Troy-Bilt 769-03800 Making Adjustments, Shift Cable, Drive Control, Chute Assembly optional

Page 12



Making

Adjustments

WARNING

Read, understand, and follow all instruc- tions and warnings on the machine and in this manual before operating.

Never attempt to make any adjust- ments while the engine is running, except where speci- fied in operator’s manual.

Auger Control

Refer to Auger Control Test on Page 11 to adjust the auger control.

Shift Cable

If the full range of speeds (forward and reverse) cannot be achieved, refer to the figures to the right and adjust the shift cable as follows:

1.Place the shift lever in the fastest forward speed position.

2.Loosen the hex nut on the shift cable index bracket. See Figure 5-3.

3.Pivot the bracket downward to take up slack in the cable.

4.Retighten the hex nut.

Drive Control

When the drive control is released and in the disen- gaged “up” position, the cable should have very little slack. It should NOT be tight.

Check the adjustment of the drive control as follows:

1.With the drive control released, push the snow thrower gently forward. The unit should roll freely.

2.Engage the drive control and gently attempt to push the snow thrower forward. The wheels should not turn. The unit should not roll freely.

3.With the drive control released, move the shift lever back and forth between the R2 position and the F6 position several times. There should be no resistance in the shift lever.

4.If any of the above tests failed, the drive cable is in need of adjustment. Proceed as follows:

5.Loosen the lower hex nut on the drive cable bracket. See Figure 5-4.

6.Position the bracket upward to provide more slack (or downward to increase cable tension).

7.Retighten the lower hex nut.

Chute Assembly (optional)

The distance snow is thrown can be adjusted by chang- ing the angle of the chute assembly. To do so:

1.Stop the engine by removing the ignition key and loosen the plastic wing knob found on the left side of the chute assembly.

2.Pivot the chute upward or downward before retight- ening the wing knob. See Figure 5-5.

Figure -3

Figure -4

Figure -

1

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Two-Stage Snow Thrower Box 1386, KITCHENER, Ontario N2G 4J1Table of Contents Finding and Recording Model NumberCustomer Support Safety Labels Your Responsibility Restrict the useSafe Operation Practices TrainingPreparation Your ResponsibilityMaintenance & Storage OperationDo not modify engine Average Useful LifeSetting Up Your Snow Thrower Clean-Out Tool HousingLamp Wiring Harness If equipped Ice from the chuteOperating Your Snow Thrower Know Your Snow Thrower$26% #/.42 Gas & Oil Fill-Up Stopping The EngineElectric Starter on certain models To Engage Drive To Engage AugersRecoil Starter Auger Control TestMaking Adjustments Chute Assembly optionalShift Cable Drive ControlChute Bracket Adjustment Tire PressureProperty Maintaining Your Snow Thrower EngineLubrication Shave Plate and Skid ShoesAuger Belt Replacement Unhook the support bracket spring from the frameDrive Belt Replacement Friction Wheel Removal Off-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting Problem Cause RemedyWarranty Four Year Supreme WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Manual Chute Control Part Description RÉF Pièce Optional/en option Part Description RÉF Pièce 30 in/po Part Description RÉF Pièce 31AE6GKF500 Part For parts and/or accessories refer to customer support on For parts and/or accessories refer to customer support on Page Garantie FrottementSolution Causes Problème DépannagePropre et Carburant le Videz Gaz’entretien Régime De courroie la de Remplacement TransmissionTarières ’entretien RégimePatins et plate Lame LubrificationMoteur Réglages GoulotteLa de support du Ajustement PatinsTransmission la de Commande Option en GoulotteVitesses de changement de Câble Avertissement Lanceur à Démarreur’huile et d’essence Pleins Modèles certains sur électrique DémarreurModèles Certains sur électrique DémarreurGou la de direction de Commande Goulotte la de CommandeTrans de commande la de Blocage Tarière la de CommandeSouffleuse la de Commandes ’huile PleinPhare du câblage de Faisceau Échéant cas le coupe de BarresDégagement De OutilGoulotte la de dégagement de Outil Goulotte la dégager De d’essayer avant immobilisées soientSe pièces les toutes que ce jusqu’à Guidon le derrière restez et moteur leRemisage et Entretien Responsabilité VotreMoyenne utile vie de Durée Gaz de émissions les concernant AvisUtilisation PréparationFormation Responsabilité VotreSécurité de Étiquettes Est goulotte la de dégagement de outil UnVente-après Service Modèle de numéro le trouver PourMatières des Table Phases deux neige à Souffleuse Ca.troybilt.www

769-03800 specifications

The Troy-Bilt 769-03800 is a powerful and reliable rear-tine tiller designed to cater to both gardening enthusiasts and professional landscapers. Known for its durability and efficiency, this tiller boasts a robust design that makes it suitable for a variety of soil types, allowing users to prepare their garden beds with ease.

One of the standout features of the Troy-Bilt 769-03800 is its strong 14-inch steel tines, which are capable of slicing through hard-packed earth and clay with minimal effort. The tiller is equipped with a sizable 196cc engine that provides adequate power for tilling deeper and larger areas, ensuring that you can accomplish your gardening tasks quickly. The rear-tine configuration also means that the tiller can maneuver smoothly forward while the tines work through the soil, making the tilling process more efficient.

Another significant characteristic of this tiller is its adjustable tilling width. Users can choose between a range of widths from 16 inches to 24 inches, allowing for flexibility based on the specific needs of their garden or landscaping project. This feature enhances versatility, whether you are tackling narrow rows or wide garden plots.

The Troy-Bilt 769-03800 has a user-friendly control system, featuring an adjustable handlebar that accommodates various user heights and ensures comfort during operation. This ergonomic design reduces fatigue, making it easier to manage larger tilling projects.

In addition to its powerful performance, the tiller incorporates innovative technologies such as the patented "Bolo Tines," which are specially designed to break up soil more efficiently. This feature helps reduce the time and effort required for tilling, allowing users to achieve better results with less strain.

Safety is paramount with the Troy-Bilt 769-03800, as it includes features like a safety switch that ensures the engine can only be started when the user is ready. This prevents accidental starts and enhances overall user protection while operating the machine.

Overall, the Troy-Bilt 769-03800 is a versatile and robust tiller that combines power, efficiency, and user-friendly features. Whether you're a dedicated gardener or manage a larger landscape project, its reliable performance and innovative design make it a highly sought-after tool in the gardening community. For those looking to enhance their gardening experience, the Troy-Bilt 769-03800 is a worthwhile investment that promises to deliver exceptional results year after year.
Top Page Image Contents