Tascam MD-801P Mk II, MD-801R/P Mk II Important Safety Precautions, Important for U.K. Customers

Page 2

Important Safety Precautions

IMPORTANT (for U.K. Customers)

DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid

a possible shock hazard by inadvertent connection to the mains supply.

If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below:

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : EARTH

BLUE

: NEUTRAL

BROWN

: LIVE

WARNING: This apparatus must be earthed.

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol • or coloured GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover.

IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN.

TO THE USER

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residental area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user’s authority to operate this equipment.

For the consumers in Europe

WARNING

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Pour les utilisateurs en Europe

AVERTISSEMENT

Il s’agit d’un produit de Classe A. Dans un environnement domestique, cet appareil peut provoquer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre des mesures appropriées.

Für Kunden in Europa

Warnung

Dies is eine Einrichtung, welche die Funk-Entstörung nach Klasse A besitzt. Diese Einrichtung kann im Wohnbereich Funkstörungen versursachen ; in diesem Fall kann vom Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

2 –– TASCAM MD-801R/P Mk II

Page 1 Page 3
Image 2
Page 1 Page 3
Contents MD-801R@#/ MD-801P@# Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Editing operations Remote control of the MD-801Specifications, etc Use of a keyboard with the MD-801Introduction About the MiniDisc formatAbout the MD-801R/P Mk Care of MD mediaCare of MD media Track titling, etcRack-mounting the unit About the MD-801R/P MkUnpacking the unit Care of the unitAbout this manual Backup memoryAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key Auto CUE key and indicator TOC Write key and indicatorAuto Ready key and indicator Play Mode keyDisplay DisplayRear panel Rear panelAnalog Outputs Line and trimmers Analog output function DIP switch bankAnalog Inputs and trimmers Balanced Remote Serial connector Mode SET DIP switch bankKeyboard connector Remote Control connectorFrame display Menu itemsBasic principles of menu operations Auto cue Jog loop lengthTimer-controlled playback Resume settingResume setting EOM track11Serial communications Incremental play10Incremental play 12Check items14Copy ID Auto track numbering level13Auto track numbering level 15Post-script recordingPlayback of discs Basic operationsInserting and ejecting discs Playback of discs Repeat playback 13Varispeed mode14Jog mode 10Track search operationsRecording operations Recording operationsBasic recording General notes on recording using the MD formatRebuilding the TOC Replace recording Track number incrementingPost-Script recording Sound synchro recording Digital recordingAnalog recording 10Track title copying together with audioBasic editing operations Cancelling an edit operationEditing operations Dividing tracksCombining tracks Erasing a trackErasing a track B point erase operations Moving tracksMoving tracks Erasing from the start of a track B point erase operationsErasing to the end of a track Normal A-B eraseMoving an A-B point Moving an A-B pointChanging track attributes Restoring erased materialRestoring erased material 11Track and disc title entry Erasing a complete disc10Erasing a complete disc Track and disc title entry 11.6Copying disc and track titles Remote control of the MD-801 Tally indicatorsSequential playback and recording Remote Parallel connectorFader start Specifications, etc Error messages and troubleshooting guideGeneral MiniDisc SpecificationsSpecifications Other connections Analog I/ODigital I/O General and electricalRC-801 Remote Control Unit Dimensional drawingDimensional drawing Option RC-8 Remote Control UnitIndex a E AES/EBU Digital InputIndex F P EOMIndex R T Sync IN, Word Sync THRU, WordIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.
Top Page Image Contents