Craftsman 919.679580, MGP-679580 Customer Responsibilities Table, Generator Maintenance

Page 13

MAINTENANCE

CUSTOMER RESPONSIBILITIES TABLE

Before each

Every 25

Every 50

Every 100

use

Hours of Every

Hours of Every

Hours of Every

 

Season

Season

Season

MAINTNENANCE TASK

 

 

 

 

 

 

 

Check oil level

X

See Note 2

 

Change oil

 

 

See Note 1

 

 

 

 

Clean Air Filter Assembly

 

X

 

 

 

 

Check Spark Plug

 

X

X

Prepare Unit for Storage

Prepare unit for storage if it is to remain idle for more than 30 days.

Note 1: Change oil after first two (2) operating hours and every 50 operating hours thereafter, more often if operated in extreme dusty or dirty conditions.

Note 2: Check oil after 5 hours of operation (See below - Engine Maintenance - Oil.)

GENERATOR MAINTENANCE

Your generator should be kept clean and dry at all times. The generator should not be stored or operated in enviroments that includes excessive moisture, dust or any corrosive vapors. If these substances are on the generator, clean with a cloth or soft bristle brush. Do not use a garden hose or anything with water pressure to clean the genera- tor. Water may enter the cooling air slots and could possi- bly damage the rotor, stator and the internal windings of the gen head.

All adjustments in the Maintenance section of this manual should be made at least once each season.

ENGINE MAINTENANCE

Oil

•Oil level should be checked prior to each use and at least every 5 hours of operation. To check oil see Adding Engine Oil on page 11.

Changing Engine Oil

For a new engine, change oil after the first 5 operating hours. Thereafter, change oil after every 50 hours of operation.

Change the oil while the engine is still warm. The oil will flow freely and carry away more impurities. Make sure the engine is level when filling, checking or changing oil.

Change the oil as follows:

•To keep dirt, grass clippings, etc. out of the engine, clean the area around the drain plug and plug before removing it.

•Remove the oil drain plug and dipstick. Tilt the engine slightly towards the oil drain to obtain better drainage. Be sure to allow ample time for complete drainage.

•´ Reinstall the drain plug. Make sure it is tightened securely.

•Fill the crankcase with new oil of the proper type (See Adding Oil Section), to the Full mark on the dipstick. Always check the level with the dipstick before adding more oil.

•Reinstall the oil fill cap or plug and tighten securely.

Service Air Cleaner

NOTE: Do not use petroleum solvents, e.g., kerosene, which will cause the cartridge to deteriorate. Do not use pressurized air to clean cartridge. Pressurized air can damage the cartridge.

To service air cleaner follow these steps:

•Loosen cover screws. Remove cover and air cleaner assembly from base.

•Remove air cleaner assembly from inside of cover and disassemble.

13 — ENG

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8 Owners ManualTable of Contents Risk of Electrocution and Fire Safety Guidelines DefinitionsRisk of Electrocution and Fire cont’d ANY Confined Area Risk of FireRisk of Breathing Inhalation Hazard Risk of HOT Surfaces Risk of Unsafe OperationRisk of Moving Parts Carton Contents AssemblyRisk from Lifting Remove Generator from CartonKnow Your Generator OperationFull Power Switch Battery InstallationReceptacles Generator CapacityObtaining Electricity from Generator Connecting Generator To Main Electrical SupplyBefore Starting Engine Extension CordGeneral Recommendations To Start Your GeneratorGenerator Maintenance MaintenanceEngine Maintenance Service Air CleanerClean and Replace Spark Plug Service AdjustmentsClean Guard/Muffler CarburetorEngine Preparation Storage InstructionsGenerator ENG ENG PartsDirect Vendu par Sears Canada, Inc., Toronto, Ont. M5B 2B8 Génératrice DEEntretien Table DES MatièresConserver CES Directives Mesures DE Sécurité DéfinitionsAvertissement Risques D’ÉLECTROCUTION ET D’INCENDIE Suite Rieur OU Dans UN Endroit Clos Risques D’INCENDIERisques AUX Voies Respiratoires ET Risques D’INHALATION Risques Reliés AUX Surfaces Chaudes Risques D’UNE Utilisation DangereuseRisques Reliés AUX Pièces Mobiles Assemblage Risques Lors DU LevageContenu DE L’EMBALLAGE Retrait DE LA Génératrice DE SON EmballageBien Connaître Votre Génératrice FonctionnementPrises DE Courant Installation de la batterieInterrupteur DE Pleine Puissance Capacité DE LA GénératriceRallonges Avant DE Démarrer LE MoteurRemplissage d’huile moteur Démarrage de la génératrice Recommandations GénéralesEntretien DE LA Génératrice EntretienEntretien DU Moteur Entretien du filtre à airNettoyage du protecteur/silencieux Réglages D’ENTRETIENCarburateur RégulateurDirectives Pour L’ENTREPOSAGE EntreposagePréparation du moteur GénératriceResponsabilités de garantie du propriétaire Entretien inadéquat Entretien ET Pieces DE Rechange

MGP-679580, 919.679580 specifications

The Craftsman 919.679580, also known as the MGP-679580, is a high-quality portable air compressor designed to meet the needs of both DIY enthusiasts and professional tradespeople. This versatile tool is particularly well-regarded for its powerful performance, user-friendly features, and durable construction, making it a popular choice for a variety of applications.

One of the standout features of the Craftsman 919.679580 is its efficient motor, which provides ample power to deliver a maximum pressure of up to 150 PSI. This high-pressure capability ensures that the compressor can handle a wide range of tasks, from inflating tires to powering pneumatic tools. With a generous 6-gallon tank, the unit maintains a continuous supply of air, allowing for extended use without frequent interruptions for recharging.

The dual piston pump system is designed to enhance the compressor's performance, ensuring quicker recovery times and increased airflow. This technology enables the 919.679580 to operate efficiently, producing a consistent output that meets the demands of more intensive tasks. Additionally, the oil-free design of the pump not only minimizes maintenance but also promotes a cleaner working environment, as there is no risk of oil spills or mess.

User convenience is another hallmark of the MGP-679580. The unit comes equipped with an ergonomic handle and lightweight construction, allowing for easy portability. Integrated cord storage and hose management features also help keep workspaces organized, reducing clutter and enhancing safety.

The Craftsman 919.679580 prioritizes safety and user-friendliness by incorporating features such as a durable, protective housing that guards against damage during transportation. The pressure gauge and regulator are easily accessible, allowing users to monitor and adjust pressure levels as needed.

In conclusion, the Craftsman 919.679580, MGP-679580, distinguishes itself in the market with a blend of powerful performance, innovative technology, and practical features. Its durable construction and ease of use make it an excellent investment for anyone in need of a reliable air compressor. Whether for home improvement projects, automotive tasks, or professional applications, this compressor is built to deliver the performance and reliability that users demand. Its balanced design ensures that it can tackle the toughest jobs while remaining accessible for everyday use, solidifying its reputation as a must-have tool in any toolkit.
Top Page Image Contents