Unpacking and Placement

Classe Audio SSP-600 owner manual Unpacking and Placement

unpacking your surround processor

Important!

placement

ventilation

custom installations

serial number

Carefully unpack your surround processor according to the supplied instructions, and remove all accessories from the carton.

Keep all packing materials for future transport of your Classé product. Shipping your new component in anything other than its purpose-designed packing material may result in damage that is not covered by the warranty.

As with any surround processor, it is best to place the SSP-600 centrally within your system, since it is the hub to which all other components are connected. It should also be located at a convenient height for both visibility and use, since you generally interact with your surround processor more than any other component (changing inputs, adjusting volume, etc.).

Note that adequate clearance for the AC cord and connecting cables must be left behind the SSP-600. We suggest leaving eight inches (20 cm) of free space behind your surround processor to allow all cables sufﬁcient room to bend without crimping or undue strain.

Classé recommends that the unit not be placed directly on the top surface of a power ampliﬁer (or any other heat source).

Your Classé surround processor generates a certain amount of heat in the course of normal operation. Be sure to allow three inches of clearance above it and three inches to each side to allow heat dissipation through air circulation. Avoid placement on soft surfaces that would restrict airﬂow (such as plush carpeting).

Drawings are included in this manual to facilitate special installations and custom cabinetry (see the section Dimensions). An optional, purpose-designed rack mount kit is available for this product. Contact your Classé dealer for more information.

The serial number for your surround processor is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference.

Having found the serial number, now would be a good time to ﬁll out the registration card. Please register your purchase so we can advise you of updates and other items of interest.

It will take only a minute or so. Please complete the card now, before you forget.