MTD OGST-3106 manual Your Responsibility, Maintenance And Storage

Page 4

6.Do not operate machine while under the influence of alcohol or drugs.

7.Muffler and engine become hot and can cause a burn. Do not touch.

8.Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic.

9.Exercise caution when changing direction and while operating on slopes.

10.Plan your snow throwing pattern to avoid discharge towards windows, walls, cars etc. To avoid property damage or personal injury caused by a ricochet.

11.Never direct discharge at children, bystanders and pets or allow anyone in front of the machine.

12.Do not overload machine capacity by attempting to clear snow at too fast of a rate.

13.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

14.Disengage power to the auger/impeller when transporting or not in use.

15.Never operate machine at high transport speeds on slippery surfaces. Look down and behind and use care when in reverse.

16.If the machine should start to vibrate abnormally, stop the engine, disconnect the spark plug and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating.

17.Disengage the control handle and stop engine before you leave the operating position (behind the handles). Wait until the auger comes to a complete stop before unclogging the discharge chute, making any adjustments, or inspections.

18.Never put your hand in the discharge or collector openings. Always use a clearing tool to unclog the discharge opening.

19.Use only attachments and accessories approved by the manufacturer.

20.If situations occur which are not covered in this manual, use care and good judgment. Call customer assistance for the name of your nearest servicing dealer.

Maintenance And Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Disengage the control handle and stop engine. Wait until the auger/impeller come to a complete stop. Disconnect the spark plug wire and ground against the engine to prevent unintended starting before cleaning, repairing, or inspecting.

3.Check bolts, and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

4.Do not change the engine governor setting or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer’s (O.E.M.) parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

6.Check controls periodically to verify they engage and disengage properly and adjust, if necessary. Refer to the adjustment section in this operator’s manual for instructions.

7.Maintain or replace safety and instruction labels, as necessary.

8.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

9.Prior to storing, run machine a few minutes to clear snow from machine and prevent freeze up of auger/impeller.

10.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

11.Always refer to the operator’s manual for proper instructions on off-season storage.

Your Responsibility:

•Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

DANGER

DANGER

NEVER PUT HAND IN CHUTE. CAN

AMPUTATE HANDS AND FINGERS.

STOP ENGINE AND AUGER BEFORE USING

CLEAN-OUT TOOL OR STICK.

NE PLACEZ JAMAIS VOS MAINS DANS LA

GOULOTTE. LES PIÈCES EN MOUVEMENT

PEUVENT AMPUTER MAINS ET DOIGTS.

ARRÊTEZ LE MOTEUR ET LA TARIÈRE AVANT

D'UTILISER L'OUTIL DE DÉGAGEMENT

DE LA GOULOTTE OU UN BÂTON.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance And Storage Your ResponsibilityItems Required For Assembly Before Assembly Assembling HandleAssembling Your Snow Thrower Loose PartsAttaching the Chute Assembly Attaching Chute CrankChute Clean-Out Tool Final AdjustmentsWheel Drive Control & Shift Lever Auger ControlTire Pressure Pneumatic Tires Knowing Your Snow ThrowerDrive Control / Auger Control Lock Safety Ignition Key Chute Clean-Out ToolShift Lever Discharge ChuteOperating Your Snow Thrower Before StartingGas & Oil Fill-Up To Start EngineTo Engage Augers To Engage Wheel DriveOperating Tips Chute Assembly Shift RodAuger Control Wheel Drive ControlMaintaining Your Snow Thrower Skid ShoeGeneral Recommendations LubricationFriction Wheel Rubber Drive BeltsEngine Wheel Drive Control / Auger Control LockServicing Your Snow Thrower Augers Replacing BeltsShave Plate and Skid Shoes Auger BeltDrive Belt Changing Friction Wheel Rubber Sprocket Hex ShaftTroubleshooting OFF-SEASON StorageThree 3 Year Limited Warranty Tractor Attachment Warranty103 Part RÉF Pièce Description Serrez à un couple de 20-30 po-lb Part RÉF Pièce Description RÉF Pièce Description 20 19 3468 58A 58B Part RÉF Pièce Description 995 x 12,0 Lg po Couple de 325-550 po-lb Style Style Commerciale Utilisation Dépannage DE Guide 9 Chapitre UregFi Nongpi du Hex Moyeu Arbre NongPiFrottement de roue Caoutchouc en bague la de ChangementGoulotte La de manivelle la et courroie-couvre le RemontezCourroies les de Remplacement Patins et Lame TarièresMoteur ’entraînement CourroiesGénéral d’ordre Recommandations LubrificationPatin Tarière la de Commande’éjection Goulotte La de commande la de réglage tout pour réglages» Roues des l’entraînement de CommandeGoulotte la de et patins des tarière Tarières les de Embrayage ’utilisation ConseilsLaissez Remarque Démarrage le Avant ’huile et d’essence PleinsTrous trois à courant de prise une avez vous Si Vitesses de Levier Que plus côté d’un tirer de risque machine la pneus, les ’autre deTous dans égale pas n’est pression la Si Remarque Le dans roues» des l’entraînement de «Commande Réglages DerniersGoulotte la de dégagement de Outil La à «Réglages» chapitreGoulotte la de Montage Goulotte la de manivelle la de MontageExcessivement Cisaillement de Boulons Montage 2 ChapitreSouffleuse la de châssis le de l’arrière à Regardez Responsabilité Votre Remisage ET Entretien Préparation FormationEgl’assembla Procéder de Avant EgPa Contenu’utilisation Notice

OGST-3106 specifications

The MTD OGST-3106 is an innovative and versatile outdoor gas-powered string trimmer designed to meet the demands of both professional landscapers and passionate gardeners. This robust machine combines power, efficiency, and ease of use, making it a top choice for managing grass, weeds, and other vegetation.

One of the standout features of the MTD OGST-3106 is its powerful 31cc 2-cycle engine. This engine is engineered to deliver exceptional performance, allowing users to tackle thick underbrush and heavy grass with ease. The engine is designed for optimal fuel efficiency, reducing the need for frequent refueling during larger jobs. In addition to power, the lightweight design of the trimmer ensures that users can maneuver it effortlessly, reducing fatigue even during prolonged use.

The MTD OGST-3106 incorporates a straight shaft design, which provides extended reach for accessing hard-to-reach areas such as under decks or along fences. This feature enhances its versatility, making it suitable for a variety of applications, from trimming along sidewalks to edging flower beds. Moreover, the unit is equipped with a dual-line cutting head that allows for increased cutting width and efficiency, ensuring a cleaner and faster job.

Another key characteristic of the MTD OGST-3106 is its easy-start technology. The trimmer features user-friendly starting mechanisms that make it simple to get the engine running, even for those who may not have extensive experience with gas-powered equipment. This eliminates some of the common hassles associated with starting similar machines, making it accessible to users of all skill levels.

Durability is a hallmark of the MTD OGST-3106, constructed with high-quality materials that withstand the rigors of outdoor use. Its robust build ensures longevity and reliability over time, even when facing tough environmental conditions. The trimmer also includes ergonomic grips that enhance comfort and control, enabling users to work efficiently while minimizing strain on their hands and wrists.

In conclusion, the MTD OGST-3106 is a powerful and user-friendly gas string trimmer that combines advanced technology with practical features. It is ideal for anyone looking to maintain their outdoor space effectively. Whether you are a professional landscaper or a DIY enthusiast, the MTD OGST-3106 is designed to help you achieve professional-quality results with ease and efficiency. Its blend of power, durability, and ergonomic design sets it apart in the competitive market of outdoor power equipment.
Top Page Image Contents