Ariens 924551 8524, 924118 8524, 924332 1124 manual General Lubrication, Auger Shaft, Terminals

Page 21

1

2

3

2

1.Auger Gearcase - Cast Iron

2.Oil Fill and Drain Plug

3.Auger Gearcase - Aluminum

Figure 10

GENERAL LUBRICATION

IMPORTANT: Wipe each fitting clean before and after lubrication.

IMPORTANT: DO NOT allow grease or oil to get on friction disc, friction plate or belts.

NOTE: Apply Stens Mix Hi-Temp Grease or equivalent to the lubrication fittings. See Service Parts.

Sno-Thro should be lubricated (Figure 11) at beginning of season or every 25 operating hours.

Auger Shaft

NOTE: To grease auger shaft, remove shear bolt nuts, and shear bolts. Turn auger on shaft while applying grease at zerk fittings. Replace shear bolt per instructions in Service and Adjustments.

2

8

6

5

4

1

1

1

1

7

 

3

 

1. Auger and Shaft

5. Shift Lever Arm

 

2. Discharge Chute

6. Pinion Chain

 

3. Sprocket/Pinion

7. Hex Shaft

Grease Oil

Assembly

8. Shift Link

 

4. Axle Shaft

 

 

OS0641

OS0741

Figure 11

CLEAN BATTERY (924332, 505, 506, 508)

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

IMPORTANT: Battery is maintenance free. Do not tamper with or attempt to open battery. See Service and Adjustments for charging procedures.

Terminals

Keep battery and its terminals clean.

IMPORTANT: Remove battery from unit before cleaning.

Remove corrosion from battery terminals and cable connections with a wire brush, then wash with a weak baking soda solution.

After cleaning, apply a thin coat of grease or petroleum jelly to terminals and cable ends to retard corrosion.

GB - 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Sno-Thro USA Lydeffektnivå Garanterad ljudnivå English Français Español Controls and FeaturesOS0595 Introduction Table of ContentsSafety Rotating Parts Safety Decals LocationsSafety Rules Page Tools Required AssemblyAssembly Package ContentsInstall Discharge Chute and Crank Handlebar and Shift RodConnect Battery 924332, 505 Install Discharge Chute Electric Rotation 924505508 Deflector Remote 924121, 122, 332, 505, 506Operation Controls and FeaturesChoke Control Knob Ignition Switch 12V start on dash panel Ignition Switch 120V start on engineAttachment Clutch Right Hand Lever Speed SelectorDischarge Chute Deflector Chute Rotation Switch 924505Deflector Remote 924121, 332, 505 Discharge ChuteFilling Fuel Tank PRE-STARTTo Stop in AN Emergency Starting and Shut OFF Manual StartElectric Start Maintenance Maintenance Schedule General Lubrication Auger ShaftTerminals Discharge Chute Deflector 924118 Service and AdjustmentsDeflector Remote Discharge ChuteFor Replacement Speed Selector AdjustmentScraper Blade Shear BoltsFigures 18 Attachment CLUTCH/BRAKE AdjustmentDrive Chain Traction Drive Clutch AdjustmentReplacement Attachment Drive BeltRemove old attachment drive belt Traction Drive Belt Replacement Friction Disc ReplacementInstall new attachment drive belt Accessories Service PartsStorage Short TermTroubleshooting Specifications Year Limited Sno-Thro Warranty

924122 1124, 924121 1128, 924332 1124, 924551 8524, 924118 8524 specifications

Ariens offers a premium range of snow blowers designed to tackle even the toughest winter conditions effectively. Among their top models are the Ariens 924121 (1128), 924122 (1124), 924332 (1124), 924118 (8524), and 924551 (8524). Each of these powerful machines boasts unique features and cutting-edge technologies that cater to different user needs.

The Ariens 924121 (1128) features a robust 28-inch clearing width and is powered by a reliable 420cc Ariens AX engine. This model is built for heavy-duty snow removal, capable of tackling a snow depth of up to 16 inches. The dual-stage system efficiently breaks down dense snow and ice, ensuring a clean surface. Additionally, it comes with heated hand grips and an adjustable, steering control system that makes maneuvering the machine a breeze.

Similarly, the Ariens 924122 (1124) model is equipped to handle up to 12 inches of snowfall. With a 24-inch clearing width and a powerful engine, it delivers efficient and effective snow removal for medium to large driveways. Its adjustable skids allow users to customize the height of the blower to accommodate various surfaces, while the easy-to-use control panel ensures that users can operate the machine with ease.

The Ariens 924332 (1124) shares many features with the 924122, including a similar engine and clearing width. However, it's designed with added emphasis on heavy-duty construction and enhanced durability, catering more towards users who face extreme winter conditions consistently.

The Ariens 924118 (8524) and 924551 (8524) models prioritize versatility and user comfort. Both feature a 24-inch clearing width but are optimized for lighter snowfall conditions, making them suitable for residential neighborhoods that experience manageable snowfall levels. These models emphasize ease of use with their lightweight design and centralized controls, making them ideal for users of all skill levels.

Overall, Ariens' range of snow blowers is characterized by their powerful engines, user-friendly controls, and innovative features designed for efficiency, comfort, and durability. Whether battling heavy snowfall or clearing light flurries, these machines are engineered to ensure effective snow removal and enhanced user satisfaction, capping off an impressive product line that caters to various needs and preferences.
Top Page Image Contents