Tascam MD-CD1 MiniDisc editing, Editing operations, Undo an edit operation, Erase track

10 – MiniDisc editing

Tracks recorded can be deleted, moved, divided or combined by MiniDisc editing operation.

Editing operations

All MD editing functions are operated from the EDIT sub-menu on the MD menu.

After selecting a menu option on the EDIT sub- menu, subsequent operation will vary. Specific oper- ations for each menu option are explained individu- ally in the following section.

NOTE

Editing functions cannot be performed on discs set to prevent accidental erasure (write protected), and “W_Protected!” will be displayed when accessing the EDIT sub-menu of the MD menu.

selected, and “Can’t Edit!” will be displayed. These are options for editing functions to be performed on tracks or points, including DIVIDE, COMBINE and MOVE. The ERASE TRK option is called up before the track has been selected.

Canceling edits

To cancel editing operations up to the point where the setting screen or confirmation screen (“Sure?”) appears, press the NO key, the MD STOP key, or the MD MENU key (MENU key on the remote control).

NOTE

Tracks and points for editing

For most editing menu options, if the deck is not in play or in playback standby mode at the track or point to be edited, the option itself cannot be

After editing operations have been completed, with the MD still inserted and “TOC” lit up on the display, if the power is turned off, the revised U-TOC will not be writ- ten on the disc, and the editing operation will not be retained on the disc.

UNDO an edit operation

It is possible to cancel the most recently performed editing operation.

1Stop the MD deck.

2Select the “UNDO?” option from the EDIT sub-menu. Undo> *** is displayed, with ***

representing the last performed editing option.

3Press the ENTER key (or the YES key) on the front panel, or the ENT/YES key on the remote control.

“Sure?” is displayed.

4Press the ENTER key (or the YES key) on the front panel, or the ENT/YES key on the remote control.

The last editing operation performed will be undone.

Erase track

Unwanted tracks can be erased one at a time	Selecting a track to be erased by playback
Example: To erase B in track number 2	1	1. The deck should be in play or in playback
		standby on the track to be erased.
	2	Select the “ERASE TRK?” option on the
		EDIT sub-menu of the MD menu.
		“Sure?” is displayed.
	3	Press the ENTER key (or the YES key) on
		the front panel, or the ENT/YES key on the
		remote control.
		After the track is erased, “Complete” is
		shown on the display.

TASCAM MD-CD1Owner’s Manual 41