Classe Audio SSP-600 owner manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classe products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.

Please record the serial number for your new Classé component here for future reference.

Serial #: __________________

Image 2
Contents SSP-600 Surround Processor Page Important Safety Instructions Contents OSD Welcome to the Classé family Unpacking and Placement Placement Ventilation Custom installations Serial numberWarm up/break-in period Please read this manual… Operating Voltage Word About Installation THX Ultra Special Design FeaturesTranscoding Page THX Ultra 2 Music Mode THX Ultra 2 Cinema Mode Boundary Gain Compensation flexible GUIExtraordinary longevity Connect your source components to the SSP-600 Initial SetupConnect your SSP-600 to your power amplifiers Special Note for Subwoofer Please take a moment to read the rest of this manual Front Panel Standby button & LED indicatorFlashing on power-up Initialization StandbyMute button Menu buttonLCD touchscreen IR windowVolume Knob Rear Panel Composite Video Inputs Balanced Analog Audio InputComposite Video Outputs Video InputsOptical Digital Audio Output Balanced Main Analog Audio OutputsVideo Outputs 10 AES/EBU Digital Input Coaxial Digital InputsOptical Digital Inputs Classé can Bus Control PortsIR Input Main and Zone 12 RS-232 Control Port This port has two purposesAnalog Audio Inputs DC Trigger OutputsMicrophone Input Analog Audio Outputs stereoComponent Video Inputs and Output 18 7.1 Channel Analog Audio InputSingle-ended Main Analog Audio Outputs AC Mains Power Switch AC Mains InputBasic Functions Remote ControlVolume Keys Audio Processing KeysNavigation and Control Menu Keys F1/F2/F3/F4 keysUnderstanding Surround Sound How many channels? Matrix or discrete?Multichannel formats Post-processing possibilitiesName Description Using the SSP-600 Source selection Mode selectionVideo preview Controls System trims Zone control Position select System setup Menu SystemVolume setup RotaryPage Max volume Startup volume Mute setup Input setup Page Page Speaker setup Page Profiles Triggers setup Teach IRDisplay setup Brightness TimeoutImportant Note Temp. display VolumeLanguage Dolby/DTS setup Dolby Pro LogicDTS Neo6 Remote FkeysStatus Version info SensorsThere is no sound and the Standby LED is not lit TroubleshootingEverything appears to be on, but there is no sound There is a hum coming out of the speakers IR remote control seems not to functionOnly one speaker seems to be playing There is a hum coming from the unitCare & Maintenance Crosstalk any input to any output SpecificationsDistortion THD + noise Classé AudioDimensions Page Asia 852 2790 Email classe@bwgroup.hk