Viper 5500 manual Starter Anti-Grind Circuitry

the timer mode will cancel.

1.Press Timer mode buttons.

2.The vehicle will confirm with 4 parking light flashes.

3.A 1-second delay will start.

4.The system will start the car and will run for the specified

duration, unless shut down by the remote start button .

If shut down with the remote start button the system will remain in timer mode.

5.The system will start every 3 hours until canceled by the

brake, hood, or neutral safety shut-down wires.

IMPORTANT! Timer Mode should be used only in open areas. Never start and run the vehicle in an enclosed space such as a garage or carport.

To exit timer mode, turn the ignition switch on any time the engine is running. The parking lights will flash 4 times, indicating timer mode has been exited.

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind cir- cuitry prevents the starter from engaging, even if the key is turned to the start position. This prevents damage to the starter motor if the key is turned to the start position during remote start operation.

NOTE: Anti-grind circuitry only works when the remote start system is operating the motor and the Failsafe® Starter Kill relay is installed.

26 © 2006 Directed Electronics—all rights reserved