Classe Audio SSP-600 owner manual DC Trigger Outputs, Microphone Input, Analog Audio Inputs

Page 28

28

14DC Trigger Outputs

Many audio/video components can supply a DC control voltage to associated equipment in order to induce desired behavior.

Two 1/8th-inch mono mini-jacksprovide individually controllable DC trigger outputs which can be used for any of a number of purposes, as described in The Menu System. For example, your dealer can program Trigger Out1 to toggle your Classé power amplifier between operate and standby with your SSP-600.

The trigger outputs will create a 12Vdc signal that can support up to 100mA of current.

15Microphone Input

The MIC input on the rear of the SSP-600 is used during auto-calibration of the system.

For a quick setup, connect the supplied microphone to this input and follow the procedure outlined in the Initial Setup section of this manual.

For more details, please refer to The Menu System, later in this manual.

16Analog Audio Inputs

These RCA jacks accept right-channel and left-channel (single-ended) inputs from line-level source equipment such as tuners, CD players, and tape decks. Any of these inputs may be selected by touching the corresponding button on the main operational screen of the front panel touchscreen.

To achieve the best possible results, we suggest that you use only high- quality shielded interconnect cables. Please consult with your local Classé dealer for advice on the best cables for use in your system.

17Analog Audio Outputs (stereo)

Four pairs of stereo analog outputs are provided on the SSP-600.

REC1, REC2 and REC3 support various recording devices (both the audio portion of an A/V recorder such as a VCR or a DVR, as well as audio-only recorders such as CD-R burners).

The ZONE output supplies an independently selectable audio signal to a remote zone within your home, regardless of what is being listened to in the main system. If you find this idea interesting, we suggest you speak with your authorized Classé dealer about multi-zone system designs for your home.

Image 28
Contents SSP-600 Surround Processor Page Important Safety Instructions Contents OSD Welcome to the Classé family Unpacking and Placement Placement Ventilation Custom installations Serial numberWarm up/break-in period Please read this manual… Operating Voltage Word About Installation Transcoding Special Design FeaturesTHX Ultra Page THX Ultra 2 Music Mode THX Ultra 2 Cinema Mode Boundary Gain Compensation flexible GUIExtraordinary longevity Connect your SSP-600 to your power amplifiers Initial SetupConnect your source components to the SSP-600 Special Note for Subwoofer Please take a moment to read the rest of this manual Standby button & LED indicator Flashing on power-up InitializationFront Panel StandbyMenu button LCD touchscreenMute button IR windowVolume Knob Rear Panel Composite Video Inputs Balanced Analog Audio InputComposite Video Outputs Video InputsVideo Outputs Balanced Main Analog Audio OutputsOptical Digital Audio Output Coaxial Digital Inputs Optical Digital Inputs10 AES/EBU Digital Input Classé can Bus Control PortsIR Input Main and Zone 12 RS-232 Control Port This port has two purposesDC Trigger Outputs Microphone InputAnalog Audio Inputs Analog Audio Outputs stereoSingle-ended Main Analog Audio Outputs 18 7.1 Channel Analog Audio InputComponent Video Inputs and Output AC Mains Power Switch AC Mains InputRemote Control Volume KeysBasic Functions Audio Processing KeysNavigation and Control Menu Keys F1/F2/F3/F4 keysUnderstanding Surround Sound How many channels? Matrix or discrete?Multichannel formats Post-processing possibilitiesName Description Using the SSP-600 Source selection Mode selectionVideo preview Controls System trims Zone control Position select System setup Menu SystemVolume setup RotaryPage Max volume Startup volume Mute setup Input setup Page Page Speaker setup Page Profiles Triggers setup Teach IRDisplay setup Brightness TimeoutLanguage Temp. display VolumeImportant Note Dolby/DTS setup Dolby Pro LogicDTS Neo6 Remote FkeysStatus Version info SensorsEverything appears to be on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit IR remote control seems not to function Only one speaker seems to be playingThere is a hum coming out of the speakers There is a hum coming from the unitCare & Maintenance Specifications Distortion THD + noiseCrosstalk any input to any output Classé AudioDimensions Page Asia 852 2790 Email classe@bwgroup.hk