Tascam MD-801R/P Mk II, MD-801P Mk II 10Erasing a complete disc, 11Track and disc title entry

Page 39

3Turn the SHUTTLE wheel clockwise. The dis- play changes:

Track OK ?

4Turn the SHUTTLE wheel clockwise once again to change the current track from mono to stereo or vice versa.

The display will show Now Editing, followed by Complete.

This function may also be used to “un-protect” a track if the following message appears at any time in the edit mode:

T _ Protected!

This signifies that the track cannot be edited. This is software protection, which has been set by an MD unit other than an MD-801, and it can be disabled using this function in the way described above.

NOTE

If a track is “unprotected” in this way, it cannot be protected again.

5.10Erasing a complete disc

As well as erasing individual tracks (see 5.3, "Eras- ing a track"), it is also possible to erase the entire contents of a disc.

1After pressing the EDIT key, turn the DATA dial until the display shows:

ERASE DISC ?

2Turn the SHUTTLE wheel clockwise to enter this edit menu:

Sure ?

3If you are sure that you want to erase the con- tents of the disc, turn the SHUTTLE wheel clockwise once more.

The display will show Now Editing, followed by Complete, followed by

Blank Disc.

If you want to abort the erase process, use the usual methods (SHUTTLE wheel counter- clockwise, EDIT key or STOP key).

5 - Erasing a complete disc

5.11Track and disc title entry

The disc and tracks can be titled. The titles can con- sist of upper- and lowercase letters, numbers, and punctuation symbols (as well as Japanese katakana ).

Each title can be up to 99 characters long, and titles too long to fit on the display are scrolled.

The total number of characters which can be included as titles on a disc (disc and track titles) is 1,792 characters.

A computer keyboard (PS/2 compatible) can be attached to the MD-801, and used to input titles, or titles can be entered, using the procedure described below (for keyboard operations, see 6, "Use of a key- board with the MD-801").

Titles can be entered in stop (disc titles), play or play ready (track titles) mode as well as in the record and record ready modes.

1Press the EDIT key and turn the DATA dial until the display shows:

TITLE ?

2Turn the SHUTTLE wheel clockwise.

If the MD-801 is in stop mode, the words DISC TITLE will light in the display, and you can enter the title for the whole disc.

If the MD-801 is in play or play ready mode, or record or record ready mode, the words TRACK TITLE will light in the display, and you can enter the title for the current track.

3The display will change:

_

The underline cursor shows where the character will be entered.

4Use the DATA dial to scroll through the symbol set. The character set selected initially is the lowercase alphabet set, together with numbers and punctuation symbols.

5Use the MEMO IN/CAPS key [23] to change between lowercase and uppercase characters. If uppercase characters are selected, the CAPS indicator will light in the display.

6Turn the SHUTTLE wheel clockwise to move the cursor to the right, and counterclockwise to move it to the left. Continuing to hold the SHUTTLE wheel away from the center posi-

TASCAM MD-801R/P Mk II 5–7

Page 38 Page 40
Image 39
Page 38 Page 40
Contents MD-801R@#/ MD-801P@# Important for U.K. Customers Important Safety PrecautionsImportant Safety Instructions Safety Information Table of Contents Use of a keyboard with the MD-801 Remote control of the MD-801Specifications, etc Editing operationsAbout the MiniDisc format IntroductionTrack titling, etc Care of MD mediaCare of MD media About the MD-801R/P MkCare of the unit About the MD-801R/P MkUnpacking the unit Rack-mounting the unitBackup memory About this manualAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key Play Mode key TOC Write key and indicatorAuto Ready key and indicator Auto CUE key and indicatorDisplay DisplayRear panel Rear panelAnalog output function DIP switch bank Analog Inputs and trimmers BalancedAnalog Outputs Line and trimmers Remote Control connector Mode SET DIP switch bankKeyboard connector Remote Serial connectorJog loop length Menu itemsBasic principles of menu operations Auto cue Frame displayEOM track Resume settingResume setting Timer-controlled playback12Check items Incremental play10Incremental play 11Serial communications15Post-script recording Auto track numbering level13Auto track numbering level 14Copy IDBasic operations Inserting and ejecting discsPlayback of discs Playback of discs 10Track search operations 13Varispeed mode14Jog mode Repeat playbackRecording operations Recording operationsGeneral notes on recording using the MD format Rebuilding the TOCBasic recording Track number incrementing Post-Script recordingReplace recording Digital recording Sound synchro recording10Track title copying together with audio Analog recordingDividing tracks Cancelling an edit operationEditing operations Basic editing operationsErasing a track Erasing a trackCombining tracks Moving tracks Moving tracksB point erase operations Normal A-B erase B point erase operationsErasing to the end of a track Erasing from the start of a trackMoving an A-B point Moving an A-B pointRestoring erased material Restoring erased materialChanging track attributes Erasing a complete disc 10Erasing a complete disc11Track and disc title entry Track and disc title entry 11.6Copying disc and track titles Tally indicators Remote control of the MD-801Remote Parallel connector Fader startSequential playback and recording Error messages and troubleshooting guide Specifications, etcSpecifications SpecificationsGeneral MiniDisc General and electrical Analog I/ODigital I/O Other connectionsRC-8 Remote Control Unit Dimensional drawingDimensional drawing Option RC-801 Remote Control UnitAES/EBU Digital Input Index a EEOM Index F PSync IN, Word Sync THRU, Word Index R TIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.
Top Page Image Contents