Briggs & Stratton 030209 Before Starting the Engine, Add Engine Oil, Add Fuel, When Adding Fuel

Page 7

5500W Portable Generator

5.Place one end of the needle nose pliers on the bottom of the axle and the other end of the pliers on top of the e-ring. Seat the e-ring by pressing the pliers closed.

6.Repeat step 3 through 5 to secure second wheel.

7.Remove the temporary blocks.

8.Attach support leg using two 1/2” or 13mm wrenches with 20mm cap screws and lock nuts.

9.Center lifting handle on generator end of cradle. Attach handle using two 1/2” or 13mm wrenches with 45mm capscrews and hex nuts.

BEFORE STARTING THE ENGINE

Add Engine Oil

• Place generator on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine owner’s manual and follow oil recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine Modifications).

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

1.Use clean, fresh, regular UNLEADED fuel with a minimum of 85 octane. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 1.5" of tank space for fuel expansion (Figure 2).

Figure 2 - Fuel Expansion

 

AirSpace

Tank

 

 

 

Fuel

 

1.5”

 

 

 

 

4.

Install fuel cap and wipe up any spilled fuel.

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 030209 5500W Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment When Adding or Draining FuelWhen Starting Equipment When Operating EquipmentWhen Testing for Engine Spark When Adjusting or Making Repairs to Your GeneratorKnow Your Generator Remove Generator From Carton AssemblyInstall Wheel KIT Carton ContentsAdd Engine Oil When Adding FuelInstall fuel cap and wipe up any spilled fuel Before Starting the EngineGenerator Location Using the GeneratorConnecting to a Building’s Electrical System System GroundStopping the Engine Connecting Electrical LoadsOperating Generator Starting the EngineHot Receptacles120/240 Volt AC, 30 Amp, Locking Receptacle Volt AC, 20 Amp, Duplex ReceptaclesExample Power ManagementDont Overload Generator CapacityGenerator Maintenance SpecificationsGeneral Maintenance Recommendations Engine MaintenanceGenerator Storage StorageEngine Storage Other Storage Tips Problem Cause Correction TroubleshootingYear Consumer Use Years Years orAdvertencia Tabla DE ContenidosDescripción DEL Equipo Instrucciones DE SeguridadCuando Transporte O Repare EL Equipo Cuando Añada Combustible O Vacíe EL DepósitoCuando Ponga EN Funcionamiento EL Equipo Cuando Opere EL EquipoCuando Ajuste O Haga Reparaciones a SU Generador PrecauciónCuando Pruebe LA Bujía DEL Motor Tapa del Depósito del Aceite Llene el motor con aceite Conozca SU GeneradorCortacircuitos Tuerca Mariposa de Conexion a TierraContenido de la Caja MontajeInstale EL Juego DE Ruedas Para Retirar El Generador De La CajaColoque la generador sobre una superficie nivelada Antes DE Darle Arranque AL MotorAgregar Aceite al Motor Agregue CombustibleConexión al Sistema Eléctrico de un Edificio USO DEL GeneradorTierra del Sistema Ubicación del GeneradorParado Del Motor Operando EL Generador PrecauciónEncienda el Motor Conexion De Cargas ElectricasJuego de Cable de 4 Alambres 240V 120V Neutro Cargado Receptáculos Precaución120/240 Voltios AC, 30 Amp, Receptáculo de Seguridad Volt AC, 20 Amp, Receptáculos DoblesEjemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaPara Limpiar el Generador EspecificacionesRecomendaciones Generales DE Mantenimiento Mantenimiento del MotorAlmacenando el Motor Diagnositicos DE AveríasAlmacenamiento Almacenando el GeneradorGarantía Limitada

030209 specifications

Briggs & Stratton 030209 is a notable product in the power equipment industry, primarily recognized for its robust and efficient performance. This portable generator is specifically designed to meet the demands of both residential and recreational needs, making it a versatile choice for users.

One of the standout features of the Briggs & Stratton 030209 is its compact and lightweight design. Weighing in at just under 100 pounds, it is easy to transport and store, making it a preferred option for camping trips, tailgating, or emergency backup for power outages. The generator comes equipped with a reliable 2100 watt engine that ensures a consistent power supply, operating quietly while delivering excellent performance.

The generator features a 2.8-gallon fuel tank which allows for extended runtime, providing up to 10 hours of continuous operation at a 25% load. This means that users can rely on the Briggs & Stratton 030209 to keep essential devices running for an extended period without frequent refueling.

Equipped with multiple outlets, including two 120-volt household outlets and one 12-volt DC outlet, the generator accommodates a variety of devices, from small appliances to communication tools and even recreational equipment. Furthermore, it incorporates an advanced inverter technology, which supplies clean and stable power. This is particularly important for sensitive electronics, ensuring they operate safely without the risk of damage.

Safety features are also paramount in the design of the Briggs & Stratton 030209. It includes a low oil shutdown system that automatically turns off the engine to prevent damage when oil levels are low. The generator’s durable construction ensures it can withstand outdoor conditions, while an easy-to-read fuel gauge provides users with quick access to fuel status.

Overall, the Briggs & Stratton 030209 is a reliable and efficient portable generator, perfect for those in need of dependable power in various situations. Its combination of portability, powerful performance, and safety features makes it a top choice among consumers who seek quality and durability in their power equipment.
Top Page Image Contents