Classe Audio Ultimate Guide to Classe SSP-600 Navigation and Control Features

Page 32

Note:

32

5Navigation and Control Menu Keys

The five keys at the center of this group are the navigation keys. They are similar to what you may have seen on remote controls for DVD players, and are used to navigate of the menu systems of the SSP-300. The four keys around the navigation keys are used to directly access certain control menu screen.

Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highlighted item up/down/ left/right as you like, from the comfort of your listening position.

The Enter key allows you to select the highlighted item, having the same effect as if you had pressed the button on the LCD touchscreen.

The Setup key brings up the System Setup menu screen. From there you can access screens that customize the volume control operation, control the inputs to your particular source components, set up the loudspeaker configuration and calibration, create shortcuts to your preferred or most frequently used functions and program the behavior of the SSP-300’s DC triggers.

Home returns you to the start-up screen and offers four buttons (source, video preview, modes, and control). This provides a quick way to get back to normal operation, regardless of how deep you might be in the menu system.

The Trim key takes you directly to the system trims screen in the menu system. Using the touchscreen or the remote control navigation keys you can adjust the speaker(s) as desired. Adjust the relative balance of the system by using the Enter key on the remote to “press” the appropriate button on the display.

The Zone key brings up the Zone Control menu on the on- screen display, allowing you to make changes to the status, source or the volume of the remote zone.

6F1/F2/F3/F4 keys

F1/F2/F3/F4 keys are available for controlling aspects of the SSP-300 not covered by the other buttons on the remote control. You are able to choose what the SSP- 300 should do in response to receiving the infrared signal that a particular Fkey has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see the section The Menu System, in this manual).

The Fkeys on all Classé remote controls issue the same infrared commands. This saves you from having to be sure you have grabbed the proper remote, since all your Classé remotes will perform the same function for each Fkey.

Image 32
Contents SSP-600 Surround Processor Page Important Safety Instructions Contents OSD Welcome to the Classé family Unpacking and Placement Placement Ventilation Custom installations Serial numberWarm up/break-in period Please read this manual… Operating Voltage Word About Installation THX Ultra Special Design FeaturesTranscoding Page THX Ultra 2 Music Mode THX Ultra 2 Cinema Mode Boundary Gain Compensation flexible GUIExtraordinary longevity Connect your source components to the SSP-600 Initial SetupConnect your SSP-600 to your power amplifiers Special Note for Subwoofer Please take a moment to read the rest of this manual Standby button & LED indicator Flashing on power-up InitializationFront Panel StandbyMenu button LCD touchscreenMute button IR windowVolume Knob Rear Panel Composite Video Inputs Balanced Analog Audio InputComposite Video Outputs Video InputsOptical Digital Audio Output Balanced Main Analog Audio OutputsVideo Outputs Coaxial Digital Inputs Optical Digital Inputs10 AES/EBU Digital Input Classé can Bus Control PortsIR Input Main and Zone 12 RS-232 Control Port This port has two purposesDC Trigger Outputs Microphone InputAnalog Audio Inputs Analog Audio Outputs stereoComponent Video Inputs and Output 18 7.1 Channel Analog Audio InputSingle-ended Main Analog Audio Outputs AC Mains Power Switch AC Mains InputRemote Control Volume KeysBasic Functions Audio Processing KeysNavigation and Control Menu Keys F1/F2/F3/F4 keysUnderstanding Surround Sound How many channels? Matrix or discrete?Multichannel formats Post-processing possibilitiesName Description Using the SSP-600 Source selection Mode selectionVideo preview Controls System trims Zone control Position select System setup Menu SystemVolume setup RotaryPage Max volume Startup volume Mute setup Input setup Page Page Speaker setup Page Profiles Triggers setup Teach IRDisplay setup Brightness TimeoutImportant Note Temp. display VolumeLanguage Dolby/DTS setup Dolby Pro LogicDTS Neo6 Remote FkeysStatus Version info SensorsThere is no sound and the Standby LED is not lit TroubleshootingEverything appears to be on, but there is no sound IR remote control seems not to function Only one speaker seems to be playingThere is a hum coming out of the speakers There is a hum coming from the unitCare & Maintenance Specifications Distortion THD + noiseCrosstalk any input to any output Classé AudioDimensions Page Asia 852 2790 Email classe@bwgroup.hk