Tascam MD-801R/P Mk II Basic operations, Inserting and ejecting discs, Playback of discs

Page 25

This section gives you informstion about the basic operations using the MD-801.

It assumes that you have connected the MD-801 to all the other equipment that you will be using. If you have not already made these connections, read 2.3, "Rear panel" for details of the rear panel connections, and connect the other equipment appropriately.

4.1 Inserting and ejecting discs

Discs are inserted label side uppermost, in the direc- tion of the arrow marked on the disc. The display shows:

NO DISC

if the MD-801 is turned on without a disc in the drive.

As the disc is loaded, the display shows:

Disc Loading

When the disc has been loaded, the disc title, number of tracks, total running time, etc. are displayed.

Use the EJECT key [3] to eject discs.

Discs do not have to be ejected when the power to the MD-801 is turned off. No damage will be caused to discs if they are left in the unit at power-off or power on.

NOTE

Never turn the power off when the U-TOC is being written to disc (UTOC Writing). If you do, the disc may become unreadable.

When the MD-801 is turned on with a disc already loaded in the drive, the display will show:

TOC Reading

before showing the disc title, running time, number of tracks, etc.

4.2 Playback of discs

The following instructions apply to both pre- recorded and recordable MD media.

4.2.1 Playing back a whole disc

When the disc has been loaded, and the TOC has been read, use the PLAY MODE key so that the playback mode is not set to S I N G L E or A - B (see [22]).

4 - Basic operations

Press the PLAY key [6]. Playback will start from the beginning of the disc.

Stop playback with the STOP key [5].

Pause playback with the READY key [7] and restart it with the PLAY key.

NOTE

If the tracks being played back are less than three seconds in length, playback will be dis- continuous (“jumpy”).

4.2.2 Playback outputs

There are two sets of outputs provided on the MD-

801:the LINE balanced XLR-type at +4 dBu [40], and the MONITOR unbalanced RCA at –10 dBV

[38].

OUTPUT MODE DIP switch 2 [39] on the rear panel is used to synchronize these outputs so that material is always played back through both sets of outputs (off), or individually (on).

If the individual output option is chosen, the PLAY key on the MD-801 itself or the MONITOR key on the RC-801 will start playback through the MONITOR outputs only. In this case, the LINE out- puts are activated following a play or online com- mand from a remote controller (keyboard, RC-801, RC-8 or the serial or parallel controller).

If the the LINE outputs are used for playback, the MONITOR outputs may also be used for simulta- neous playback. OUTPUT MODE DIP switch 3 controls this. When set to off, the MONITOR out- puts are muted when the LINE outputs are in use. When set on, the MONITOR outputs are always used.

The PHONES jack [9] is always used.

The above applies to the analog outputs only, and does not refer at all to the digital outputs, which are always in use, regardless of the origin of the play- back command.

4.2.3 Monaural playback

OUTPUT MODE DIP switch 1 [39] is used to com- bine the left and right tracks and output them from both the left and right outputs equally.

The outputs affected are the LINE [40], MONITOR

[38]and PHONES outputs. The digital outputs are not affected by the position of this switch.

TASCAM MD-801R/P Mk II 4–1

Image 25
Contents MD-801R@#/ MD-801P@# Important for U.K. Customers Important Safety PrecautionsImportant Safety Instructions Safety Information Table of Contents Specifications, etc Remote control of the MD-801Editing operations Use of a keyboard with the MD-801About the MiniDisc format IntroductionCare of MD media Care of MD mediaAbout the MD-801R/P Mk Track titling, etcUnpacking the unit About the MD-801R/P MkRack-mounting the unit Care of the unitAbout this manual Backup memoryAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key Auto Ready key and indicator TOC Write key and indicatorAuto CUE key and indicator Play Mode keyDisplay DisplayRear panel Rear panelAnalog Inputs and trimmers Balanced Analog output function DIP switch bankAnalog Outputs Line and trimmers Keyboard connector Mode SET DIP switch bankRemote Serial connector Remote Control connectorBasic principles of menu operations Auto cue Menu itemsFrame display Jog loop lengthResume setting Resume settingTimer-controlled playback EOM track10Incremental play Incremental play11Serial communications 12Check items13Auto track numbering level Auto track numbering level14Copy ID 15Post-script recordingInserting and ejecting discs Basic operationsPlayback of discs Playback of discs 14Jog mode 13Varispeed modeRepeat playback 10Track search operationsRecording operations Recording operationsRebuilding the TOC General notes on recording using the MD formatBasic recording Post-Script recording Track number incrementingReplace recording Digital recording Sound synchro recording10Track title copying together with audio Analog recordingEditing operations Cancelling an edit operationBasic editing operations Dividing tracksErasing a track Erasing a trackCombining tracks Moving tracks Moving tracksB point erase operations Erasing to the end of a track B point erase operationsErasing from the start of a track Normal A-B eraseMoving an A-B point Moving an A-B pointRestoring erased material Restoring erased materialChanging track attributes 10Erasing a complete disc Erasing a complete disc11Track and disc title entry Track and disc title entry 11.6Copying disc and track titles Tally indicators Remote control of the MD-801Fader start Remote Parallel connectorSequential playback and recording Error messages and troubleshooting guide Specifications, etcSpecifications SpecificationsGeneral MiniDisc Digital I/O Analog I/OOther connections General and electricalDimensional drawing Option Dimensional drawingRC-801 Remote Control Unit RC-8 Remote Control UnitAES/EBU Digital Input Index a EEOM Index F PSync IN, Word Sync THRU, Word Index R TIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.