Maintenance Schedule

Service	Each	Every	Every	Yearly
Performed	Use	5 hrs.	25
			hrs.

Check Dual	•
Handle
Interlock

Check	•
Fasteners

Check	•
Clutches

Clean Engine	•

Check Engine		•
Oil

Change		*	•
Engine Oil		*
Engine Oil

Check Tire			•
Pressure

Check Auger			•	•
Gearcase

General			•	•
Lubrication

Battery			•	•
Maintenance

*After first two hours of operation.

CHECK DUAL HANDLE

INTERLOCK

Without the engine running, press down (engage) both clutch levers. Release attachment clutch lever. Attachment clutch should remain engaged until traction clutch lever is released, then both clutches must disengage.

CHECK FASTENERS

Make sure all hardware is tightened properly.

CHECK CLUTCHES

Auger / impeller must stop within 5 seconds when attachment clutch/impeller brake lever is released.

Wheels must stop quickly when traction drive clutch lever is released.

If clutches do not engage or disengage properly, adjust or repair before operation (see Service and Adjustments).

CLEAN ENGINE

Refer to Engine Manual for detailed instructions.

CHECK ENGINE OIL

The engine crankcase oil should be checked every 5 hours of operation. Oil level MUST be maintained in safe operating range on dipstick at all times or engine damage will result (See Engine Manual).

Park unit on a level surface. Refer to Engine Manual for detailed instructions.

CHANGE ENGINE OIL

Change oil after first 2 hours of operation, thereafter change oil every 25 hours (more often if required). Refer to Engine Manual for detailed instructions.

Run engine just prior to changing oil. Warm oil will flow more freely and carry away more contamination.

CHECK TIRE PRESSURE

Keep tires at pressure listed on the tire sidewall.

CHECK AUGER GEARCASE

IMPORTANT: Proper oil level must be maintained.

Gear cases are filled to the correct level at the factory. Unless there is evidence of leakage, no additional lubricant should be required. Check oil level each season or every 25 hours of operation.

To ensure adequate lubricant level:

1.Remove filler plug (Figure 10). Lubricant must be at least up to bottom of lubricant filler hole with unit resting on a level-surface.

2.Add lubricant if required. Allow oil to drain to level of plug and replace plug.

IMPORTANT: Use only Ariens special gear lubricant L-2 (Part Number 00008000).

GB - 20

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.