Briggs & Stratton 30227 Install Wheel Kit, Refer to and install the wheel kit as follows

Page 7

ASSEMBLY

6500W Portable Generator

PowerBOSS™

 

 

 

Install Wheel Kit

The wheel kit is designed to greatly improve the portability of your generator.

NOTE: Wheel kit is not intended for over-the-road use.

You will need the following tools to install this wheel kit:

•1/2" or 13mm socket wrench

•1/2" or 13mm open end wrench

•7/16" socket wrench

•7/16" open end wrench

•Needle-nose pliers

NOTE: Adjustable wrenches may be substituted for open end wrenches.

Refer to Figure 2 and install the wheel kit as follows:

1.Place the bottom of the generator frame on a flat, even surface.Temporarily place unit on blocks to ease assembly.

2.Slide axle through both axle mounting brackets on cradle frame, as shown in Figure 2.

3.Slide a wheel over the axle.

NOTE: Be sure to install both wheels with the air pressure valve on the outboard side.

4.Slide a flat washer over the axle and place the e-ring onto the groove in the axle.

5.Place one end of the needle nose pliers on the bottom of the axle and the other end of the pliers on top of the e-ring. Seat the e-ring by pressing the pliers closed.

6.Repeat step 3 through 5 to secure second wheel.

7.Remove the temporary blocks.

8.Attach the vibration mounts to the support leg with 1/4-20 x 3/4” capscrews and 1/4-20 lock nuts.

9.To aid support leg assembly, rest generator on cradle, engine end down.

10.Attach support leg with M8 x 20 mm cap screws and

M8 lock nuts. Rest generator on wheels and support leg.

11.Attach handles to handle brackets on generator frame, as shown in Figure 2, with M8 x 45 mm capscrews, flat washers, nylon washers, and M8 lock nuts.

NOTE: Be sure to install nylon washers between handle brackets on generator frame and brackets on handle assembly.

12.Loop handle pins to generator frame as shown in Figure 2. Raise handles and insert handle pins to move generator.

13.Check each fastener to ensure it is secure and the tires are inflated between 15-40 PSI.

Figure 2 — Install Wheel Kit

Handle Pin

 

 

 

 

Typical Generator Shown

Nylon Washer

 

 

Nylon Washer

 

 

45 mm Cap Screw

 

 

Flat Washer

 

Wheel

Nut

 

 

Handle

 

 

 

 

Flat Washer

1/4-20 Nut

Axle

 

 

 

 

20 mm Cap Screw

 

M8 Nut

 

E-Ring

Vibration Mount

Support Leg

 

 

 

3/4” Cap Screw

M8 Nut

 

 

7

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model / Modelo 030227 6500W Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment When Adding or Draining FuelWhen Starting Equipment When Operating EquipmentWhen Testing for Engine Spark When Adjusting or Making Repairs to Your GeneratorChoke Lever Know Your GeneratorRemove Generator From Carton Assembly Electric StartCarton Contents Check Battery / Attach Negative Battery WireCap Screw Install Wheel KitRefer to and install the wheel kit as follows Vibration MountAdd Engine Oil When Adding FuelBefore Starting the Engine Add FuelGenerator Location Using the GeneratorConnecting to a Building’s Electrical System System GroundStopping the Engine Connecting Electrical LoadsOperating Generator Starting the EngineVolt AC, 20 Amp, Duplex Receptacle Battery ChargerReceptacles 120/240 Volt AC, 30 Amp, Locking ReceptacleCold Weather Operation Remove shelter when temperatures are above 40F 4CExample Power ManagementDont Overload Generator CapacityGeneral Maintenance Recommendations SpecificationsGenerator Storage StorageEngine Storage Other Storage Tips Problem Cause Correction TroubleshootingYear Consumer Use Years Years orAdvertencia Conserve Estas Instrucciones Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Transporte O Repare EL Equipo Cuando Añada Combustible O Vacíe EL DepósitoCuando Ponga EN Funcionamiento EL Equipo Cuando Opere EL EquipoCuando Ajuste O Haga Reparaciones a SU Generador PrecauciónCuando Pruebe LA Bujía DEL Motor Tomacorriente con Dispositivo de Seguridad de Conozca SU GeneradorContenido De La Caja MontajeArranque Eléctrico Para Retirar el Generador de la CajaArandelas de Nylon Instale el Juego de RuedasCuando Añada Combustible Antes DE Darle Arranque AL MotorAgregar Aceite al Motor Agregue CombustibleConexión al Sistema Eléctrico de un Edificio USO DEL GeneradorTierra del Sistema Ubicación del GeneradorParado Del Motor Operando EL Generador PrecauciónEncienda el Motor Conexion De Cargas ElectricasVolt AC, 20 Amp, Receptáculo Dobles Receptáculos PrecauciónCargador DE Batería 120/240 Voltios AC, 30 Amp, Receptáculo de SeguridadArranque el motor y manténgalo en marcha en exteriores Operación Durante UN Clima FríoEjemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaRecomendaciones Generales DE Mantenimiento EspecificacionesAlmacenando el Motor Diagnositicos DE AveríasAlmacenamiento Almacenando el GeneradorGarantía Limitada

30227 specifications

Briggs & Stratton 30227 is a high-performance portable generator designed to meet the power needs of residential and professional users alike. This versatile generator is ideal for providing backup power during outages, powering outdoor events, or operating tools on job sites. With its robust design and advanced technologies, the 30227 stands out as a reliable solution for those seeking portable power.

One of the main features of the Briggs & Stratton 30227 is its powerful engine. It is equipped with a 206cc engine that delivers a peak output of 3,500 watts and a rated output of 3,000 watts. This ample power allows users to run multiple devices simultaneously, making it ideal for everything from refrigerators and sump pumps to power tools and lights. The generator is capable of providing enough energy to cover essential household appliances during emergencies.

The 30227 is designed with convenience and ease of use in mind. It has a compact and lightweight design, which enhances portability and allows for easy transport. Additionally, the integrated handlebars and wheels make maneuvering the generator simple, even in challenging terrains. The generator features a user-friendly control panel equipped with multiple outlets, including two 120V household outlets, one 12V DC outlet, and one 120V twist-lock outlet. This variety of options allows users to connect various devices without hassle.

Briggs & Stratton has incorporated several advanced technologies into the 30227 to enhance its performance and reliability. The generator is equipped with a Dual Fuel Capability, allowing it to run on both gasoline and propane. This flexibility means users can decide their preferred fuel source based on availability and convenience. This feature provides peace of mind during extended outages where fuel options may be limited.

A noteworthy characteristic of the 30227 is its Quiet Power Technology, which significantly reduces noise levels while the generator operates, making it more suitable for residential use and outdoor events. Enhanced noise reduction does not compromise its performance, maintaining an efficient output while providing a more pleasant environment.

Moreover, the generator has an easy-to-read fuel gauge and a low-oil shutdown feature that automatically turns off the engine when oil levels are low, protecting the engine from damage. This attention to detail underscores Briggs & Stratton's commitment to quality and reliability.

In conclusion, the Briggs & Stratton 30227 generator combines a powerful engine, user-friendly features, and innovative technologies, making it an excellent choice for anyone seeking a dependable portable power solution. Whether for emergency backup, outdoor activities, or onsite projects, this generator is designed to deliver outstanding performance and versatility.
Top Page Image Contents