Viper 5500 manual Programming Options

Programming Options

Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require additional installation labor. This system's programming options are listed below, with the factory default settings in bold:

■12, 24, or 60 minute run time. your system can be pro- grammed to allow the vehicle to run for 12, 24, or 60 min- utes when remote started. Can be set up to minute incre- ments by your installer.

■3, 6, 9, or 12 minute timer mode run time. Your system can be programmed to allow the vehicle to run for 3, 6, 9, or 12 minutes when remote started in timer mode. Can be set up to 16 minutes by your installer.

■Comfort closure is a programming option which closes the vehicle’s windows after remote locking.

■Parking lights flashing or constant. Your system can be pro- grammed to either flash or to turn on the parking lights con- stantly during the entire remote start operation.

■Passive Mode or Active Mode. In Passive Mode the Failsafe® Starter Kill will automatically activate 30 seconds after the ignition has been turned off.

■Ignition switch-controlled door-locking on or off. With this feature on, the doors will lock 3 seconds after the ignition key is turned on, and unlock when the ignition key is turned off.

28 © 2006 Directed Electronics—all rights reserved