Black Box LE073AE-R2, LE172, LE075A-R2, LE074AE-R2, LE072A, LE075AE-R2, LE074A-R2, LE076A FCC Statement

Page 2

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for Radio noise emission from digital apparatus set out in the Radio Interference Regulation of IndustryCanada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par Industri Canada.

TRADEMARKS

DECand Pathworksare trademarks of Compaq Computer Corporation. OS/2® is a registered trademark of IBM Corporation.

Novell® and NetWare® are registered trademarks of Novell Incorporated. ODIis a trademark of Hewlett-Packard.

Microsoft® is a registered trademark of Microsoft Corporation. 3Com® is a registered trademark of 3Com Corporation. 3+Openis a trademark of 3Com Corporation.

IPXis a trademark of Novell Incorporated. Banyan® is a registered trademark of ePresence, Inc. VINESis a trademark of ePresence, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

1

Image 2
Contents Modular Parallel Adapters Modular Media Units FCC Statement Contents Specifications BNC IntroductionAvailable Models AUIFeatures Illustrates a typical adapter and media unitInstallation Attach the Media UnitConnect the Network Cable 1 LE071A and LE073AConnecting an RG-58/U Coaxial Cable to the Media Unit 2 LE072A and LE074AConnecting an AUI Cable to the Media Unit 3 LE075AInstall the Self-Powering Cable SPC Plug the Ethernet Adapter into the ComputerInstall the AC Power Adapter Installing the AC Power AdapterDOS Software Setup and OperationSupplied Files ODI Driver for Novell NetWare \ETHERNET\POCKET\EPP Frame ETHERNET802.2 Disablelink Link Driver Setodi Polling UnidirLSL Setodi Ipxodi Netx EnabledMicrosoft LAN Manager EPP Disablelink Modadpt Adapter DRIVERNAME=SETNDIS$ Polling UnidirMicrosoft Windows for Workgroups LANtastic/Al version 5.x Driver DRIVERNAME=SETNDIS$Share Packet DriverHELP, XEROX, IEEE, MPX ServerModular Parallel Adapters and Modular Media Units Self-Test and Diagnostics DiagnosticsLPT Report Adapter failed to initialize correctly Error MessagesModadpt Ethernet Adapter is not connected or not powered Modadpt Ethernet Adapter Memory RAM failureCustomer Service Information Copyright 1996. Black Box Corporation. All rights reserved