All Installations, Toutes installations

Installation Instructions (cont.)

All Installations

1.Strip 1/2-inch (13mm) of insula- tion from the wire, and twist the wire strands together. The VRi speaker jack will accept either bare wire up to 12-gauge, or sin- gle banana plugs.

2.Connect the wire to the speaker.

3.Slide the speaker into the cutout as shown.

•The VRi560 and VRi580 must slide into the wall woofer side first.

•The VRi553 and VRi593 slide into the wall long side first.

4.Tighten the Phillips mounting screws.

Instrucciones de montaje (cont.)

Todas las instalaciones

1.Pele 13mm del aislante del cable y retuerza el extremo para agrupar los hilos. El conector del altavoz VRi aceptará tanto cable desnudo de calibre 12 como con clavijas sencillas tipo banana.

2.Conecte el cable al altavoz.

3.Introduzca el altavoz en el agujero como se indica.

•Los VRi560 y VRi580 deben introducirse primero en la pared del “lado del woofer”.

•Los VRi553 y VRi593 deben introducirse primero en la pared del “lado largo”.

4.Apriete los tornillos tipo estrella de montaje.

Instructions d’installation (suite)

Toutes installations

1.Dénudez 13 mm de câble, et torsadez les fils souples ensemble. La fiche de l’enceinte VRi accepte les câbles dénudés d’un diamètre maximum de 12, ou les fiches bananes simples.

2.Connectez le câble à l’enceinte.

3.Introduisez l’enceinte dans l’orifice découpé comme illustré ci-dessous.

•Les enceintes VRi560 et VRi580 doivent être introduites dans le mur « côté woofer » en premier.

•Les enceintes VRi553 et VRi593 doivent être introduites dans le mur « côté long » en premier.

4. Revissez les vis de fixation.

Installationsanweisungen (Forts.)

Alle Installationen

1.13 mm Isolierung vom Kabel entmanteln, und die Drahtlitzen zusammendrehen. Der VRi- Lautsprecheranschluss nimmt entweder blanken Draht bis zu AWG 12 oder einfache Gabelschuhstecker auf.

2.Das Kabel an den Lautsprecher anschließen.

3.Den Lautsprecher - wie abge- bildet - in den Ausschnitt schieben.

•Die Modelle VRi560 und VRi580 müssen mit der „Woofer“-Seite zuerst in die Wand geschoben werden.

•Die Modelle VRi553 und VRi593 müssen mit der „lan- gen“ Seite zuerst in die Wand geschoben werden.

4.Die Kreuzschlitz-Befestigungs- schrauben festziehen.

Important: Do not over tighten the screws.

If you wish to paint your speakers or grilles it should be done prior to installation of the grille. Please see the Painting instructions.

Importante: no apriete demasiado los tornillos.

Si quiere pintar los altavoces o las rejillas deberá hacerlo antes de la instalación de la rejilla. Consulte las instrucciones para pintarlos.

Important : Ne resserrez pas les vis excessivement.

Si vous voulez peindre les enceintes ou les grilles, faites-le avant l’installation des grilles. Veuillez consulter les instructions de peinture qui suivent.

Wichtig: Die Schrauben nicht zu fest anziehen.

Wenn die Lautsprecher oder Ziergitter lackiert werden sollen, muss dies vor der Installation des Ziergitters geschehen (siehe Anweisungen zum Lackieren).

– 13 –

VRi553, VRi560, VRi580, VRi593 specifications

Boston Acoustics has long been recognized for its commitment to high-quality audio engineering, and their VRi series of in-wall speakers epitomizes that dedication. Among the standout models in this lineup are the VRi560, VRi580, VRi553, and VRi593. Each speaker is designed to deliver exceptional sound performance while offering a sleek, unobtrusive aesthetic that seamlessly integrates into any home environment.

The VRi560 is a robust 6.5-inch in-wall speaker that boasts a patented Boston Acoustics technology designed for optimal sound dispersion. Equipped with a proprietary 6.5-inch woofer and a 1-inch tweeter, this model provides deep bass response and clear highs, making it ideal for both music and home theater applications. The speaker features a paintable grille, allowing homeowners to customize the look to match their décor.

Stepping up, the VRi580 offers an enhanced audio experience with dual 6.5-inch woofers and a 1-inch tweeter. This configuration allows for a wider soundstage and richer low-frequency output. The VRi580 also incorporates Boston's advanced tuning technology, enabling flexible placement that adapts to any listening environment. The speaker’s dual woofers work in tandem to create an immersive surround sound experience, making it a great choice for cinema enthusiasts.

For those seeking a more compact solution, the VRi553 is a 5.25-inch in-wall speaker that doesn't compromise on sound quality. Using a 5.25-inch woofer and a 1-inch tweeter, the VRi553 is designed for smaller spaces but still delivers a full and balanced sound profile. This model is particularly suited for secondary audio zones or smaller rooms where space is at a premium, ensuring that every ounce of sound quality is retained.

Lastly, the VRi593 rounds out the series with a unique design featuring a robust 9-inch woofer alongside a 1-inch tweeter. This model is engineered to produce deep, impactful bass while maintaining clarity in the upper frequencies. The VRi593's advanced bass response makes it a perfect addition to larger rooms or as part of a robust home theater system.

All models in the VRi series come with Boston Acoustics’ innovative mounting system, designed for easy installation. The speakers also feature a slim profile, making them virtually invisible in the wall. Whether you’re looking to upgrade your home audio or establish a high-powered sound system, the Boston Acoustics VRi series delivers exceptional performance and unmistakable style. With advanced technologies and thoughtful design, these in-wall speakers exemplify the brand's commitment to quality and user experience.