Ariens 924332 1124 Service and Adjustments, Discharge Chute Deflector 924118, Deflector Remote

Page 22

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

DISCHARGE CHUTE DEFLECTOR (924118, 551)

Deflector must stay in selected position while throwing snow.

To adjust, loosen then retighten hardware to desired deflector drag force (Figure 12).

Adjusting Hardware

Discharge Chute

Deflector

Figure 12

OS0113

DEFLECTOR REMOTE (924121,

If deflector does not follow full range of travel:

1.Push deflector remote all the way forward.

2.Loosen adjusting nuts on cable support bracket.

3.To adjust the deflector lower:

Slide cable down. Tighten bottom nut.

4.To adjust deflector higher: Slide cable up. Tighten top nut.

5.Check travel and repeat adjustment as necessary.

DISCHARGE CHUTE

If chute does not stay in position while operating, tighten nut on carriage bolt at pivot point to increase tension on spring (Figure 14).

Smooth and easy rotation of properly lubricated chute with crank is obtained by adjusting pinion and chute gear teeth so they mesh together.

1

122, 332, 505, 506, 508)

Deflector must stay in selected position while throwing snow.

If deflector does not stay in set position:

1. Tighten nut beneath the control panel to

increase friction on pressure flange

2

3

4

1. Pinion

DS0113

(Figure 13).

4

3

1

OS0280

2

 

 

1. Nut

 

2. Pressure Flange

 

3. Adjusting Nuts

 

4. Cable Support Bracket

 

Figure 13

2. Chute Gear

3. Carriage Bolt

4. Spring

Figure 14

RUNNERS

Runners should be adjusted (Figure 15) as conditions require.

1.Position unit on a hard, flat, smooth level surface.

2.Adjust runners by inserting a spacer of desired thickness under center of scraper blade, loosen runner hardware, slide runners to flat surface. Allow 1/8 in.

(3 mm) between scraper blade and hard smooth surfaces. Allow 1-1/4 in. (30 mm) between scraper blade and uneven or gravel surfaces. Retighten hardware.

GB - 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Sno-Thro USA Lydeffektnivå Garanterad ljudnivå Controls and Features English Français EspañolOS0595 Table of Contents IntroductionSafety Safety Decals Locations Rotating PartsSafety Rules Page Assembly Tools RequiredInstall Discharge Chute and Crank Package ContentsAssembly Handlebar and Shift Rod508 Install Discharge Chute Electric Rotation 924505Connect Battery 924332, 505 Deflector Remote 924121, 122, 332, 505, 506Controls and Features OperationAttachment Clutch Right Hand Lever Ignition Switch 120V start on engineChoke Control Knob Ignition Switch 12V start on dash panel Speed SelectorDeflector Remote 924121, 332, 505 Chute Rotation Switch 924505Discharge Chute Deflector Discharge ChutePRE-START Filling Fuel TankTo Stop in AN Emergency Manual Start Starting and Shut OFFElectric Start Maintenance Maintenance Schedule Auger Shaft General LubricationTerminals Deflector Remote Service and AdjustmentsDischarge Chute Deflector 924118 Discharge ChuteScraper Blade Speed Selector AdjustmentFor Replacement Shear BoltsAttachment CLUTCH/BRAKE Adjustment Figures 18Traction Drive Clutch Adjustment Drive ChainAttachment Drive Belt ReplacementRemove old attachment drive belt Friction Disc Replacement Traction Drive Belt ReplacementInstall new attachment drive belt Storage Service PartsAccessories Short TermTroubleshooting Specifications Year Limited Sno-Thro Warranty

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.
Top Page Image Contents