Black Box LE172, LE075A-R2, LE073AE-R2, LE072A Connect the Network Cable, 1 LE071A and LE073A

Page 8

CHAPTER 3: Installation

3.2 Connect the Network Cable

Connect the network cable unit as illustrated for each model below.

3.2.1 LE071A AND LE073A

For the Modular Parallel Adapter w/SPC for 10BT (LE071A) and the Modular Parallel Adapter w/EPS for 10BT (LE073A), refer to Fig. 3-2.

NOTE

When used with non- 10BASE-T networks, Link Integrity should be disabled. It can be disabled in the software by using the key- word DISABLELINK in the configuration files (NET.CFG, PROTOCOL.INI) or as a com- mand line parameter for the Packet and LANtastic drivers.

Fig. 3-2. Connecting an Unshielded Twisted Pair Cable to the Media

Unit.

7

Image 8

Contents Modular Parallel Adapters Modular Media Units FCC Statement Contents Specifications Introduction Available ModelsBNC AUIFeatures Illustrates a typical adapter and media unitInstallation Attach the Media UnitConnect the Network Cable 1 LE071A and LE073AConnecting an RG-58/U Coaxial Cable to the Media Unit 2 LE072A and LE074AConnecting an AUI Cable to the Media Unit 3 LE075AInstall the Self-Powering Cable SPC Plug the Ethernet Adapter into the ComputerInstall the AC Power Adapter Installing the AC Power AdapterDOS Software Setup and OperationSupplied Files ODI Driver for Novell NetWare \ETHERNET\POCKET\EPP Frame ETHERNET802.2 Disablelink Link Driver Setodi Polling UnidirLSL Setodi Ipxodi Netx EnabledMicrosoft LAN Manager EPP Disablelink Modadpt Adapter DRIVERNAME=SETNDIS$ Polling UnidirMicrosoft Windows for Workgroups LANtastic/Al version 5.x Driver DRIVERNAME=SETNDIS$Packet Driver HELP, XEROX, IEEE, MPXShare ServerModular Parallel Adapters and Modular Media Units Self-Test and Diagnostics DiagnosticsLPT Report Error Messages Modadpt Ethernet Adapter is not connected or not poweredAdapter failed to initialize correctly Modadpt Ethernet Adapter Memory RAM failureCustomer Service Information Copyright 1996. Black Box Corporation. All rights reserved