Ariens 920022 quick start Step Five Install Remote Deflector Cable

Page 7

Step Five: Install Remote

Deflector Cable Cont.

6.Secure cable eye to control lever with sleeve bushing and hairpin.

7.Using the wire hook attached to the deflector cable, hook cable to discharge chute crank.

8.Install cable into clip on top of discharge chute pedestal.

9.Make sure deflector cable loops above gear cover between cable clip and cable support bracket.

10.Test controls to be sure deflector works properly.

NOTE: If deflector does not follow full range of travel See Remote Discharge Deflector Control Adjustment in Owners Manual.

Image 7

Contents Quick Start Guide Step One Assemble Handlebar Step Two Install Trigger Cable Assembly Step Three Install Discharge Chute Step Four Install Discharge Chute Crank Step Five Install Remote Deflector Cable Step Five Install Remote Deflector Cable Step Six Check Function of Dual Handle Interlock Step Seven Check Track Tension Step Eight Adjust Skid Shoes Step Nine Check Auger Gearcase Oil Step Ten Check Engine Crankcase Oil Step Eleven Fill Engine Fuel Tank Step Twelve Starting Engine Starting Engine / Step a Choke Starting Engine / Step B Rocker Switch Starting Engine / Step C Fuel Shut Off Valve Starting Engine / Step D Key Starting Engine / Step E Prime Starting Engine / Step F Manual Start Starting Engine / Step F Electric Start Starting Engine / Step G Electric Start Starting Engine / Step H Warm up Step Thirteen Stopping the Engine Additional Resources