Simplicity OSHK80, HMSK110, HMSK80 manual Engine & Frame Group 8HP, Electric Start

Engine & Frame Group - 8HP, Electric Start

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986095

Position idler pulley (Ref. 34) at	3
center of slot in clutch arm (Ref. 31).

1	Use 0-2
	washers
	between
	Ref. 58 & 31
	to assure a
	centered
	belt and no
	interference
	between			4
	pulleys Ref.			35
	27 & 34.	34	57

	58
	57
	57
28	30
2
32	36
31	33
27	29

30
	24
28
25
23
26
21	22
	21
	20

	Hook one end of spring (Ref. 24)
	into top hole of idler arm (Ref. 25)
	and other end into top hole of the
Long hub of idler pulley	pilot arm assembly in the Traction
(Ref. 27) to be toward	Drive Group.
idler arm (Ref. 25).

Secure engine lead
wire for headlight to		51	50
oil filler tube.
		52
	54	53
55
				56
		47	46	45
Torque to		48
		49
10 - 12 ft. lbs.

42

44	43	21
		21	42
Position belt stop (Ref. 42)
		43
1/16 to 1/8 inch from belt		44
when auger clutch is
engaged.

59
	Hook one end of spring
5	(Ref. 36) over clutch rod
	assembly (Ref. 31)
6
	between tabs and other
	end into slot in frame.

	8
	9
7	11

10

12

13

14

15

16

17

19

18

37

38

40

41	39
	Right rear bolt

The above parts group applies to the following Mfg. Nos.:

1694241 860DLXE, 8HP Electric Start

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. 26 TP 400-2307-03-LW-S