Tascam MD-801P Mk II, MD-801R/P Mk II owner manual Recording operations

Page 28

4 - Recording operations

NOTE

The point at which the JOG key was pressed will not be included in the jog loop. To include this point in the loop, you must turn the JOG dial counterclockwise.

4.2.15Shuttle mode

by the time (e.g. 10h 34m 12s) in 24- hour format.

If the track has not been time-stamped, the display briefly shows:

No Date

NOTE

The SHUTTLE wheel [13] allows you to perform fast cue or review operations, moving forwards or backwards through the program material at high speed.

The further the wheel is moved from the central posi- tion, the faster the cue or review speed.

Since the MD-801 is a digital recorder, playback in cue and review is not continuous.

4.2.16Displaying track titles during playback

When the MD-801 is in play or play ready (or in record or record ready) mode, pressing the TITLE key [16] shows the current track title.

If the track does not have a title entered, the display briefly shows:

No Title

If the display is too long to fit on the display, it can be scrolled by pressing the TITLE key once more.

NOTE

If the MD-801 is in stop mode, pressing the TITLE key displays the disc, rather than the current track, title. Remember also that the MEMO IN/CAPS key can also be used to affect the display (see [16]).

The entry and editing of titles is described in 5.11, "Track and disc title entry"

4.2.17Displaying the recording date

If the current track has been “date- and time- stamped”, the date and time can be displayed:

1While the MD-801 is in play or play ready (or record or record ready) mode, press the MEMO IN/CAPS key [23] so that the indicator is lit.

2Press the TITLE key [16]. The word DAT E will light in the display, and the date will be shown (for example 98y 12m 25d), followed

If the MD-801 is in stop mode, this operation shows the disc’s time and date, rather than those of the current track.

4.2.18Setting the time and date

Since the MD-801 leaves TASCAM with the date and time pre-set, there should be little need for you to set the time and date of the internal clock.

However, if you move the MD-801 across time- zones, etc., you may need to reset the date and time following the procedure below:

1Eject any disc and power off the MD-801 (this step is not strictly necessary, but simplifies the procedure).

2Press and hold down the TIME key [17] while turning on the power. The display shows:

CLOCK SET ?

3Turn the SHUTTLE wheel clockwise to start setting the time and date.

__ y __ m __ d

4Use the DATA dial as a data entry wheel, and the SHUTTLE wheel as a cursor to move between the year (y), month (m) and day (d) fields, as described in 3.1, "Basic principles of menu operations".

5After entering the value for the day, turn the

SHUTTLE wheel:

__ h __ m -- s

6You can set the hours (h) and minutes (m) here.

7When these have been entered, press the TIME key to set the time (the seconds value is set to zero as you press the key) and return to normal operation.

R 4.3 Recording operations

Naturally, these recording operations refer to the

4–4TASCAM MD-801R/P Mk II

Page 27 Page 29
Image 28
Page 27 Page 29
Contents MD-801R@#/ MD-801P@# Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Remote control of the MD-801 Specifications, etcEditing operations Use of a keyboard with the MD-801Introduction About the MiniDisc formatCare of MD media Care of MD mediaAbout the MD-801R/P Mk Track titling, etcAbout the MD-801R/P Mk Unpacking the unitRack-mounting the unit Care of the unitAbout this manual Backup memoryAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key TOC Write key and indicator Auto Ready key and indicatorAuto CUE key and indicator Play Mode keyDisplay DisplayRear panel Rear panelAnalog Inputs and trimmers Balanced Analog output function DIP switch bankAnalog Outputs Line and trimmers Mode SET DIP switch bank Keyboard connectorRemote Serial connector Remote Control connectorMenu items Basic principles of menu operations Auto cueFrame display Jog loop lengthResume setting Resume settingTimer-controlled playback EOM trackIncremental play 10Incremental play11Serial communications 12Check itemsAuto track numbering level 13Auto track numbering level14Copy ID 15Post-script recordingInserting and ejecting discs Basic operationsPlayback of discs Playback of discs 13Varispeed mode 14Jog modeRepeat playback 10Track search operationsRecording operations Recording operationsRebuilding the TOC General notes on recording using the MD formatBasic recording Post-Script recording Track number incrementingReplace recording Sound synchro recording Digital recordingAnalog recording 10Track title copying together with audioCancelling an edit operation Editing operationsBasic editing operations Dividing tracksErasing a track Erasing a trackCombining tracks Moving tracks Moving tracksB point erase operations B point erase operations Erasing to the end of a trackErasing from the start of a track Normal A-B eraseMoving an A-B point Moving an A-B pointRestoring erased material Restoring erased materialChanging track attributes 10Erasing a complete disc Erasing a complete disc11Track and disc title entry Track and disc title entry 11.6Copying disc and track titles Remote control of the MD-801 Tally indicatorsFader start Remote Parallel connectorSequential playback and recording Specifications, etc Error messages and troubleshooting guideSpecifications SpecificationsGeneral MiniDisc Analog I/O Digital I/OOther connections General and electricalDimensional drawing Dimensional drawing OptionRC-801 Remote Control Unit RC-8 Remote Control UnitIndex a E AES/EBU Digital InputIndex F P EOMIndex R T Sync IN, Word Sync THRU, WordIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.
Top Page Image Contents