Tascam MD-801P Mk II, MD-801R/P Mk II owner manual Rear panel

Page 18

2 - Rear panel

(6) TRACK TITLE indicator

Lights when track titles are being entered or dis- played. See 5.11, "Track and disc title entry" for details.

(7) DISC TITLE indicator

Lights when the title of the disc is being entered or displayed. See 5.11, "Track and disc title entry" for details.

(8) TRACK NO. display and indicator

This 3-digit 7-segment display usually shows the cur- rent track. It may also be used to show a track num- ber other than the current one, depending on the mode.

When the incremental play mode is on (see 3.10, "Incremental play"), this indicator will flash.

(9) Time display and indicators

Shows the elapsed or remaining time using a 7-digit 7-segment display (3 digits for minutes, 2 for sec- onds and optionally 2 for frames). See the explana- tion of the TIME key [17] for details of the different time display modes.

(10) PGM NO.

Lights in programmed play mode (see 6.2.1, "Enter- ing programmed playback") and is used with the last 2 digits of the time display (9).

(11) Dot-matrix alphanumeric display

These dot-matrix elements are used to display alpha- numeric information: track and disc titles, time dis- play, menu options, etc.

Note that the term “alphanumeric” is not strictly accurate here, as these elements can also display some punctuation as well as Japanese katakana (2).

(12) TOC EDIT indicator

Lights in the U-TOC editing modes and after a disc U-TOC has been edited (see [19]) until it is written to disc.

(13) EOM

Lights briefly at the end of each track, or at the end of the disc.

(14) Peak level meters

Display the signal level on playback or when record- ing (MD-801R only).

RNOTE

The OV E R indicator indicates digital clipping. Digital clipping is a harsh-sounding form of distortion, unlike, say, analog tape saturation, and should be avoided.

When connected to analog equipment, the nominal analog level is referenced to a reading of –16 dB on the meters (see [31]).

(15) REPEAT indicator

Lights when the unit is in repeat playback mode (see [26]).

(16) SINGLE indicator

Lights when a single track has been selected for play- back (see [22]).

(17) A–B indicator

Lights when the A-B playback mode has been selected (see [22]).

2.3 Rear panel

This section gives details of the connections which should be made to and from the MD-801.

NOTES

When making or breaking connections between the MD-801 and other units, make sure the power is turned off to all units. This will avoid possible damage to monitoring equipment, etc. caused by transients.

The use of analog cables is not recom- mended for digital audio use, and TASCAM cannot guarantee reliable performance if such cables are used for digital audio connections.

R[32] DIGITAL INPUT (AES/EBU)

This XLR-type connector accepts digital audio data in AES3-1992 format.

It also accepts balanced data in the IEC 60958 (con- sumer) format (SPDIF).

The input sampling frequency can be 32 kHz,

44.1kHz or 48 kHz. The MD-801’s internal sam- pling frequency converter will convert them all to

44.1kHz for recording.

If switch 4 of the MODE SET DIP switch bank [43] is set off, the signals input here are echoed at the dig-

2–7TASCAM MD-801R/P Mk II

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MD-801R@#/ MD-801P@# Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Editing operations Remote control of the MD-801Specifications, etc Use of a keyboard with the MD-801Introduction About the MiniDisc formatAbout the MD-801R/P Mk Care of MD mediaCare of MD media Track titling, etcRack-mounting the unit About the MD-801R/P MkUnpacking the unit Care of the unitBackup memory About this manualAbout this manual Hookup Examplel Hookup ExamplelFront and rear panel features Front panel Front panel Edit key Auto CUE key and indicator TOC Write key and indicatorAuto Ready key and indicator Play Mode keyDisplay DisplayRear panel Rear panelAnalog output function DIP switch bank Analog Inputs and trimmers BalancedAnalog Outputs Line and trimmers Remote Serial connector Mode SET DIP switch bankKeyboard connector Remote Control connectorFrame display Menu itemsBasic principles of menu operations Auto cue Jog loop lengthTimer-controlled playback Resume settingResume setting EOM track11Serial communications Incremental play10Incremental play 12Check items14Copy ID Auto track numbering level13Auto track numbering level 15Post-script recordingBasic operations Inserting and ejecting discsPlayback of discs Playback of discs Repeat playback 13Varispeed mode14Jog mode 10Track search operationsRecording operations Recording operationsGeneral notes on recording using the MD format Rebuilding the TOCBasic recording Track number incrementing Post-Script recordingReplace recording Sound synchro recording Digital recordingAnalog recording 10Track title copying together with audioBasic editing operations Cancelling an edit operationEditing operations Dividing tracksErasing a track Erasing a trackCombining tracks Moving tracks Moving tracksB point erase operations Erasing from the start of a track B point erase operationsErasing to the end of a track Normal A-B eraseMoving an A-B point Moving an A-B pointRestoring erased material Restoring erased materialChanging track attributes Erasing a complete disc 10Erasing a complete disc11Track and disc title entry Track and disc title entry 11.6Copying disc and track titles Remote control of the MD-801 Tally indicatorsRemote Parallel connector Fader startSequential playback and recording Specifications, etc Error messages and troubleshooting guideSpecifications SpecificationsGeneral MiniDisc Other connections Analog I/ODigital I/O General and electricalRC-801 Remote Control Unit Dimensional drawingDimensional drawing Option RC-8 Remote Control UnitIndex a E AES/EBU Digital InputIndex F P EOMIndex R T Sync IN, Word Sync THRU, WordIndex U W MD-801R@# MD-801P@#

MD-801R/P Mk II, MD-801P Mk II specifications

The Tascam MD-801P Mk II and MD-801R/P Mk II are professional MiniDisc players and recorders that cater to a wide range of audio applications. Recognized for their resilient build quality and impressive sound fidelity, these models bring versatility and reliability to both studio and live environments.

One of the standout features of the MD-801P Mk II and MD-801R/P Mk II is their compatibility with both Playback and Recording functionalities. With support for the MiniDisc format, these devices enable users to record and playback high-quality audio. The MD-801P Mk II focuses on playback, while the MD-801R/P Mk II combines recording and playback capabilities, making it suitable for various audio production needs.

Another notable feature is their digital input and output. Both models are equipped with optical digital connections, ensuring minimal signal degradation during transfer. This is especially valuable for professionals looking to maintain the integrity of their recordings. Additionally, the devices offer analog connections, enhancing their versatility and enabling integration into different audio setups.

The MD-801P Mk II and MD-801R/P Mk II benefit from advanced error correction technology. This aids in maintaining audio quality, even when the disc is scratched or other minor issues occur. The robust error correction systems allow for reliable performance that professionals can depend on, whether in mastering sessions or during live events.

The user interface is designed with simplicity in mind. The clear LCD display provides essential information at a glance, while the intuitive layout of controls allows for easy navigation through functions and settings. Fast access to features like track selection and recording settings empowers users to focus on creativity without unnecessary distractions.

Furthermore, the compact form factor of the MD-801 series makes them ideal for mobile applications, fitting well into both travel and live sound rig setups. Their sturdy construction protects against the rigors of transport, securing the investment for audio professionals.

In conclusion, the Tascam MD-801P Mk II and MD-801R/P Mk II stand out as dependable tools for musicians, sound engineers, and content creators. By combining high-quality audio handling, strong build design, and user-friendly operation, these MiniDisc recorders play an essential role in various audio workflows, ensuring that the delivery of audio remains exceptional and professional.
Top Page Image Contents