Ariens Comprehensive Guide to Adjustments for the 8524 Snowblower
Page 24

3

4

2

1

1.Shift Rod

2.Adjustment Pivot Pin

3.Speed Selector Lever

4.Hairpin

Figure 17

ATTACHMENT CLUTCH/BRAKE ADJUSTMENT

(Figures 18 and 19)

IMPORTANT: IMPROPER ADJUSTMENT could result in unexpected movement of auger and impeller causing death or serious injury. Auger / impeller must stop within 5 seconds when Attachment Clutch/Impeller Brake lever is released.

1.Remove belt cover.

2.Check belt alignment (Figure 21).

Engine sheave and attachment pulley must align vertically. Also, belt must be centered in the idler pulley.

To align, move attachment pulley:

a.Loosen set screws.

b.Slide pulley and key to desired position.

c.Tighten set screws.

3.Install belt cover.

4.Adjust cable slack.

IMPORTANT: The belt cover must be installed and the clutch cable must be slack when the lever is disengaged.

a.With clutch lever disengaged, loosen jam nut on cable adjuster.

b.Turn adjuster body to remove all slack from the cable. Do not stretch spring or move lower clutch arm.

c.Turn back the adjuster body 5 turns (approximately 1/4 in. or 6 mm). Finger tighten jam nut.

d.Hold adjuster body with pliers and tighten jam nut with wrench.

5.Check spring length.

a.Measure the length of the clutch cable spring.

b.Engage and hold the attachment clutch lever.

c.Measure the length of the spring again. The spring should be

7/16 –11/16 in. (11.1–17.5 mm) longer when the lever is engaged.

GB - 24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Sno-Thro USA Lydeffektnivå Garanterad ljudnivå Controls and Features English Français EspañolOS0595 Table of Contents IntroductionSafety Safety Decals Locations Rotating PartsSafety Rules Page Assembly Tools RequiredPackage Contents AssemblyInstall Discharge Chute and Crank Handlebar and Shift RodInstall Discharge Chute Electric Rotation 924505 Connect Battery 924332, 505508 Deflector Remote 924121, 122, 332, 505, 506Controls and Features OperationIgnition Switch 120V start on engine Choke Control Knob Ignition Switch 12V start on dash panelAttachment Clutch Right Hand Lever Speed SelectorChute Rotation Switch 924505 Discharge Chute DeflectorDeflector Remote 924121, 332, 505 Discharge ChuteFilling Fuel Tank PRE-STARTTo Stop in AN Emergency Starting and Shut OFF Manual StartElectric Start Maintenance Maintenance Schedule General Lubrication Auger ShaftTerminals Service and Adjustments Discharge Chute Deflector 924118Deflector Remote Discharge ChuteSpeed Selector Adjustment For ReplacementScraper Blade Shear BoltsAttachment CLUTCH/BRAKE Adjustment Figures 18Traction Drive Clutch Adjustment Drive ChainReplacement Attachment Drive BeltRemove old attachment drive belt Traction Drive Belt Replacement Friction Disc ReplacementInstall new attachment drive belt Service Parts AccessoriesStorage Short TermTroubleshooting Specifications Year Limited Sno-Thro Warranty

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.
Top Page Image Contents