Classe Audio SSP-600 owner manual AC Mains Power Switch, AC Mains Input

Danger!

30

Note that the three analog video standards offer varying degrees of performance:

•Component video offers the highest picture quality

•S-Video is second-highest in picture quality

•Composite video offers the lowest picture quality

For this reason, you are advised to use component video connections whenever possible, and S-video connections when component is not available. Composite video connections should be used when the other options are not available, or on less critical sources (e.g., a VHS video cassette recorder, or perhaps a video game).

The Component OUTPUT makes the selected video signal available to your main display in a Component video format, regardless of the format in which it was received by the SSP-600. This includes both standard definition and high definition video signals.

For your convenience, all standard definition Component video signals are converted to S-video and composite video for display via this output.

BYPASS MODE: In order to preserve the highest-possible signal integrity on the Component video path, no On Screen Display is available.

21AC Mains Power Switch

The main power switch for the SSP-600 is adjacent to the receptacle for the power cord.

Switching the unit on puts it in standby mode. The surround processor should be in standby before being switched off.

Potentially dangerous voltages and current capabilities exist within your surround processor, even when disconnected from AC mains. Do not attempt to open any portion of the surround processor’s cabinet. There are no user-serviceable parts inside your surround processor. All service of this product must be referred to a qualified authorized Classé dealer or distributor.

22AC Mains Input

An IEC standard power cord (supplied) is used with the SSP-600. Plug the cord into the IEC receptacle provided, and the other end into a suitable wall outlet.