Black Box LE172, LE075A-R2, LE072A Install the AC Power Adapter, Installing the AC Power Adapter

Page 12

CHAPTER 3: Installation

3.5 Install the AC Power Adapter

If the SPC is not used, plug the AC power adapter cable into the small round socket at the back of the Modular Media Unit, as shown in Fig. 3-6. Plug the other end of the AC adapter cable into any standard electrical outlet. The red LED will then light up.

Fig. 3-6. Installing the AC Power Adapter.

11

Image 12

Contents Modular Parallel Adapters Modular Media Units FCC Statement Contents Specifications Introduction Available ModelsBNC AUIFeatures Illustrates a typical adapter and media unitInstallation Attach the Media UnitConnect the Network Cable 1 LE071A and LE073AConnecting an RG-58/U Coaxial Cable to the Media Unit 2 LE072A and LE074AConnecting an AUI Cable to the Media Unit 3 LE075AInstall the Self-Powering Cable SPC Plug the Ethernet Adapter into the ComputerInstall the AC Power Adapter Installing the AC Power AdapterSoftware Setup and Operation Supplied FilesDOS ODI Driver for Novell NetWare \ETHERNET\POCKET\EPP Frame ETHERNET802.2 Disablelink Link Driver Setodi Polling UnidirEnabled Microsoft LAN ManagerLSL Setodi Ipxodi Netx EPP Disablelink Modadpt Adapter DRIVERNAME=SETNDIS$ Polling UnidirMicrosoft Windows for Workgroups LANtastic/Al version 5.x Driver DRIVERNAME=SETNDIS$Packet Driver HELP, XEROX, IEEE, MPXShare ServerModular Parallel Adapters and Modular Media Units Self-Test and Diagnostics DiagnosticsLPT Report Error Messages Modadpt Ethernet Adapter is not connected or not poweredAdapter failed to initialize correctly Modadpt Ethernet Adapter Memory RAM failureCustomer Service Information Copyright 1996. Black Box Corporation. All rights reserved