Craftsman 580.327141 To Start The Engine, Connecting Electrical Loads, Stopping the Engine

Page 8

To Start The Engine

,_ WARNING! Never start or stop engine with electrical devices plugged into the panel

receptacles AND turned on.

•Unplug all electrical loads from generator receptacles before starting the engine.

•Make sure the unit is in a level position.

•Turn the fuel shut-off valve to ON position.

Connecting Electrical Loads

•Do Not connect 240 Volt loads to the 120 Volt duplex receptacles.

•Do Not connect 3-phase loads to the generator.

•Do Not connect 50 Hz loads to the generator.

•Plug in and turn on the desired 120 and/or 240 Volt

AC, single phase, 60 Hertz, electrical loads. DO NOT OVERLOAD THE GENERATOR. See "Don't

Overload the Generator" on page 10.

•Locate the Idle Control On/Off switch on the control panel and set it to the "Off" position.

•Place the Run/Stop switch in the "Run" position.

•Move engine choke lever to the "Full" choke position.

 

 

ALF

_

AUTION!

Never run engine indoors or in

 

enclosed poorly ventilated areas. Engine

 

exhaust contains carbon monoxide, an odorless

 

and deadly

gas.

,_ WARNING! Temperature of muffler and nearby areas may exceed 150°F (65°C). Avoid these

areas.

•Grasp starter handle and pull slowly until you feel some resistance. Then pull with one rapid full arm stroke. Let rope return slowly. Do Not let rope "snap back" against starter.

•If engine starts, move choke lever to "Run" position. Allow engine to warm up for two minutes before applying load to generator.

•If engine falters, move choke lever to "Half" choke position and pull starter handle twice.

NOTE: If engine fails to start after 3 pulls, move the choke lever to "Full" position and repeat starting instructions.

•Set the Idle Control On/Off switch to the "On" position.

Stopping the Engine

•Unplug all electrical loads from generator panel receptacles. Never start or stop engine with electrical devices plugged in and turned on.

•Turn "Off" the Idle Control switch.

•Let engine run at no-load for several minutes to stabilize the internal temperatures of engine and generator.

•Move Run/Stop switch to the "Stop" position.

•Close the fuel valve.

Operating Automatic Idle Control

This switch is designed to greatly improve fuel economy. When this switch is turned "On," the engine will only run at its normal high governed engine speed while an electrical load is connected. When the

electrical load is removed, the engine will run at a reduced speed. With the switch "Off," the engine always runs at the normal high engine speed. Always

have the switch Off when starting and stopping the engine.

Low Oil Pressure Shutdown System

The engine is equipped with a low oil pressure sensor that shuts down the engine automatically when the oil pressure drops below 6 psi. If the engine shuts down by itself and the fuel tank has enough gasoline, check engine oil level.

Initial Start-up

A delay built in the low oil shutdown system allows oil pressure to build during starting. The delay allows the engine to run for about 10 seconds before sensing oil pressure.

Sensing Low Pressure

If the system senses low oil pressure during operation, the engine shuts down. As the system shuts down, the low oil light comes ON. However, once the engine has stopped rotating, this light will go OFF.

Restarting

If you try to restart the engine within 10 seconds after it shuts down, the engine may NOT start. The system needs 5 to 10 seconds to reset.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Before using this product, read this Manual and follow all its Safety RulesOperating Instructions Sears, Roebuck and Co, Hoffman Estates, ILLimited Warranty for Deluxe Portable Generators Consumer CommercialExplosion Assembling the Wheel KIT Carton ContentsTo Remove the Generator From Carton Know Your Generator Cord Sets and Connector Plugs Volt AC Duplex Receptacle120/240 Volt AC, 20 Amp Receptacle Volt AC, 30 Amp ReceptacleHOW to USE Your Generator Grounding The GeneratorAdd Gasoline Before Starting The GeneratorConnecting Electrical Loads To Start The EngineStopping the Engine Operating Automatic Idle ControlVolt D.C Charging a BatteryTo recharge 12 Volt batteries, proceed as follows Device Load Watts Dont Overload GeneratorReference Guide Maintenance Schedule Product SpecificationsGenerator Maintenance General RecommendationsEngine Maintenance Clean/Replace Spark PlugChecking Oil Level Changing Engine Oil and Oil FilterService Air Cleaner Clean Spark Arrester ScreenTo clean or replace paper air filter Clean and inspect the spark arrester screen as followsRetorque Head Bolts Adjusting Valve ClearanceTo adjust valve clearance General Long Term StorageProtect Fuel System Change OilCorrection ProblemCause Page BLK LH Craftsman 4200 Watt AC GeneratorQlC Craftsman 4200 Watt AC Generator Main Unit m Exploded View Not Illustrated Craftsman 4200 Watt AC Generator Main Unit m Parts ListQty Description Pa # Qty Description B1431 PANEL, Control 83975 BOX, Control Item Qty. Description Engine, 7.8 HP, Generac Power Systems, EHC LO0 25OPan # PaN # Qty Description Qty Description 94820 Page What is Covered What is not CoveredOperacion 33-38 Page Juego DE Ruedas Para Retirar EL Generador DE LAConozca SU Generador Juegos DE Cordones Y Enchufes Conectores Tomacorrientes Doble de 120 VoltiosTomacorrientes de 120/240 Voltios, 20 Amperios Tomacorrientes de 120 Voltios AC, 30 AmperiosComo Usar SU Generador Antes DE Darle Arranque AL GeneradorConexion a Tierra del Generador Agregue GasolinaPara Darle Arranque AL Motor Funcionamiento DEL Control Automatico DE Marcha ENParade del Motor Sistema de Apagado por Baja Presion de AceiteOperacion EN Clima Frio Carga DE LA BateriaDeteccion de Baja Presion Arranques SucesivosNo Sobrecargue EL Generador Guia DE Referencia DE VatiajePrograma DE Mantenimiento Especificaciones DEL ProductoRecomendaciones Generales Mantenimiento DEL GeneradorMantenimiento DEL Motor Para limpiar el GeneradorRevision del Nivel de Aceite Cambio de Aceite del Motor y FiltroProporcione Servicio al Depurador de Aire Limpie la Pantalla ApagachispasVuelva a Apretar los Pernos de Cabeza Ajuste de la Separacion de las VlvulasOtras Sugerencias Para EL Almacenamiento GeneralidadesAlmacenamiento Para Periodos Prolongados Problema Page Page QUE Esta Cubierto Sears

580.327141 specifications

The Craftsman 580.327141 is a powerful, versatile lawn mower designed for homeowners who seek efficiency and ease of use in maintaining a pristine lawn. With a combination of advanced features and user-friendly technologies, the 580.327141 is built to perform admirably across various yard sizes and conditions.

One of the standout features is its robust engine, which delivers reliable power for effective mowing. The 580.327141 is equipped with a user-friendly starting mechanism, making it easy for users to get the mower running without the hassle often associated with traditional pull-start engines. This convenience enhances the overall user experience, particularly for those who may not have prior experience with lawn maintenance equipment.

The cutting deck of the Craftsman 580.327141 boasts a durable construction, providing a reliable cutting surface that can handle tall grass and uneven terrain. Its adjustable cutting heights allow users to customize the length of their grass according to personal preference and seasonal needs, ensuring a well-manicured appearance throughout the year.

In addition to these fundamental features, the Craftsman 580.327141 incorporates modern technology for optimal performance. The mower's design emphasizes maneuverability, with a lightweight frame that makes it easier to navigate around obstacles such as trees, flower beds, and garden decorations. This agility is further enhanced by its smooth-rolling wheels, which offer great traction on various surfaces.

Another notable characteristic is its grass collection system, designed to efficiently gather clippings and debris for a cleaner mowing experience. This feature not only saves time by reducing the need for additional cleanup but also promotes a healthier lawn by allowing for easy composting of clippings.

Users will also appreciate the ergonomic handle design, which minimizes strain during prolonged mowing sessions. Comfort grips and adjustable height settings ensure that different users can find their perfect comfortable stance, making lawn care less of a chore.

In conclusion, the Craftsman 580.327141 stands out as an excellent lawn mower choice for homeowners seeking a blend of power, convenience, and advanced technology. With its reliable engine, adjustable cutting heights, maneuverable design, and efficient grass collection system, it provides a superior mowing experience that caters to a wide range of lawn care needs.
Top Page Image Contents