Operation, Controls and Features | Ariens 924122 1124, 924118 8524

1
2	3
1. Cable Eye
2. Flat Washer and E-Ring
3. Deflector Cable
Figure 8	OS1981

Check Function of Dual Handle Interlock

Without the engine running, press down (engage) both clutch levers. Release attachment clutch lever. Attachment clutch should remain engaged until traction clutch lever is released, then both clutches must disengage. If they do not, contact your dealer for repairs.

Check Tire Pressure

Check tire pressure and adjust to the pressure listed on tire sidewall.

Check Auger Gearcase Oil

Check oil level in auger gearcase (see Service

and Adjustments).

Check Engine Crankcase Oil

IMPORTANT: The engine is shipped with 5W-30 oil in crankcase. Refer to Engine Manual for detailed instructions.

Fill Engine Fuel Tank

Refer to Engine Manual for proper fuel type and tank capacity.

Check Function of all Controls

Ensure unit runs and performs properly. Refer

to Operation.

Run-in Attachment Belt

1.Start unit in a well-ventilated area according to Starting and Shut-Offin Operation.

2.Engage attachment clutch lever and run attachment for about 15 minutes.

3.Stop unit, wait for all moving parts to stop, and remove spark plug wire.

4.Adjust clutch according to Attachment Clutch/Brake Adjustment in Service and Adjustments.

OPERATION

WARNING: AVOID INJURY. Read and understand the entire Safety

Traction Drive Clutch - Left Hand Lever

section before proceeding.

WARNING: To avoid injury to hands and feet, always disengage clutches, shut off engine, and wait for all movement to stop before unclogging or working on snow thrower.

Keep hands and feet away from auger and impeller.

OL2701

Squeeze the Traction Drive Clutch Lever against the Handlebar

(1)to engage wheel

drive for propelling unit. Forward speed will vary according to snow depth and moisture content.

Release lever (2) to stop movement.

CONTROLS AND FEATURES

See Figure 1 for all Controls and Features locations.

Dual Handle Interlock

When Attachment Clutch and then Traction Drive Clutch are engaged, the Attachment Clutch will remain engaged (lever down) if released. To stop attachment, release Traction Drive Clutch and both clutches will disengage.

NOTE: When traveling to or from the area to be cleared, press down on the handlebars enough to raise the front of the unit slightly off the surface. Engage the traction drive clutch without engaging the attachment drive clutch.

GB - 14

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.