Ariens 932103 - 624, 932102 - 520 manual Service and Adjustments, Attachment Drive Belt Replacement

Page 18

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read and understand Maintenance and Service/Fuel Safety Rules before proceeding.

ATTACHMENT DRIVE BELT REPLACEMENT

Remove old attachment drive belt:

1.Shut off engine, remove key, disconnect spark plug wire and allow unit to cool completely.

2.Remove belt cover (Figure 4a, 4b).

3.If equipped with chute crank, remove spring clip from chute crank and remove chute crank.

4.Remove hardware securing chute support bracket (and chute crank support, if equipped). Remove discharge chute (Figure 4a, 4b).

5.Remove attachment drive belt from engine sheave (it may be necessary to turn engine sheave using recoil starter handle) (Figure 7).

CAUTION: Always support Sno-Thro frame and blower housing when loosening the cap screws holding them together. Never loosen cap screws while unit is in service position.

6.Support Sno-Thro frame and housing.

7.Loosen bottom cap screws securing auger/impeller housing to frame (Figure 8).

8.Remove top cap screws.

9.Push down on handlebar. Unit will separate. Rest handlebar on the floor.

10.Remove belt from attachment pulley (hold brake away from belt).

Install new attachment drive belt:

1.Place new attachment belt onto attachment pulley.

2.Engage clutch bail to hold brake out of the way and tip unit back together. Secure with cap screws.

3.Place belt onto engine sheave.

4.Make sure engine sheave and attachment pulley align. If alignment is necessary, loosen attachment pulley set screws, reposition pulley and tighten set screws.

5.Reposition and secure belt fingers.

IMPORTANT: Make sure belt fingers are 1/16 in to 1/8 in (1.6-3 mm) from belt when attachment clutch is engaged.

6.Check clutch adjustment. See Attachment Clutch/Brake.

WARNING: AUGER / IMPELLER MUST STOP within 3 seconds when attachment clutch lever is released or unit damage or serious injury may result.

7.Replace discharge chute (and crank, if equipped).

8.Replace belt cover.

8

1

2

7

 

6

 

 

3

5

4

OS1820

 

1. Engine Sheave

 

2. Attachment Pulley

 

3. Idler Adjustment Nut

 

4. Attachment Belt

 

5. Brake Shoe

 

6. Attachment Brake

 

7. Idler Pulley

 

8. Belt Finger

 

Figure 7

GB - 18

Image 18
Contents Sno-Thro Category Walk Behind Snow Thrower Livello di potenza sonora garantito Controls and Features English Français Español932102 Table of Contents IntroductionSafety Safety Decals Locations Safety SécuritéAssembly Safety Rules Operational Safety RulesHazardous Slopes Fuel Safety RulesCleaning TransportStorage Safety Rules AssemblyMaintenance and Service Safety Rules Accessory and Attachment Safety RulesDischarge Chute Check Attachment Clutch CableControls and Features OperationPRE-START Filling Fuel TankStarting and SHUT-OFF Snow Removal TravelingTransport Maintenance Maintenance ScheduleGeneral Lubrication Auger ShaftInstall new attachment drive belt Service and AdjustmentsAttachment Drive Belt Replacement Remove old attachment drive beltAttachment Clutch / Brake Adjustment For Replacement Discharge Chute Shear BoltsTroubleshooting StorageAccessories Service PartsSpecifications Engine TecumsehYear Limited Sno-Thro Warranty DURA-CLEAN Auger Limited Lifetime Warranty
Related manuals
Manual 25 pages 28.84 Kb

932103 - 624, 932102 - 520, 932310 - 624 specifications

Ariens is a well-known brand in the outdoor power equipment industry, particularly recognized for its high-performance snow blowers. Among its notable models, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 stand out for their robust construction and innovative features designed to tackle harsh winter conditions.

The Ariens 932310 - 624 is engineered for heavy-duty snow removal with a 24-inch clearing width and a powerful 624cc engine. This model features a reliable Ariens Polar Engine that provides efficient power and ensures consistent performance even during the coldest months. The durable housing construction, combined with a heavy-duty steel frame, offers superior durability and stability, making it an ideal choice for homeowners and professionals alike.

The 932102 - 520 model, with its 20-inch clearing width, is designed for those who require a more compact yet powerful option. Equipped with a 520cc engine, it provides ample power for residential snow removal tasks. This model includes Ariens' patented Auto-Turn technology, allowing for easy maneuverability around trees, mailboxes, and sidewalks. The lightweight, compact design enables storage in smaller spaces, making it suitable for urban environments.

On the other hand, the Ariens 932103 - 624 combines the best features of performance and versatility. With a larger 24-inch clearing width and a powerful 624cc engine, this model excels in clearing heavy snowfall. It also includes features like adjustable chute control, allowing users to direct snow where they want it to go with minimal effort. The heavy-duty tires provide excellent traction, necessary for navigating slippery driveways and pathways.

All three models come equipped with essential safety features, including an ignition switch and safety key to prevent accidental starts. Their ergonomic handlebars and controls are designed for comfort, ensuring ease of use regardless of the operator's experience level. Additionally, each model boasts a two-stage snow removal system that efficiently manages heavy snow, ensuring effective clearing with every pass.

In summary, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 models bring together powerful engines, durable construction, and advanced technology to provide effective snow removal solutions. They cater to different needs and preferences, making them versatile choices for anyone looking to combat snow build-up efficiently during winter.