascam MD-CD1 Remote control unit, Some notes and precautions, Batteries, Inserting batteries

Page 9

2 – Remote control unit

Some notes and precautions

•When the remote control will not be used for an extended period of time, please remove the batter- ies to prevent the possibility of battery acid leakage which could damage the unit. Should leakage occur, remove and discard the batteries, and wipe the battery case thoroughly with a cloth. Avoid get- ting the battery liquid on the skin. After cleaning, replace with new batteries.

•The remote control functions by using an infrared light signal. When using the unit to control the MD-CD1, other devices that are turned on could be operated by its signal.

•If the range of remote operation becomes smaller, or commands do not always function properly, the batteries have become weak and should be replaced. Always replace both batteries with new batteries of the same type.

•Point the remote control to the remote sensor on the main unit.

Do not obstruct the path between the remote con- trol and the remote sensor.

7m

Batteries

If batteries are used improperly, or if leakage or breakage occurs, the unit will not function. Please observe the cautions indicated on the batteries and their packaging to ensure proper usage.

•Conﬁrm + and – polarity and follow the indications when inserting new batteries into the remote con- trol.

•Do not use old and new batteries together.

•Even if the battery is the same size, the voltage may differ. Do not use batteries of different speciﬁ- cations together.

•Do not attempt to recharge batteries that are non- rechargeable.

•Do not open or disassemble batteries, throw them into a ﬁre or put them in water.

Inserting batteries

1.Open the lid.

2.Conﬁrm +/- polarity, and insert two AA bat- teries.

3.Close the lid.

TASCAM MD-CD1Owner’s Manual 9

Image 9

Contents MD-CD1 HAZARD, do not Expose this Appliance to Rain or Moisture Important Safety Instructions Safety Information Table of Contents Supplied accessories IntroductionEnvironmental considerations Introduction-Environmental considerations Some notes and precautionsRack-mounting the unit Beware of condensationHandling of MiniDiscs About the User Table of Contents U-TOCSome notes and precautions Remote control unitBatteries Inserting batteriesConnecting digital audio equipment Connecting analog audio equipmentPower source ConnectionsFeatures and their functions Shared features Power switch Remote signal sensorFront panel CD Operation Features and their functions-Front panelMD Operation OPEN/CLOSE key Press this key toDisplay Features and their functions-DisplayRear Panel Features and their functions-Rear PanelFeatures and their functions-Remote Control Unit Remote Control UnitShared operation keys MD operation keys / CD operation keys Features and their functions-Remote Control Unit MD Operation Section CD Operation SectionFeatures and their functions-Remote Control Unit Display master and remote control master Selecting the remote control masterSelecting the display master Menu operation Menu conﬁgurationCD Menu Menu option Function Manual reference MD Menu Menu option Function Manual reference Menu operation-Menu configurationMenu operation-Operation basics Remote control operationOperation basics Front panel operationDiscs for playback CD and MD PlaybackPlayback modes Basic playback operationDisplay master and remote master settings CD and MD Playback-Display master and remote master setTrack selection Time Search function CD and MD Playback-Time Search functionAuto cue Basic operationAuto Ready CD and MD Playback-Auto ReadyRepeat playback To B repeat playbackCD and MD Playback-Continuous CD and MD playback Timer PlaybackContinuous CD and MD playback Pitch controlSingle-track playback CD and MD Playback-Single-track playbackProgram playback Deleting a programmed trackCD and MD Playback-Random playback Time display switchingRandom playback Saving program dataEnd of disc/track warning CD and MD Playback-End of disc/track warningPlayback functions for CD only Changing the key of playbackDirectory playback setting Output volumeCD and MD Playback-MP3 file directory playback MP3 ﬁle directory playbackCD and MD Playback-MD group playback Group playback settingMD group playback Creating and deleting groupsDubbing speed setting Recording mode settingDubbing from CD to MD Basic dubbing operationMP3 Dubbing from CD to MD-Dubbing speed settingBasic recording MD recording from an external sourceRecording cautions MD recording from an external source-Recording cautionsAdding track numbers Auto track functionMD recording from an external source-Fade-in and fade-out Fade-in and fade-out recordingTime Machine recording MD recording from an external source-Overwrite recording Overwrite recordingSync recording Checking remaining MD time MD recording from an external source-Checking remainingEditing operations MiniDisc editingUndo an edit operation Erase trackErase disc MiniDisc editing-Erase discDivide tracks Selecting a track to be erased on the menuMiniDisc editing-Combine tracks Combine tracksMove tracks MiniDisc editing-Creating a group Disc title when creating a groupCreating a group Deleting a groupTitle input Disc title inputTitle input operation Track title input Title input-Track title inputGroup title input MethodKeyboard type setting Using a computer keyboardTitle input by keyboard Other keyboard operationsCtrl + F9 Using a computer keyboard-Other keyboard operationsData settings / service data Data communication settingsViewing service data CD section System limitationsMD section About ﬁnalizationTracks cannot be combined System limitations-MD sectionMessage display glossary Error MessagesOperation messages Message Details / responseTroubleshooting Message display glossary-TroubleshootingCD deck MD deckRated input/output MD speciﬁcationsSpecifications-Dimensional drawing Dimensional drawingUnit speciﬁcations MD-CD1