Transfer Back to Utility Power Source

Section 6—Operation of Generator with Manual Transfer Switch

TRANSFER TO GENERATOR POWER SOURCE WHEN UTILITY POWER FAILS

1.Move generator to within approximately 10 feet of the power inlet box. Connect ground strap to the generator’s grounding lug and to the grounding rod.

2.Open the door of the Manual Transfer Switch. Slide the mechanical interlock connecting the 60 Amp and 50 Amp circuit breakers at the top of the panel to turn “Off” the “Utility” circuit breaker. Both circuits will be in the “Off” position.

3.Flip the “Standby” circuit breaker handle to the “On” position. Close the door of the Manual Transfer Switch.

4.Open the power inlet box. Insert and lock the 50 Amp

female receptacle into the male receptacle in the external connection box. Insert the 50 Amp plug into the

50 Amp NEMA 14-50 receptacle located on the underside of the generator’s control panel. A retaining clip is supplied on the control panel. Secure the retaining clip over the end of the plug. The retaining clip ensures that the plug remains in place during generator operation.

5.Before starting the generator, verify the 50 Amp circuit breaker on the generator’s control panel is in the “Off” or “Open” position.

6.Start the generator and allow it to warm up for a couple of minutes. Switch the 50 Amp circuit breaker on the generator control panel to the “ON” or “Closed” position.

7.The generator is now supplying power to the load center circuits in the manual transfer switch.

When utility power has been restored, you will want to transfer back to that power source and shut down the generator. This can be accomplished as follows:

1.Switch the 50 Amp circuit breaker on the generator control panel to the “OFF” or “Open” position.

2.Release the retainer clip from the NEMA 14-50 plug and remove the plug from the outlet on the generator. Twist and remove the 50 Amp female receptacle from the power inlet box. Close and lock the box. Coil the power cord and place it with the generator.

3.After the generator has run for a couple minutes to cool down, turn off the generator.

4.Open the door of the Manual Transfer Switch and slide the mechanical interlock to turn “OFF” the “STANDBY” circuit breaker. Both circuit breakers will be in the “OFF” position.

5.Flip the “UTILITY” circuit breaker handle to the “ON” position. Close the door of the Manual Transfer Switch.

6.The Utility is now supplying power.

7.Disconnect the ground strap from the grounding rod and the generator’s grounding lug. Retain the ground strap with the generator. Return the generator to its storage location.

Choose a lamp or light fixture located in a frequently occupied area of the building as a signal light to tell you when utility power has been restored. This light should be on a utility powered circuit only, so it operates independent of the generator.

004583-0 specifications

Generac 004583-0 is a powerful and efficient home standby generator designed to provide reliable backup power during outages. This unit is specifically engineered to ensure that homeowners never have to worry about the disruption caused by power loss, keeping essential appliances and systems running smoothly, regardless of external conditions.

At the heart of the Generac 004583-0 is its robust engine, which delivers a peak output of 22 kW and is capable of running on either propane or natural gas. This fuel flexibility makes it an ideal choice for a variety of households, allowing users to select the fuel source that best fits their needs. The generator employs a high-performance, air-cooled engine featuring a durable construction that ensures long-lasting operation, and this reliability translates into peace of mind for homeowners.

One of the standout features of the Generac 004583-0 is its advanced Automatic Transfer Switch (ATS). The ATS seamlessly detects power outages and automatically switches the home’s electrical supply to the generator within seconds. This quick response is crucial for maintaining comfort and safety, especially during extreme weather conditions. The ATS also offers customizable settings, allowing homeowners to prioritize which circuits they want to power during an outage.

In addition to its seamless operation, the Generac 004583-0 integrates innovative technologies such as Mobile Link. This feature enables users to monitor the generator remotely via a smartphone app, providing real-time updates on the system’s status and maintenance needs. This connectivity enhances user experience and simplifies the management of the generator.

The generator is designed with a noise-reduction enclosure, ensuring that it operates quietly without disturbing daily life or neighborhood peace. Furthermore, the unit is built to withstand various weather conditions, featuring corrosion-resistant materials that ensure durability and a long service life.

Safety is paramount, and the Generac 004583-0 incorporates various safety features such as low oil and high-temperature shut-off sensors. These safeguards protect the engine and enhance the overall reliability of the device.

In summary, the Generac 004583-0 is a top-tier standby generator that combines power, efficiency, and advanced technology. With its robust engine, seamless automatic transfer capabilities, remote monitoring, and focus on safety and durability, it stands out as an excellent solution for homeowners seeking reliable backup power.