Ariens 920022 quick start Step Two Install Trigger Cable Assembly

Page 3

Step Two:

Install Trigger Cable Assembly

NOTICE: Trigger cable assembly comes attached to the Sno-Thro unit.

1.Attach remote trigger cable assembly to upper handlebar assembly using one ¼” x 1- ½” oval head machine screw and one ¼” locking washer.

Image 3
Contents Quick Start Guide Step One Assemble Handlebar Step Two Install Trigger Cable Assembly Step Three Install Discharge Chute Step Four Install Discharge Chute Crank Step Five Install Remote Deflector Cable Step Five Install Remote Deflector Cable Step Six Check Function of Dual Handle Interlock Step Seven Check Track Tension Step Eight Adjust Skid Shoes Step Nine Check Auger Gearcase Oil Step Ten Check Engine Crankcase Oil Step Eleven Fill Engine Fuel Tank Step Twelve Starting Engine Starting Engine / Step a Choke Starting Engine / Step B Rocker Switch Starting Engine / Step C Fuel Shut Off Valve Starting Engine / Step D Key Starting Engine / Step E Prime Starting Engine / Step F Manual Start Starting Engine / Step F Electric Start Starting Engine / Step G Electric Start Starting Engine / Step H Warm up Step Thirteen Stopping the Engine Additional Resources