Unigreen P600 Noise Level of the Machine, Standards of Reference, Instructions, Work Stations

Page 8

Questo simbolo identifica la cisterna di acqua pulita ad uso lavamani presente sulla macchina

8unigreen

3.2NOISE LEVEL OF THE MACHINE

Use earmuffs to protect your ears when using the machine, below you will find the data on the maximum noise levels during work.

Atomisers with centrifugal fan rotor (Turboteuton)

ACOUSTIC POWER LEVEL emitted by the machine: 123,8 dBA in 2nd gear ACOUSTIC POWER LEVEL AT THE OPERATOR’S POSITION emitted by the machine: 103,2 dBA in 2nd gear

Readings taken in accordance with the following standards: Machines Directive 98/37/CE (89/392 CE Dir. re-codified).

Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors.

Legislative Decree D.Lgs. 277/91 on the subject of the protection of workers against the risks deriving from exposure to chemical, physical and biological agents.

3.3STANDARDS OF REFERENCE:

-MACHINES DIRECTIVE 98/37/CEE (89/392 CE Dir. re-codified).

-Directive 86/188/CEE: risks deriving from exposure to noise (implemented in Italy by Legislative Decree D.L 277/1991)

-DPR 547/1955: Regulations for the prevention of accidents and hygiene at work.

-Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors.

-UNI EN ISO 12100-1/Apr.2005 : Machinery safety - Fundamental concepts, general design

principles - Part 1: basic terminology, methodology

-UNI EN ISO 12100-2/Apr.2005 : Machinery safety - Fundamental concepts, general design

principles - Part 2: Technical principles

-UNI EN 294/July 1993: Machinery safety, safe distances to avoid reaching hazardous areas with upper limbs.

-UNI EN 349/June 1994: Machinery safety, minimum spaces to prevent crushing of body parts

-UNI EN 907/Nov.1998: Agricultural and forestry machinery - Sprayers and spreaders of liquid fertilizers - Safety.

-UNI EN 954-1/Dec. 1998 : Machinery safety - Fundamental concepts, general design principles

-UNI EN 982/July 1997: Machinery safety. Safety requisites relevant to systems and their components for hydraulic and pneumatic transmissions. Hydraulics.

-UNI EN ISO 4254-1/June 2006: Agricultural machines - Safety - Part 1: General requisites

-ISO 11684/1995: Pictograms - general principles.

4INSTRUCTIONS

To use the machine the personnel must be suitably trained on the basis of the regulations in force on safety and hygiene at work.

THE USE OF THE MACHINE FOR PERSONS UNDER 18 YEARS OF AGE IS STRICTLY FORBIDDEN

4.1DESCRIPTION OF THE MACHINE

The mistblowers consist of a structural steel frame and a polyester tank reinforced with fibreglass or high-density polyethylene. The frame is hot-galvanised. The tank is easy to empty and this makes it possible to use the machine even on hillsides.

The pumps are generally diaphragm pumps but in some cases they are fitted with pistons. The accessories for completing the fitting, non-drip jets and ceramic nozzles make the UNIGREEN mistblower a highly qualified and efficient piece of equipment.

4.1.1 WORK STATIONS

The use of this machine does not envisage an operator standing constantly near the same, the operator normally sits in the cab of the tractor.

During calibration and maintenance operations the operator will be working near the machine at ground level (for all the calibration and maintenance operations refer to the relevant chapters).

In some special models with controls above 1.5 metres there is a platform to make these operations easier.

This platform must only be used with the machine stopped.

4.1.2 HAND WASHING TANKS

The mistblowers are supplied with an auxiliary hand-washing tank with clean water and a hand tap.

This tank must always be supplied with water and the inside must be clean so you can wash any parts of the body that come into contact with the chemical product used.

Never drink the liquid inside.

Image 8
Contents USE and Maintenance Manual 09/2006Summary Hand Lances Maintenance Product Responsibility Unigreen spa is not responsible if GuaranteeComposition of the Manual Key to the symbols Using Chemical Products Intended USEProhibited USE RecommendationsCharacteristics and Specifications Weather ConditionsDriving on the Road Tables of Fittings AllowedNoise Level of the Machine Standards of ReferenceInstructions Description of the MachineMounted Atomisers Parking Preliminary ChecksTransporting and Moving the Machine Tractor Coupling THREE-POINT CouplingFor verification use the formula shown here Hydraulic Connection to the DistributorsSuction Filter Cardan ShaftPump Pressure Regulator Components of the Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsTank rinsing Ejector Agitator Delivery Filters only Equipped ModelsAuxiliaries Taps Block Test with Clean Water Filling the TankMixing Manual Premixing12.2PREMIXER on Cover Optional 12.4COVER Washer for Chemical ContainersoptionalWashing the Atomiser 13.1CIRCUIT Washer and Tank WasherClutch Blower GroupMultiplier FAN Unit Distributor Accessories Polipo Spalliera Super SpallieraPolipo for Espalier Super Spalliera for EspalierHydraulics OIL Feed from Tractor for hydraulic systemsLOW Volume Conical Nozzles 150-500L/HA Spraying Description of the DiffusersDescription of Type of Jets Description of Type of NozzlesCalibrating Turbo Teuton Speed 6 Km. / hMaintenance Programmed MaintenanceRoutine Maintenance Cleaning the NozzlesExtraordinary Maintenance Putting Back Into Service After Winter LayupMultiplier Lubrication RepairsElectrical and Electronic Apparatus Waste Eeaw Demolition and DisposalMaterials for Demolition Commonly used spare parts Tables for Calibrating Polipo 4+4 8 Nozzles Narrow Rows Tables for Calibrating Polipo 4+4 16 Nozzles Narrow RowsISO 16 Getti Tables for Calibrating Polipo 5+5 10 Nozzles Narrow Rows Tables for Calibrating Polipo 5+5 20 Nozzles Narrow RowsISO Arancio -Orange ISO Giallo -Yellow Tables for Calibrating Super Spalliera 4+4 8 Nozzles Tables for Calibrating Super Spalliera 4+4 16 NozzlesTables for Calibrating RV-GDC 5+5 10 Nozzles Tables for Calibrating RV-GDC 5+5 20 NozzlesPressure Tables of Delivery of Nozzles for Hand LancesTable of Programmed Maintenance Operation 50 h 300 hTAB.17B Allowed Fittings Unigreen Member of the group

P400, P300, P500, P600 specifications

Unigreen is a leading manufacturer in the agricultural machinery sector, known for its innovative solutions that meet the growing demands of modern farming. Among its impressive lineup, the Unigreen P400, P300, P600, and P500 series have garnered attention for their advanced features, cutting-edge technologies, and exceptional performance.

The Unigreen P400 is a versatile sprayer suitable for medium to large-sized farms. One of its key features is the high-capacity tank that minimizes the need for frequent refills, allowing farmers to cover substantial areas in a single pass. The sprayer is equipped with advanced precision technology that ensures uniform application of chemicals, which is crucial for maximizing crop yield while minimizing waste.

On the other hand, the Unigreen P300 is designed for smaller operations but does not compromise on performance. It boasts a compact design that makes it easy to maneuver in tight spaces. Its lightweight construction facilitates transport, and it incorporates user-friendly controls that enhance the operational experience for farmers. The P300's efficient spraying system reduces drift, ensuring that chemicals are applied exactly where needed, thus protecting the surrounding environment.

Moving onto the P600 model, this sprayer is engineered for large-scale agricultural operations. It features an extensive range of customizable options that cater to specific farming needs. The P600's robust build is complemented by powerful engines that ensure reliability even in demanding conditions. Additionally, it incorporates state-of-the-art GPS and automated guidance systems, allowing for precise inter-row spraying and reducing overlap—this significantly improves efficiency and decreases operational costs.

Lastly, the Unigreen P500 bridges the gap between the P400 and P600, offering advanced technology in a slightly smaller package. One of its standout characteristics is the innovative boom design that provides exceptional stability in various terrains. The sprayer includes advanced monitoring systems that track performance metrics in real-time, enabling farmers to make informed decisions while in the field.

Overall, the Unigreen P series sprayers are distinguished by their user-centric designs, technological advancements, and high-performance capabilities. Their commitment to sustainability and efficiency makes them an excellent investment for progressive farming operations looking to enhance productivity and optimize resource use. Unigreen continues to innovate, ensuring that their products remain at the forefront of agricultural technology.