Maintenance Schedule

Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged.

DO NOT transport machine while engine is running.

MAINTENANCE

WARNING: AVOID INJURY. Read and understand Maintenance and Service/Fuel Safety Rules before proceeding.

SERVICE POSITION

Place unit on a ﬂat level surface. Before tipping unit up onto housing, remove enough fuel so no spills will occur. Tip unit forward onto front of Impeller housing for service. Assure unit is secure and will not tip over. Strap and clamp onto bench if needed.

The chart below shows the recommended maintenance schedule that should be performed on a regular basis. More frequent service may be required.

MAINTENANCE SCHEDULE

	Each	Every	Every	Yearly
	Use	5 hrs.	25 hrs.

Check	•
Fasteners

Check	•
Attachment
Clutch

Clean	•
Engine

Check		•
Engine Oil

Change		*	•
Engine Oil		*
Engine Oil

Check Tire			•
Pressure

Check Auger			•	•
Gearcase

General			•	•
Lubrication

*After ﬁrst two hours of operation.

CHECK FASTENERS

Make sure all hardware is tightened properly.

CHECK ATTACHMENT CLUTCH

Auger / impeller must stop within 3 seconds when attachment clutch bail is released or unit damage or serious injury may result.

If clutch does not engage or disengage properly, adjust or repair before operation (see Service and Adjustments).

CLEAN ENGINE

Refer to Engine Manual for detailed instructions.

CHECK ENGINE OIL

The engine crankcase oil should be checked every 5 hours of operation. Oil level MUST be maintained in safe operating range on dipstick at all times or engine damage will result (See Engine Manual).

Park unit on a level surface. Refer to Engine Manual for detailed instructions.

CHANGE ENGINE OIL

Change oil after ﬁrst two (2) hours of operation, thereafter change oil every 25 hours (more often if required). Refer to Engine Manual for detailed instructions.

NOTE: Sno-Thro has an oil drain cut-out on the left side of unit frame. Drain engine oil through this cut-out to prevent spills.

CHECK TIRE PRESSURE

Keep tires at pressure listed on the tire sidewall.

CHECK AUGER GEARCASE

IMPORTANT: Proper oil level must be maintained.

Gear cases are ﬁlled to the correct level at the factory. Unless there is evidence of leakage, no additional lubricant should be required. Check oil level each season or every 25 hours of operation.

GB - 16

932103 - 624, 932102 - 520, 932310 - 624 specifications

Ariens is a well-known brand in the outdoor power equipment industry, particularly recognized for its high-performance snow blowers. Among its notable models, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 stand out for their robust construction and innovative features designed to tackle harsh winter conditions.

The Ariens 932310 - 624 is engineered for heavy-duty snow removal with a 24-inch clearing width and a powerful 624cc engine. This model features a reliable Ariens Polar Engine that provides efficient power and ensures consistent performance even during the coldest months. The durable housing construction, combined with a heavy-duty steel frame, offers superior durability and stability, making it an ideal choice for homeowners and professionals alike.

The 932102 - 520 model, with its 20-inch clearing width, is designed for those who require a more compact yet powerful option. Equipped with a 520cc engine, it provides ample power for residential snow removal tasks. This model includes Ariens' patented Auto-Turn technology, allowing for easy maneuverability around trees, mailboxes, and sidewalks. The lightweight, compact design enables storage in smaller spaces, making it suitable for urban environments.

On the other hand, the Ariens 932103 - 624 combines the best features of performance and versatility. With a larger 24-inch clearing width and a powerful 624cc engine, this model excels in clearing heavy snowfall. It also includes features like adjustable chute control, allowing users to direct snow where they want it to go with minimal effort. The heavy-duty tires provide excellent traction, necessary for navigating slippery driveways and pathways.

All three models come equipped with essential safety features, including an ignition switch and safety key to prevent accidental starts. Their ergonomic handlebars and controls are designed for comfort, ensuring ease of use regardless of the operator's experience level. Additionally, each model boasts a two-stage snow removal system that efficiently manages heavy snow, ensuring effective clearing with every pass.

In summary, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 models bring together powerful engines, durable construction, and advanced technology to provide effective snow removal solutions. They cater to different needs and preferences, making them versatile choices for anyone looking to combat snow build-up efficiently during winter.