Washing the Atomiser | Unigreen P600, P500, P300, P400 instruction

FIG. 16

B	C

WARNING: using the taps on the pump or in any case on the front of the machine puts the operator near the cardan shaft. Despite the presence of CE standard protective covers you should take great care.

This symbol identifies the clean water tank on the machine used to wash the circuit

4.13 WASHING THE ATOMISER

After every treatment, thoroughly clean the equipment, washing it with water inside and out. Dirty equipment is very dangerous for people and in particular for children.

Discharging the residues of washing in the environment without taking precautions is forbidden as this pollutes water courses. Distribute the residues on the field or the crops where they won’t cause any damage. WARNING: the indications to follow for using chemical products are indicated in paragraph 2.2.1.

4.13.1CIRCUIT WASHER AND TANK WASHER

Some machine models are fitted with a circuit washer tank (FIG.17). This tank must be filled with clean water and used to rinse the entire circuit including the suction, delivery, pump, pressure regulator, jets and nozzles. Thanks to the practical rotary nozzle it also rinses the inside surfaces of the tank.

NB: To completely clean the tank and the pipes of any residues of the various active principles, we recommend adding 2kg of soda to the washing liquid for every 100 L of water.

At the end of the treatment, wash the circuit and the tank.

a)Stop the diaphragm pump disengaging the power-takeoff.

b)Check you have filled the circuit washer tank (C).

c)Make sure the main control of the pressure regulator is OFF and that all the boom sectors are closed.

d)Turn suction deviator A to the circuit washer position (H2O).

e)Start the diaphragm pump by engaging the power-takeoff.

f)Increase the engine speed until all of the liquid in circuit washer tank C has been sucked up.

g)Turn the diaphragm pump off and turn deviator A to the work position (TANK).

h)Turn the main control to ON, so there is pressure in the circuit.

i)Start the diaphragm pump again and use the tank washing tap on the regulator (or on pump P) that supplies jet B.

j)After a few minutes you can close the tank washing tap

k)Distribute the washing residues over a portion of the field where it won’t cause damage.

l)After you have finished washing, stop the diaphragm pump.

NB: at the end of the washing cycle, if there is the risk of frost, pour roughly 500 grams of normal antifreeze for auto vehicles into the tank.

16unigreen

P400, P300, P500, P600 specifications

Unigreen is a leading manufacturer in the agricultural machinery sector, known for its innovative solutions that meet the growing demands of modern farming. Among its impressive lineup, the Unigreen P400, P300, P600, and P500 series have garnered attention for their advanced features, cutting-edge technologies, and exceptional performance.

The Unigreen P400 is a versatile sprayer suitable for medium to large-sized farms. One of its key features is the high-capacity tank that minimizes the need for frequent refills, allowing farmers to cover substantial areas in a single pass. The sprayer is equipped with advanced precision technology that ensures uniform application of chemicals, which is crucial for maximizing crop yield while minimizing waste.

On the other hand, the Unigreen P300 is designed for smaller operations but does not compromise on performance. It boasts a compact design that makes it easy to maneuver in tight spaces. Its lightweight construction facilitates transport, and it incorporates user-friendly controls that enhance the operational experience for farmers. The P300's efficient spraying system reduces drift, ensuring that chemicals are applied exactly where needed, thus protecting the surrounding environment.

Moving onto the P600 model, this sprayer is engineered for large-scale agricultural operations. It features an extensive range of customizable options that cater to specific farming needs. The P600's robust build is complemented by powerful engines that ensure reliability even in demanding conditions. Additionally, it incorporates state-of-the-art GPS and automated guidance systems, allowing for precise inter-row spraying and reducing overlap—this significantly improves efficiency and decreases operational costs.

Lastly, the Unigreen P500 bridges the gap between the P400 and P600, offering advanced technology in a slightly smaller package. One of its standout characteristics is the innovative boom design that provides exceptional stability in various terrains. The sprayer includes advanced monitoring systems that track performance metrics in real-time, enabling farmers to make informed decisions while in the field.

Overall, the Unigreen P series sprayers are distinguished by their user-centric designs, technological advancements, and high-performance capabilities. Their commitment to sustainability and efficiency makes them an excellent investment for progressive farming operations looking to enhance productivity and optimize resource use. Unigreen continues to innovate, ensuring that their products remain at the forefront of agricultural technology.