EarthQuake MODEL 3365PS, R3355H Controls, Drive Safety Control Lever, Belt Tension Adjustment

Page 9

OPERATor INSTRUCTIONS and parts

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

controls

Drive SAFETY Control Lever

Engages tines into forward; releasing returns machine to neutral.

Pulling down on the drive safety control lever engages the tines. Releasing the drive safety control lever disengages the tines to a neutral position.

BELT TENSION ADJUSTMENT

Proper belt tension is critical to good performance. After 30 minutes of operation, all cables may have to be adjusted due to initial stretch. Thereafter, check tension after every two hours of operation.

To increase belt tension:

1.Loosen upper jam nut. Turn nut up cable in 1/8” increments.

2.Tighten lower jam nut.

3.Check adjustment.

This procedure can be repeated until conduit adjustment bolts have no more adjustment left. If no more adjustment can be made, belt may have to be replaced.

DEPTH REGULATOR LEVER

Tilling depth is controlled by the height of the depth regulator lever.

To adjust tilling depth:

1.Remove detent pin.

2.Raise the depth regulator lever to position tines at chosen tilling depth.

3.Align hole in depth regulator lever with hole in depth regulator bracket and replace detent pin.

!CAUTION

This information is provided here only to introduce the controls. DO NOT START THE ENGINE ATTHISTIME. Starting and operating instructions are given on page 10. Please read this section and all operating and safety instructions before startingyour tiller.

•As a safety precaution,the drive safety control lever will not lock in the forward position.

•To stop the wheels and tines at any time, release the drive safety control lever.

!WARNING

ENGINE SHOULD BE OFF BEFORE ADJUSTING ANY CONTROLS.

Do not adjust tilling depth unless drive safety control lever is released to the neutral position.

drive safety control lever disengaged

1/4” stretch

upper jam nut

lower jam nut

forward cable

Model 3365/3365B/3365K/3365CE Handlebar

800-345-6007

drive safety control lever disengaged

1/4” stretch

upper jam nut

lower jam nut

forward cable

Model 3365PS/3365KPS/R3365H/3365PSCE

Handlebar

Page 

GetEarthquake.com

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Page Introduction ContentsOWNER’S Responsibility Important Safety PrecautionsSpecial Messages PreparationOperation Maintenance and storageTines DANGER/OPERATION Safety DecalsHood Warning LBLCENOISE80Do not TRY to Lift the Rototiller from the Carton Unpacking and AssemblyTransport Position Operating Position Features 3365/3365B/3365Ce/3365KBelt Tension Adjustment Drive Safety Control LeverEngine should be OFF Before Adjusting ANY Controls ControlsPRE-START Inspection OperationSTART-UP YOU Must ADD Engine OIL Before Starting EngineOperating Speed For models R3365H and 3365PSCE onlyShutting Down TillingMaintenance Schedule Maintenance Operation Before Hours orServicing the Rototiller Belt replacement Check Belt TensionChange Forward Belt Clean tine axle shaft Engine MaintenanceCheck or Fill Engine Crankcase LubricationPrepare for Storage StorageTroubleshooting Guide Troubleshooting and RepairDescription QTY 3365/3365B/3365ce/3365K Handlebar parts3365PS/3365KPS Handlebar parts R3355H/3365PSCE Handlebar parts 3365KPS Bumper Model 3365PS/3365PSCE Bumper Guard Parts SHIELD, DirtModel R3355H Bumper R3355H motor mount & Hood partsModel R3355H Bumper Guard Parts NUT, Nyloc 1/4 Tines & transmission PartsFront Tine Rototillers Year Limited Warranty Terms and ConditionsOPERATor Instructions and parts OPERATor Instructions and parts Benefit you throughout the year

MODEL 3365CE, 3365, 3365B, 3365PSCE, MODEL 3365KPS specifications

The EarthQuake MODEL 3365KPS, 3365PSCE, 3365, MODEL 3365CE, and MODEL 3365PS represent a line of robust and powerful tools designed to meet various construction and landscaping needs. These models are engineered to provide exceptional performance in the most challenging conditions, making them a favorite among professionals and DIY enthusiasts alike.

A standout feature of these models is their heavy-duty construction. Built with high-quality materials, the EarthQuake 3365 series ensures durability and longevity, capable of withstanding the rigors of daily use. They are particularly known for their efficient combustion engines that deliver robust power while maintaining fuel efficiency, allowing users to operate for extended periods without frequent refueling.

One of the key technologies incorporated into the EarthQuake 3365 models is their precision-engineered vibration reduction system. This innovation minimizes operator fatigue during prolonged use, enhancing comfort and productivity on the job. Additionally, the models are equipped with an easy-start mechanism that simplifies ignition, ensuring a hassle-free start every time.

The EarthQuake 3365 series also features adjustable settings that provide versatility for various applications. Whether for digging, tamping, or breaking concrete, these tools can adapt to specific tasks efficiently. The pneumatic wheels on the models enhance mobility, making it easy to maneuver them across different terrains, including rough and uneven surfaces.

Another characteristic that sets the EarthQuake 3365 line apart is its user-centric design. Each model is equipped with ergonomic handles that promote a comfortable grip, allowing for better control and precision during operation. Safety features, such as automatic shut-off mechanisms and protective guards, are also integrated to ensure that users can operate the tools confidently and with reduced risk of accidents.

In summary, the EarthQuake MODEL 3365KPS, 3365PSCE, 3365, MODEL 3365CE, and MODEL 3365PS represent the pinnacle of engineering in construction tools. With their powerful engines, durable construction, user-friendly features, and advanced technologies, these models are ideal for both commercial and residential applications, offering reliable performance and unmatched efficiency for all your tough jobs.
Top Page Image Contents