Ariens 924118 8524 manual Attachment Clutch Right Hand Lever, Speed Selector, Throttle Primer Bulb

Page 15

Attachment Clutch - Right Hand Lever

Squeeze Attachment

2

Clutch Lever against

 

Speed Selector

The Speed Selector controls the unit travel in a forward or reverse direction when positioned

handlebar (1) to engage

 

attachment. Release

 

both clutch levers (2) to

 

disengage power and

1

apply brake to

attachment.

 

IMPORTANT: If the belt

OL2691

squeals when the

attachment clutch lever

 

 

 

is engaged, the

attachment drive may be frozen. Immediately release the attachment clutch lever and move the unit into a heated area to thaw.

Ignition Switch (120V start on engine)

Key Switch has two positions:

1.“Stop” - pulled out

2.Run - pushed in

in notch of speed.

6

5

4

3

2

1

1

2

Forward:

(6)Fastest

(1)Slow Reverse:

(1)Slow

(2)Fast

IMPORTANT: DO NOT change motion from forward to reverse with clutch engaged. Forward speed can be changed without declutching.

2NOTE: DO NOT twist key after it is inserted.

1

OS1431

OS1191

Choke Control Knob

Ignition Switch (12V start on dash panel)

21

1.

Choke Closed position:

chokes off air to engine for

easier start.

2.

Choke Open position:

12

3

The ignition switch is operated by a removable key. It has three positions:

1.Stop

2.Run

OS1332

allows for normal

operation.

IMPORTANT: Gradually open choke after engine starts.

OS0232

3.Start

Throttle

Primer Bulb

Pushing the primer bulb in adds fuel for easier engine start. Refer to Starting and Shut Off.

OS1321

1

2

3

STOP 4

OL2720

The throttle controls the engine speed. To increase or decrease the engine speed, adjust to:

1.Fast (normal or warm starts)

2.Part-Throttle

3.Slow (cold weather starts)

4.Stop (engine is off)

Electric Starter

The electric starter will start a properly choked and cranked engine when the key is turned (12V) or starter button (120V) is pushed. Refer to Starting and Shut-Off.

Recoil Starter Handle

When pulled, handle will turn engine over.

IMPORTANT: DO NOT let handle snap back against starter.

GB - 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Sno-Thro USA Lydeffektnivå Garanterad ljudnivå English Français Español Controls and FeaturesOS0595 Introduction Table of ContentsSafety Rotating Parts Safety Decals LocationsSafety Rules Page Tools Required AssemblyHandlebar and Shift Rod Package ContentsAssembly Install Discharge Chute and CrankDeflector Remote 924121, 122, 332, 505, 506 Install Discharge Chute Electric Rotation 924505Connect Battery 924332, 505 508Operation Controls and FeaturesSpeed Selector Ignition Switch 120V start on engineChoke Control Knob Ignition Switch 12V start on dash panel Attachment Clutch Right Hand LeverDischarge Chute Chute Rotation Switch 924505Discharge Chute Deflector Deflector Remote 924121, 332, 505Filling Fuel Tank PRE-STARTTo Stop in AN Emergency Starting and Shut OFF Manual StartElectric Start Maintenance Maintenance Schedule General Lubrication Auger ShaftTerminals Discharge Chute Service and AdjustmentsDischarge Chute Deflector 924118 Deflector RemoteShear Bolts Speed Selector AdjustmentFor Replacement Scraper BladeFigures 18 Attachment CLUTCH/BRAKE AdjustmentDrive Chain Traction Drive Clutch AdjustmentReplacement Attachment Drive BeltRemove old attachment drive belt Traction Drive Belt Replacement Friction Disc ReplacementInstall new attachment drive belt Short Term Service PartsAccessories StorageTroubleshooting Specifications Year Limited Sno-Thro Warranty

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.
Top Page Image Contents