Tascam MD-801P Mk II owner manual Resume setting, EOM track, EOM disc, Timer-controlled playback

Page 22

3 - Resume setting

The minimum length for the jog loop is 12 frames,

 

 

 

 

 

 

R

 

 

 

 

and the maximum value is 32 frames. The value is set

 

 

 

NOTE

in 1-frame steps.

 

 

 

The EOM tally signal is always transmitted

 

 

 

 

 

 

 

 

 

when the U-TOC is updated as the result of a

3.6 Resume setting

 

recording operation having been completed,

 

 

 

 

 

 

 

unless this setting is set to off. It is also trans-

 

 

 

 

 

 

 

 

 

 

 

 

 

mitted when recording is halted temporarily.

 

RESUME SEL ?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the resume setting is turned on, playback

 

 

 

 

 

 

 

 

3.8 EOM track

restarts from the point at which it was stopped (or the

point at which playback was taking place when the

 

 

 

 

 

 

 

 

power was cut off). The default is off, which means

 

 

 

 

 

 

EOM TRACK ?

 

that when playback is stopped, it will start at the

 

 

 

 

 

 

 

The EOM track is similar to the EOM disc function,

beginning of the disc, unless a track number is

explicitly specified.

as described above. The EOM tally signal is trans-

This function, when on, changes the function of the

mitted before the end of a track playback, and this

menu allows the time before the end to be set, or the

STOP key [5]. When the resume function is on, and

disabling of this function (default off).

the STOP key is pressed in play mode, the MD-801

 

 

 

 

enters play ready mode. If the STOP key is pressed

When this message is transmitted, the E O M indicator

once again, the MD-801 enters stop mode.

flashes in the display.

After the menu has been opened with the SHUTTLE

After the menu has been opened with the SHUTTLE

wheel, the display changes:

wheel, the display changes:

RESUME> OFF

The options available are on and off.

EOM TRK> OFF

The time may be set from 1 to 99 seconds, in 1 sec- ond steps, or set to off.

3.7 EOM disc

EOM DISC ?

This menu item affects the output of the MD-801 to a device attached to the parallel port (see 7.1, "REMOTE (PARALLEL) connector". When set on, an “EOM DISC” tally signal is transmitted from the parallel port when the end of the disc is reached in playback (or recording, in the case of the MD-801R).

When this message is transmitted, the E O M indicator flashes in the display.

In this menu, it is possible to select how many sec- onds before the end of the disc this message is to be sent, or to turn the message off completely. The default setting is off.

After the menu has been opened with the SHUTTLE wheel, the display changes:

EOM DISC>OFF

The time may be set from 1 to 99 seconds, in 1 sec- ond steps, or set to off.

3.9 Timer-controlled playback

TIMER PLAY ?

When this function is enabled, if a disc is in the unit, and the unit is powered up (e.g. from a timer-based switching unit), the TOC is read, and playback starts. The default setting is off.

If the resume function is switched on (3.6, "Resume setting") playback will start from the point at which playback was last stopped, or at the playback point at which the power was last cut off.

If the resume function is off, playback will start from the beginning of the disc.

After the menu has been opened with the SHUTTLE wheel, the display changes:

TMR PLY>OFF

The options available are on and off.

3–2TASCAM MD-801R/P Mk II

Page 21 Page 23
Image 22
Page 21 Page 23
Contents MD-801R@#/ MD-801P@# Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Editing operations Remote control of the MD-801Specifications, etc Use of a keyboard with the MD-801Introduction About the MiniDisc formatAbout the MD-801R/P Mk Care of MD mediaCare of MD media Track titling, etcRack-mounting the unit About the MD-801R/P MkUnpacking the unit Care of the unitAbout this manual Backup memoryAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key Auto CUE key and indicator TOC Write key and indicatorAuto Ready key and indicator Play Mode keyDisplay DisplayRear panel Rear panelAnalog Inputs and trimmers Balanced Analog output function DIP switch bankAnalog Outputs Line and trimmers Remote Serial connector Mode SET DIP switch bankKeyboard connector Remote Control connectorFrame display Menu itemsBasic principles of menu operations Auto cue Jog loop lengthTimer-controlled playback Resume settingResume setting EOM track11Serial communications Incremental play10Incremental play 12Check items14Copy ID Auto track numbering level13Auto track numbering level 15Post-script recordingInserting and ejecting discs Basic operationsPlayback of discs Playback of discs Repeat playback 13Varispeed mode14Jog mode 10Track search operationsRecording operations Recording operationsRebuilding the TOC General notes on recording using the MD formatBasic recording Post-Script recording Track number incrementingReplace recording Sound synchro recording Digital recordingAnalog recording 10Track title copying together with audioBasic editing operations Cancelling an edit operationEditing operations Dividing tracksErasing a track Erasing a trackCombining tracks Moving tracks Moving tracksB point erase operations Erasing from the start of a track B point erase operationsErasing to the end of a track Normal A-B eraseMoving an A-B point Moving an A-B pointRestoring erased material Restoring erased materialChanging track attributes 10Erasing a complete disc Erasing a complete disc11Track and disc title entry Track and disc title entry 11.6Copying disc and track titles Remote control of the MD-801 Tally indicatorsFader start Remote Parallel connectorSequential playback and recording Specifications, etc Error messages and troubleshooting guideSpecifications SpecificationsGeneral MiniDisc Other connections Analog I/ODigital I/O General and electricalRC-801 Remote Control Unit Dimensional drawingDimensional drawing Option RC-8 Remote Control UnitIndex a E AES/EBU Digital InputIndex F P EOMIndex R T Sync IN, Word Sync THRU, WordIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.
Top Page Image Contents