Cub Cadet SWE 528 warranty Auger Belt, Roll auger belt off the pulley as shown in Figure

Page 16

Maintaining

Your Snow

Thrower

Figure 23

Auger Belt

1.Roll auger belt off the pulley as shown in Figure 23.

2.a. Turn the shoulder screw a half a turn and slide it out of the mounting bracket. See Figure 24.

b.Unhook spring to release tension on the auger belt. See Figure 24.

3.Remove old belt and replace with new belt wrapping it around the auger pulley. See Figure 25.

4.Re-insert shoulder screw into the mounting bracket and tighten to secure.

5.Wrap auger belt behind the idler. Reattach the spring to the bolt where it was earlier secured.

6.Re-install frame cover and flip the snow thrower back to the operating position.

7.Re-install auger belt around the engine pulley.

8.Re-install belt cover with the self-tapping screws removed earlier.

WARNING

Always stop engine, disconnect spark plug, and ground against engine before performing any type of maintenance on your machine.

Figure 24

Figure 25

Image 16

Contents Form no -01791A Two-Stage Snow Thrower Model SWE06/02/2006 Finding and Recording Model Number Table of ContentsCustomer Support Chute clean-out tool is fastened to the top Your Responsibility53% %842! #!54/ %. /0%2!4 %, 352&!#%3Practices Your Responsibility Restrict the useDo not modify engine Your ResponsibilitySetting Up Your Snow Thrower Tighten hand knobs securing upper handle to lower handleShear Pin Storage Chute Clean-Out ToolTire Pressure Operating Your Snow Thrower Know Your Snow ThrowerOperating Your Snow ThrowerGas & Oil Fill-Up Stopping The EngineStarting The Engine Electric StarterTo Engage Augers To Engage DriveAuger Control Test Making Adjustments Shift CableChute Control Drive Control Shift LeverSkid Shoes Auger ControlMaintaining Your Snow Thrower General RecommendationsEngine LubricationShave Plate and Skid Shoes Replacing BeltReplacing Skid Shoe Replacing Shave PlateAuger Belt Roll auger belt off the pulley as shown in FigureFriction Wheel Rubber Drive BeltWheel and friction wheel disc. See Figure Off-Season Storage Preparing EnginePreparing Snow Thrower Short-Term StorageThis section Addresses minor Service issues Trouble- shootingPage Parts List To order replacementOr visit Parts, call the Customer Dealer Referral Line at 738-04194 Flange Shoulder Screw Lock PlateClutch Lock Cam Shoulder Nut, 1/4-2055 56 Friction Wheel Disc Assembly AB Screw, 1/4-20 x790-00096 Auger Cable Guide Bracket 748-0190 Spacer 790-00226 Frame CoverPage U.S.A Canada Contact MTD Products Limited, Kitchener, on N2G 4J1, or callMANUFACTURER’S Limited Warranty for

SWE 528 specifications

The Cub Cadet SWE 528 is a powerful and versatile snow blower designed for homeowners who demand efficiency and reliability during winter months. This model is notable for its robust performance and innovative features that make snow removal an easier and more streamlined task.

One of the standout characteristics of the SWE 528 is its 28-inch clearing width, allowing users to clear large areas of snow in a single pass. The machine is powered by a dependable 420cc OHV engine, delivering ample power and torque to tackle even the most stubborn snow. The engine's design ensures smooth operation, providing the strength needed to clear heavy, wet snow and dealing effortlessly with snowdrifts.

The SWE 528 features a heavy-duty steel auger that efficiently breaks up and gathers snow, sending it through an impressive 200-degree adjustable chute. This pivotal chute design allows for precise control over the direction of snow disbursement, giving users the ability to decide where to send the snow, whether it's onto a driveway, yard, or away from pathways.

Another notable technology in the SWE 528 is its electric start function, which provides a hassle-free way to fire up the engine regardless of the cold weather conditions. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms in frigid temperatures. Moreover, the model includes a reliable 6-speed transmission that features both forward and reverse settings, allowing for greater mobility and control when navigating various terrains and snow depths.

Comfort is also a key focus in the design of the Cub Cadet SWE 528. It comes equipped with ergonomically designed handles, which provide a comfortable grip and reduce user fatigue during extended use. Additionally, the heated hand grips keep hands warm while operating the snow blower in the coldest conditions, making it an excellent choice for winter storms.

The SWE 528 is built to withstand the elements with its durable construction, featuring a rust-resistant finish and high-impact components that are made to endure harsh winter conditions. Overall, the Cub Cadet SWE 528 combines power, convenience, and durability, making it an excellent investment for anyone looking to simplify their winter snow management tasks. Its impressive features and user-friendly design set it apart in the competitive snow blower market, delivering performance that meets the needs of homeowners in snowy climates.